Panasonic H-HS030PP, H-HS030E, H-HS030GK, H-FS35100PP, H-FS35100E Service Manual

© Panasonic Corporation 2015 Unauthorized copy­ing and distribution is a violation of law.

Order No.DSC1504011CE

B26

Interchangeable Lens for Digital Camera

Model No. H-HS030PP

H-HS030E
H-HS030GK

2

TABLE OF CONTENTS

PAG E PAG E

1 Service Navigation------------------------------------------------3

1.1. Introduction --------------------------------------------------3

1.2. Important Notice --------------------------------------------3

2 Operating Guide --------------------------------------------------- 4

2.1. Before Use ---------------------------------------------------4

2.2. Cautions For Use-------------------------------------------5

2.3. Components -------------------------------------------------6

3 Service Fixture and Tools --------------------------------------8

3.1. Service Fixture and Tools --------------------------------8

3.2. Clean Box ----------------------------------------------------8

4 Disassembly and Assembly Procedure -------------------9

4.1. Outline --------------------------------------------------------9

4.2. Disassembly procedure--------------------------------- 11

4.3. Assembly procedure------------------------------------- 13

5 Maintenance ------------------------------------------------------ 16

5.1. Lens Cleaning--------------------------------------------- 16

3

1 Service Navigation

1.1. Introduction

This service manual contains technical information, which allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by supplement service manual.

1.2. Important Notice

1.2.1. About LENS MAIN UNIT (Ref. 202)

1. LENS MAIN UNIT (Ref. 202) is not supplied due to difficulty of the transportation issue (Fragile, Dust-free packing), and
requires critical lens adjustments.
Therefore, any needs of the "LENS MAIN UNIT" (Ref. 202), carefully confirm its performance in advance.

2. Once "LENS MAIN UNIT" (Ref. 202) is confirmed as defective, place order "LENS UNIT" (Ref. 200) and replace SHADING
FRAME (Ref. 206), to maintain Serial number of owner's original lens.

3. No adjustment is required when replacing the part mentioned on Fig.1-1. But, when tighten the concerned screws,apply
proper torque mentioned on "4. Disassembly and Assembly Instruction" section.

4

2 Operating Guide

2.1. Before Use

5

2.2. Cautions For Use