Panasonic KX-NT303, KX-DT343, KX-DT346, AK-HC3500E, AK-HC3500ES Quick Reference Manual

...
Quick Reference Guide
Digital Proprietary Telephone
Model No. KX-DT333/KX-DT343/KX-DT346
Thank you for purchasing a Digital Proprietary Telephone (DPT). Please read this manual carefully before using this product and save this manual for future use. For more details, please refer to the manuals of the PBX.
Note:
necessary.
In this manual, the suffix of each model number is omitted unless
Accessories (included)
Handset: 1 Handset Cord: 1 Wall Mounting
Adaptor
Screws for wall: 2 Telephone Line
Cord: 1
: 1
This telephone comes with the wall mounting adaptor already attached. To remove the adaptor, refer to step 1 on page 17.
This unit supports the following optional devices and features:
KX-DT333 KX-DT343 KX-DT346
Features Display 3-Line 3-Line 6-Line Flexible Buttons 24 24 24 LCD Backlight QQ
Options
KX-NT303 Add-on 12 Key Module QQ
KX-NT307 (PSLP1528) Bluetooth Module
KX-DT301 USB Module
*1 *2 *3
®
QQ
QQ
KX-DT390 DSS Console (with 60 keys)
*2
QQQ
Q: Available
*1
The availability of the Bluetooth Module depends on the software version of the connected PBX. Consult your dealer for more details.
For information on connecting, refer to the each included manual.
When connecting DPTs via Digital XDP, this optional device cannot be used.
Trademark:
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under licence.
2
Location of Controls
Location of Controls
V
A
B C
D
E F
G
H
I J
U
S
R
T
K
LMN
<KX-DT346>
A LCD (Liquid Crystal
Display)
B PAUSE: Used to insert a
pause when storing a telephone number. This button is also used for programming this unit.
C
FWD/DND (Call Forwarding/ Do Not Disturb):
Used to set Call Forwarding or Do Not Disturb on your extension.
Q
O
P
E INTERCOM: Used to make
or receive intercom calls.
F AUTO ANS (Auto Answer)/
MUTE: Used to receive an
incoming call in hands-free mode or mute the microphone/handset during a conversation.
G AUTO DIAL/STORE: Used
for System/Personal Speed Dialling or storing
D CONF (Conference): Used
to establish a multiple party conversation.
programme changes.
3
Location of Controls
H TRANSFER: Used to
transfer a call to another party.
I REDIAL: Used to redial the
last dialled number.
J MESSAGE: Used to leave a
message waiting indication or call back the party who left the message waiting indication.
K Headset Jack L FLASH/RECALL: Used to
disconnect the current call and make another call without hanging up.
M HOLD: Used to place a call
on hold.
Q Navigator Key: Used to
adjust the volume and the display contrast or select desired items.
R CANCEL: Used to cancel
the selected item.
S Flexible Buttons: Used to
seize an outside line or perform a feature that has been assigned to the key.
T LCD Panel: Can be adjusted
to the desired angle.
U Soft Buttons (S1-S4): S1-
S4 (located from left to right) are used to select the item displayed on the bottom line of the display.
N SP-PHONE
(Speakerphone): Used for
performing hands-free operations.
O ENTER: Used to assign the
selected item.
P Microphone: Used for
hands-free conversations.
V Message/Ringer Lamp:
When you receive an intercom call, the lamp flashes green, and on an outside call, the lamp flashes red. When someone has left you a message, the lamp stays on red.
4
Settings
Settings
Speaker volume
While in a hands-free conversation
Handset/Headset volume
Ringer volume
While using the handset or headset
While on-hook or receiving a call
LCD Contrast While on-hook
PAUSE PAUSE
Ring Tone
PAUSE
(CO)
INTERCOM
OR
OR
Press Up to increase or Down to decrease the volume.
PAUSE
OR
AUTO DIAL
Press 2 times.
LCD Backlight
If you hear your own voice through the handset or headset, decrease the
While on-hook
PAUSE
OR
AUTO DIAL
STORE
PAUSE
OR
AUTO DIAL
STORE
STORE
Automatic
Always ON
Always OFF
volume.
For KX-DT343/KX-DT346 only.
5
Features List
(
)
(
)
Features Lis t
Icon Meanings
= Flexible button = Off-hook = On-hook
CO
= Feature number = Talk = Confirmation Tone
C. Tone
Making Calls
Calling
To an extension To an outside party
extension no.
REDIAL
quick dialling no.
CO
Redial
Quick Dialling
One-touch Dialling
outside phone no.
To st o re
PAUSE PAUSE
(CO)
desired no.* (max. 32 digits)
* Enter outside line access
number before outside phone number.
AUTO DIAL
STORE
To dial
assigned as a
(One-touch Dialling)
One-touch Dialling button
Personal Speed Dialling
To st o re
personal speed
dialling no. (2 digits)
* Enter outside line access number before
desired phone no.*
(max. 32 digits)
outside phone number.
C. Tone
To dial
AUTO DIAL
personal speed
STORE
dialling no. (2 digits)
6
Features List
System Speed Dialling
To dial
AUTO DIAL
system speed
STORE
During a Conversation
To hold To retrieve a call at the holding extension
dialling no. (3 digits)
Doorphone Call
doorphone no. (2 digits)
C. Tone
Call Hold
HOLD
(CO)
C. Tone
INTERCOM
/
To retrieve an outside call from another extension
(CO)
Call Transfer
TRANSFER
C. Tone
extension no.
(CO)
phone no.
outside
To an extension
To an outside party
Useful Features
Multiple Party Conversation
To add other parties during a conversation (i.e., conference)
CONF CONF
C. Tone C. Tone
desired
phone no.
Talk to the new party.
Talk with
multiple parties.
To leave a conference
CONF
C. Tone
7
Features List
Setting the Telephone According to Your Needs
Do Not Disturb
Both Calls
Outside Calls
Intercom Calls
Timed Reminder
To set
12 H
hour/minute
(4 digits)
24 H
hour/minute
(4 digits)
Set
Cancel
AM
PM
C. Tone
Once
Daily
C. Tone
To cancel To stop or answer the ring back
INTERCOM
C. Tone
/
Before Leaving Your Desk
Call Forwarding
Both Calls
Outside Calls
Intercom Calls
All calls
Busy
extension no.
OR
No answer Busy/
No answer
Cancel
8
outside line access no.
outside phone no.
C. Tone
Loading...
+ 16 hidden pages