Panasonic KX-DT543, KX-DT346, KX-DT521 Quick Reference Card

Clearlines Telephone Company Inc. 604-277-0022

www.clearlines.com

PANASONIC KX-DT543 / DT346 - QUICK REFERENCE CARD

1 Display
2 Lamp – Flashes Green = Internal Call; Flashes Red = External Call; Solid Red = Message

Waiting.

3 Flexible Buttons –Used for features; status and direct selection of extension or voice

mailbox; call at Incoming Call Distribution group; or to seize an outside line.

4 Headset Hook - Flip if phone is wall mounted.
5 Headset Jack
6 PAUSE – Used to insert pause in stored telephone number.
7 CONF (Conference) – Used for multi-party call
8 MESSAGE – Leave message waiting or call back an extension.
9 FLASH/RECALL – Used to hold the current call make another call.
10 REDIAL – Redial the last dialed number
11 AUTO ANS/MUTE – To set auto-answer in hands-free mode; or mute microphone.
12 TRANSFER – To transfer a call to another party.
13 AUTO DIAL/STORE – To program System and Personal Speed-Dial numbers.
14 HOLD – Places a call on hold
15 INTERCOM – Used to make or receive intercom calls
16 SP-PHONE – For hands-free, speakerphone, operation.
17 Microphone – Used for hands-free, speakerphone operation.
18 Navigator Key –Adjust the volume, display contrast, or select items from menus.
19 ENTER – Used to assign the selected item.
20 Soft-Buttons – Dynamic function keys, used to display options.
21 EHS (Electronic Hook Switch) Jack – Connects to select wireless headsets.
22 FWD/DND - Switch Call Forwarding or Do Not Disturb status.
23 CANCEL – Used to cancel or exit operation.

Clearlines Telephone Company Inc.

604-277-0022 www.clearlines.com

Programming Telephone Buttons

DEPROGRAMMING an existing button

Step 1: With the handset down, Press "PROG" under the display
Step 2: Press the button you want to delete
Step 3: Press CLEAR twice
Step 5: Press Enter

Programming a Speed Dial Button

Step 1: With the handset down, Press "PROG" under the display
Step 2: Press the button you want to program as speed dial button
Step 3: Dial 2 on the key pad
Step 4: Dial 9 then the telephone number you want to program
Step 5: Press the Auto Dial/Store button or ENTER in the display
Step 6: To exit programming, pick up the handset and hang up

Programming an Extension Button

Step 1: With the handset down, Press "PROG" under the display
Step 2: Press the button you want to program as an extension button
Step 3: Dial 1 on the key pad
Step 4: Dial the extension number you want to assign to the button
Step 5: Press the Auto Dial/Store button or ENTER in the display
Step 6: To exit programming, pick up the handset and hang up

Call forwarding your telephone to another extension

ON - Press Intercom * 7102, the extension number and #

OFF - Press Intercom *7100

Call forwarding your telephone to voicemail

ON - Press Intercom * 7102, 165 and #

OFF - Press Intercom *7100

Call forwarding your telephone to an outside number

(only applies if you have PRI lines)

ON - Press Intercom * 7102, 9, telephone number and #

OFF - Press Intercom *7100