Panasonic HDC-SD90P Operating Instruction

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
Owner’s Manual
Model No.HDC-SD90P/PC
HDC-TM90P/PC
Before connecting, operating or adjusting this product, please read the instructions completely.
VQT3J56
Things You Should
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Know
Thank you for choosing Panasonic!
You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Pleas e take time to fill in the information on the right. The serial number is on the tag loca te d on the underside of your camera. Be sure to retain this manual as your convenient camera informat ion source.
Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No.
Safety Precautions
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE T HE C O VER (OR BAC K); THE R E AR E NO U S ER S ERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
2
VQT3J56
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
HDC-SD90P
HDC-TM90P
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B dig i tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radia te radio fr equenc y energy and, if not inst alled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa tion. If this equipment does cause harmful interference to radio or television recept ion, whic h ca n be determin ed b y tur ning th e eq uipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, follow the at tached installation
instructions and use only shielded interface cables with ferrite
core when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the us er’s authority to operate this equipment. Declaration of Conform ity Trade Name: Panasonic Model No.: HDC-SD90P/HDC-TM90P Responsible party: Panasonic Corporation of North Amer ica
One Panasonic Way, Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company
1-800-211-PANA (7262) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This dev ice may not c ause harmf ul interfer ence, and (2) this device mus t accept any interference received, including interference that may cause undesired operation.
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
VQT3J56
3
AC adaptor
This AC adaptor operates on AC between 110 V and 240 V. But In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power
supply only.
When connecting to an AC supply out side of th e U.S .A. or Canada , use a plu g ada ptor to
suit the AC outlet configuration.
When connecting to a supply of greater than AC 125V, ensure the cord you use is suited
to the voltage of the AC supply and the rated current of the AC adaptor.
Contact an electrical parts dis tributor for assistance in selecting a s uitable AC plug
adaptor or AC cord set.
The unit should be install ed near an accessible AC power outlet, with the power cord connected directly to i t. To completely disconnect power from the unit, unplug the power cord from the AC power outlet.
Concerning the battery
Battery pack (Lithium ion battery pack)
Use the specified unit to recharge the battery pack.Do not use the battery pack with equipment other than the specified unit.Do not get dirt, sand, liquids, or other foreign matter on the terminals.Do not touch the plug terminals (i and j) with metal objects.Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come int o con tac t wit h yo ur hands or cl othes, wash i t off th oroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC (140 oF) or incinerate.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Product Identification Marking
Product Location
High Definition Video Camera Battery holder AC adaptor Bottom
4
VQT3J56
U.S.A./CANADA CONSUMERS: ATTENTION:
A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.
<For USA-California only>
This product contains a CR Coin Cell Lithium Batte ry which contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardous waste/perchlorate
.
VQT3J56
5
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these inst ructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilat i on openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided fo r your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
11) O nl y us e attachments/a c cessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damage d in any way, s uc h as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exp osed to rain or moisture, does not operate normally, or has been dropped.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience recept acles, and the point where they exit fr om the apparatus.
6
VQT3J56
Precautions
WARNING
CAUTION
USE & LOCATION
TO AVOID SHOCK HAZARD ... Your
camera and power supply shoul d not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, howeve r it is not designed to sust ain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing fro m a pool or even a cup of coffee. This action could permanently damage the internal parts of your camera. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug your camera from the power supply before cleaning.
AS WITH ANY SMALL OBJECT, SD
CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT ALLOW CHILDREN TO HANDLE THE SD CARD.
DO NOT AIM YOUR CAMERA AT THE
SUN OR OTHER BRIGHT OBJECTS
DO NOT EXPOSE YOUR CAMERA TO
EXTENDED HIGH TEMPERATURE ...
Such as, in direct sunlight, inside a closed car, ne xt to a heater, etc... This action could permanently damage the i nternal parts of your camera.
AVOID SUDDEN CHANGES IN
TEMPERATURE ... If the unit is suddenly
moved from a cold place to a warm place, moisture may form on the SD card and inside the unit.
DO NOT LEAVE YOUR CAMERA OR
THE POWER SUPPLY TURNED ON WHEN NOT IN USE.
STORAGE OF YOUR CAMERA ... Store
and handle your camera in a manner tha t will not subject it to unnecessary movement (avoid shaking and striking). Y our camera contains a sensitive pick-up device which could be damaged by improper handling or storage.
CARE
TO CLEAN YOUR CAMERA ... Do not
use strong or abrasive detergents when cleaning your camera body.
TO PROTECT THE LENS ... Do not touch
the surface of the lens with your hand. Use a commercial camera lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.
TO PROTECT THE FINISH OF YOUR
CAMERA ... Before handling your
camera, make sure your hands and face are free from any chemical prod ucts , su ch as suntan lotion, as it may damage the finish.
-If you see this symbol-
Information on Dispos a l in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
VQT3J56
7
About the recording format for
HDC-TM90
HDC-SD90
recording motion pictures
Y ou can select from AVCHD, 1080/60p or iFrame recording formats to record motion pictures using this unit. (l 49, 60)
AVCHD:
Y ou can record high defi nition qua lity images with this format. It is suitab le for viewing on a large format TV or for saving to disc.
1080/60p:
This is a 1080/60p (1920k1080/60 progressive) recordin g mode that can record in maximum quality*. 1080/60p motion pictures can be saved and played back with this unit or the HD Writer AE 3.0. * This means the highest qual ity for this unit.
iFrame:
This is a recording format suitable for viewing and editing on a Mac (iMovie’ 11). Using iMovie’1 1, iFrame mot ion pictu res can be imported faster than AVCHD motion pictures. Also, the imported file size of iFrame motion pictures will be smaller than that of AVCHD motion pictures. It is not compatible with motion pictures
recorded in AVCHD or 1080/60p format.
Indemnity about recorded
content
Panasonic does not ac ce pt any responsibilit y for damages directly or indirectly due to any type of problems that resu lt in los s of recording or edited content, and does not gu arantee any conten t if recording or editing does not work properly. Likewise, the above also applies in a case where any type of rep air is made to the un it (in cludi ng any other non-built-in memory related component).
Handling of built-in memory
[HDC-TM90]
This unit is equipped with the built-in memory. When using this component, pay attention to the following points.
Back up data periodically.
The built-in memory is temporary storag e. In order to avoid erasing dat a due to static electricity, electromagnetic waves, breakage, and fa ilures, b ack up the da ta t o a PC or DVD disc. (l 106, 118 )
Access lamp [ACCESS] (l18) illuminates
while the SD card or built-in memory is
8
VQT3J56
being accessed (initialization, recording, playback, deleting etc.). Do not perform the following operations when the lamp illuminates. It may damage the built-in memory or cause a malfunction in the unit.
jTurn the unit off (remove the batt e ry ) jInsert and remove the USB cable jExpose th e un i t to vibrations or sho c k
About disposing of or giving away this unit. (l143)
Cards that you can use with
this unit
SD Memory Card, SDHC Memory Card and SDXC Memory Card
4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.
Refer to page 22 for more details on SD cards.
For the purposes of this
owner's manual
SD Memory Card, SDHC Memory Card
and SDXC Memory Card are referred to as the “SD card”.
Function that can be used for Motion
Picture Recording Mode: Function that can be used for S till Picture Recording Mode:
Function that can be used for Motion
Picture Playback Mode: Function that can be used for S till Picture Playback Mode:
Pages for reference are indicated by an
arrow, for example: l 00
This owner's manual is designed for use with models and . Pictures may be slightly different from the original. The illustrations used in this owner's
manual show model , however, parts of the explanation refer to different models.
Depending on the model, some
functions are not available.
Features may vary, so please read
carefully.
Not all models may be available
depending on the region of purc hase.
HDC-SD90
Contents
Accessories................. ........................... 11
Quick Guide....... ... .. ... ................. ... ... .. .... 12

Advanced (Recording)

PreparationBasicAdvanced

Preparation

Parts identificat ion and handling ..... ... . 16
Power supply.. ... ... ................................. . 19
Inserting/removing the battery.......... 19
Charging the battery ........................ 20
Charging and recording time............ 21
Recording to a card ............................... 22
Cards that you can use
with this unit ..................................... 22
Inserting/removing an SD card......... 23
Turning the unit on/off........................... 24
Turning the unit on and off with
the power button .............................. 24
Turning the unit on and off with
the LCD monitor................... ............ 24
Selecting a mode ................................... 25
How to use the touch screen................ 25
About the Touch Menu ..................... 26
Setting date and time............................. 27

Basic

Before recording.................................... 28
Selecting a media to record
[HDC-TM90] ............................................ 29
Recording motion pictures ................... 30
Recording still pictures......................... 32
Recording still pictures in Motion Picture Recording Mode... 33
Intelligent Auto Mode ............................ 34
Motion picture/
Still picture playback............................. 36
Using the menu scre e n ................ ......... 39
Using the Setup M enu .... ... .. .................. 40
Zoom in/out function............................. 47
Extra Optical Zoom.......................... 47
Image Stabilizer Function..................... 48
1080/60p recording................................ 49
Recording with the Touch function...... 50
T o uch function icons ........................ 50
Recording functions
of operation icons ................................. 53
Operation icons........ ................. ... .... 53
Recording functions of menus............. 59
Manual recording................................... 73
White balance .................................. 74
Manual shutter speed/
iris adjustment.................................. 75
Manual focus adjustment................. 76
Recording 3D video............................... 77
Functions not available
during 3D recording ......................... 79

Advanced (Playback)

Playback Operatio ns....... ................. ..... 80
Motion picture playback
using operation icon......................... 80
Creating still picture
from motion picture.......................... 81
Highlight & Time frame index........... 82
Repeat playback................... ........... 82
Resuming the previous playback..... 83
Zooming in on a still picture during playback
(Playback zoom) .............................. 83
Various playback function s ........ ... ... .... 84
Playing back motion pictures/
still pictures by date ............... .......... 84
Highlight Playbac k ............... .. .......... 85
Changing the playback settings and
playing back the slide show............. 87
(Recording)
(Playback)
Copy/DubbingWith a PCOthers Advanced
VQT3J56
9
Deleting scene s/ sti ll p ic t ure s .............. . 89
Dividing a scene
(AVCHD, 1080/60p) ......................... 90
Dividing a scene to partial l y delete
(iFrame) ........................................... 91
Deleting personal information .......... 92
Protecting scenes/sti ll pi ctures......... 92
DPOF setting .......................................... 93
Relay scene combining
[HDC-TM90] ............................................ 94
Watching Video/
Pictures on your TV............................... 96
Connecting with a
HDMI mini cable............................... 99
Connecting with the
AV multi cable .................................. 99
Playback using VIERALink
3D video playback................................ 102
Functions not available
during 3D playback ........................ 103
............. 100

Copy/Dubbing

Copying between SD card and Built-in
Memory [HDC-TM90]............................ 104
Connecting a DVD burner
to copy to/play back a disc................. 106
Preparing for copying/
playing back ................................... 106
Copying to discs............................. 108
Playing back the copied disc.......... 110
Managing the copied disc.............. 111
Dubbing with a Blu-ray disc recorder,
video device, etc . ...... ... ... ... .................. 112
3D video storage ................................ .. 116

Others

Indications............................................ 131
Messages ............................................. 134
About recovery............................... 135
Troubleshooting .................................. 136
Cautions for use .................................. 142
About copyright................................... 148
Recording modes/approximate
recordable time .................................... 149
Approximate number of recordable
pictures................................................. 150
Specifications ...................................... 151
Optional accessories .......................... 155
Accessory Order Form (For USA and
Puerto Rico Customers) ................ 158
Limited Warranty (ONL Y FOR U.S.A.
AND PUERTO RICO)............................ 159
Warranty
(For Canadian Customers).................. 161
Index ..................................................... 162
Spanish Quick Use Guide/
Guía española para el uso rápido ...... 164

With a PC

What you can do with a PC ................. 118
End User License Agreement........ 120
Operating environment ....................... 121
Installation ............................................ 124
Connecting to a PC.............................. 126
About the PC display ..................... 128
Starting HD Writer AE 3.0.. ................ .. 129
Reading the operating instructions
of the software applications........... 129
If using Mac .......................................... 130
10
VQT3J56

Accessories

Check the accessories before using this unit. Keep the accessories out of reach of children to prevent swallowing. Product numbers correc t as of Jan. 2011. These may be subject to change.
Battery pack
VW-VBK180
AC adaptor
VSK0711
AC cable
K2CA2CA00025
AV multi cable
K1HY12YY0008
USB cable
K1HA05AD0007
Stylus pen
VGQ0C14
This is used for operations that are hard to
operate with your fingers or performing detailed operation s wit h the touch screen operation. (l 25, 46)
Shoe adaptor
VYC1055
CD-ROM
Software
11
VQT3J56

Quick Guide

Inserting the battery
Install the battery by inserting it in the direction shown in the figure.
A Insert the battery until it clicks and locks.
Charging the battery
B DC input terminal
1 Connect the AC adaptor to the DC inp ut
terminal.
2 Connect the AC cable to the AC
adaptor, then the AC outlet.
The status indicator will flash red at an
interval of 2 seconds, indicating that charging has begun. It will turn off when the charging is completed.
Inserting/removing an SD card
Access lamp [ACCESS] A
When this unit is accessing the SD
card or built-in memory, the access lamp lights up.
Check that the access lamp has gone off.
1) Open the SD card cover and insert (remove) the SD card into (from) the card slot B.
Face the label side C in the direction
shown in the illustration and press it straight in as far as it will go.
Press the center of the SD card and then
pull it straight out.
2) Securely close the SD card cover.
Securely close it until it clicks.
12
VQT3J56
Turning the unit on/off
Turning the unit on and off with the power button
Open the LCD monitor and press the power button to turn on the unit.
A The status indicator lights on. To turn off the unit, hold down the power
button until the status indicator goes off.
Turning the unit on and off with the LCD monitor
Opening the LCD monitor turns on the unit. Closing the LCD monitor turns off the unit.
To turn on the unit
A The status indicator lights on.
Selecting a mode
Operate the mode switch to change the mode to , or .
Motion Picture Recording Mode (l 30)
Still Picture Recording Mode (l 32)
Playback Mode (l 36, 80)
How to use the touch screen
You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers.
Touch
T ouch and release t he touch scr een to select icon or pictur e.
To turn off the unit
B The status indicator goes off.
Slide while touching
Move your finger while pr essing on t he touch screen.
13
VQT3J56
Touch Menu
MENU
Touch to display the Touch Menu. Touch (left side)/ (rig ht s ide) of on the Touch Menu to switch the operation icons.
T
W
A Touch Menu
Recording motion pictures
1) Change the mode to .
2) Open the LCD monitor.
3) Press the recor ding start/stop button to start recording.
Language selection
1) Touch [MENU], then touch [SETUP] # [LANGUAGE].
2) Touch desired language.
Selecting a media to record
[HDC-TM90]
1) Change the mode to
2) Select the menu.
: [MEDIA SELECT]
3) Touch the media to record motion pictures or still pictures.
Touch [VIDEO/SD C A R D] or [PICTURE/
SD CARD] to record to the SD card. Touch [VIDEO/Built-inMemory] or [PICTURE/Built-inMemory] to record to the built-in memory.
The media is selected separately to
motion pictures or still pictures is highlighted in yellow .
4) Touch [ENTER].
or .
A When you begin recording, ; changes
to ¥.
Recording still pictures
1) Change the mode to .
2) Open the LCD monitor.
3) Press the button fully to take the picture.
14
VQT3J56
Motion picture/Still picture
HDC-SD90
HDC-TM90
ALL
0h01m30s0h01m30s0h01m30s
playback
1) Change the mode to .
2) Touch the play mode select icon A.
ALL
3) Select the [VIDEO/PICTURE] you wish to play back.
Select the [MEDIA ] and [VIDEO/ PICTURE] you wish to play back.
Touc h [ENTER].
4) Touch the scene or the still pictur e to be played back.
Operation icons and screen display will
disappear when no function is performed for a specific period of time. To display them again, touch the screen.
(Motion picture playback)
1/;: Playback/Pause 6: Rewind playback 5: Fast forward playback ∫: Stops the playback and shows
the thumbnails.
(Still picture pl ayback) 1/;: Slide show (playback of the still
pictures in numerical order) start/ pause.
2;: Plays back the previous picture. ;1: Plays back the next picture. ∫: Stops the playback and shows
the thumbnails.
B
is displayed when [1 080/60p] is touched, is displayed when [AVCHD] is touched or is displayed when [iFrame] is touc hed in step 3.
To display the next (previous) page:
jSlide the thumbnail display upward
(downward) while touching it
jSwitch the Touch Menu, and then
touch (up) / (down) of the thumbnail scroll lever
5) Select the playback operation by touching the operation icon.
C Operation icon
15
VQT3J56
Preparation
2
4 5 6
3
7
1
MIC
AV MULTI
9
810

Parts identification and handling

1 Power button [ ] (l 24) 2 Shoe adaptor release lever
[SHOE ADAPTOR RELEASE] (l 157) 3 USB terminal [ ] (l 107, 112, 126) 4 Intelligent auto/Manual button
[iA/MANUAL] (l 34, 73) 5 Optical image stabilizer button
[ O.I.S.] (l 48) 6 1080/60p button [1080/60p] (l 49) 7 Battery release lever [BATT] (l 19) 8 HDMI mini connector [HDMI]
(l 96, 100) 9 A V multi connector [AV MUL TI] (l 96,
115)
Use the AV multi cable (only the supplied
cable).
10 Microphone terminal [MIC]
A compatible plug-in powered mic rophone
can be used as an external microphone.
Audio will be stereo (2 ch) with the
external microphone input.
(Microphone input level
meter) is displayed when the extern al microphone is connected. (l 67)
When the unit is connected with the AC
adaptor, sometimes noise may be heard depending on the micr ophone ty p e. In th is case, please switc h to the ba tte ry for th e power supply and the noise will stop.
16
VQT3J56
11 Speaker
11
12
13 14
15 16
17
18
19
20
2221

12 Lens cover
The lens cover opens in Motion
Picture Recording Mode or Still Picture Recording Mode. (l 25)
13 Built-in flash (l 55) 14 Step up ring attachment part
(concave) 15 Lens 16 Internal stereo microphones 17 Video light (l 58 , 72 )
18 Shoe adaptor mount
[SHOE ADAPTOR] (l 157) 19 Status indicator (l 24) 20 Recording start/stop button (l 30) 21 LCD monitor (Touch screen) (l 25)
It can open up to 90o.
It can rotate up to 180o A towards the lens
or 90o B towards the opposite direction.
Due to limitations in LCD production technology , t here may be some ti ny bright or dark spots on th e L CD monit or scr een. However, t his is not a malfunction and does not affect the recorded picture.
22 Battery holder (l 19)
17
VQT3J56
24
23
25
26
28
27
30
31
29
23 Tripod receptacle
If you attach a tripod with a 5.5 mm
(0.22 q) screw or larger, it may damage this unit.
24 SD card cover (l 23) 25 Access lamp [ACCESS] (l 23) 26 Card slot (l 23)
27 Photoshot button [ ] (l 32) 28 Zoom lever [W/T] (In Motion Picture
Recording Mode or Still Picture
Recording Mode) (l 47)
Thumbnail display switch [ / ]/
Vo lume lever [sVOLr] (In Playback
Mode) (l 37) 29 Mode switch (l 25) 30 Grip belt
Adjust the length o f the grip bel t so tha t it fits your hand.
18
VQT3J56
1 Flip the belt. 2 Adjust the length. 3 Replace the belt.
31 DC input terminal [DC IN] (l 20)
Do not use any other AC adaptors except
the supplied one.
Preparation
Removing the battery
Be sure to hold down the power button until the status indicator goes off. Then remove the battery while suppo rti n g th e un i t to prevent it from dr o p ping.
Move the battery release lever in the direction indicated by the arrow and remove the battery when unlocked.
ャモヵヵ
A Insert the battery unti l it
clicks and locks.

Power supply

About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBK180/VW-VBK360. The unit has a function for distinguishing batteries which can be used safely. The
dedicated battery (VW-VBK180/VW-VBK360) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic. (Batteries which do not support this function cannot be used). Panasonic cannot in any way guarantee the quality, performance or safety of batteries which have been manufactured by other companies and are not genuine Panasonic products.
It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any ac cident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.

Inserting/removing the battery

Press the power button to turn off the unit. (l 24)
Install the battery by inserting it in the direction shown in the figure.
19
VQT3J56

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time.
Important:
Use the supplied AC adaptor. Do not use the AC adaptor of another device.Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.
The battery can also be charged using a battery charger (VW-BC10PP; optional).The battery will not be charged if the unit is turned on.It is recommended to charge the battery in a temperatu re between 10 °C to 30 °C
(50 °F to 86 °F). (The battery temperature should also be the same.)
A DC input terminal
Insert the plugs as far as they will go.
1 Connect the AC adaptor to the DC input terminal.
Be careful not to pinch the DC input terminal cover.
2 Connect the AC cable to the AC adaptor, then the AC outlet.
The status indicator will flash red at an interval of 2 seconds, indicating that ch arging has
begun. It will turn off when the charging is completed.
Connecting to the AC outlet
It is possible to use this unit with power supplied fr om the AC ou tlet by t urning on th e unit with the AC adaptor connected.
If the status indicator flashes at a particularly fast or slow rate, refer to page 145.We recommend using Panasonic batteries (l 11, 21, 155).If you use other batteries, we cannot guarantee the quality of this product.Do not heat or expose to flame.Do not leave the battery(ies) in an automobile ex posed to direct sunlight for a long period
of time with doors and windows closed.
20
VQT3J56

Charging and recording time

Charging/Recording time
Temperature: 25 oC (77 oF)/humidity: 60%RHThe stated times are when the AC adapto r is used.
Battery model
number
[Voltage/Capacity
(minimum)]
Supplied battery/
VW-VBK180
(optional)
[3.6 V/1790 mAh]
VW-VBK360
(optional)
[3.6 V/3580 mAh]
These times are approximations.The indicated charging time is f or when the batter y has been disc harged compl etely.
Charging time and recordable time vary depending on the usage conditions such as high/low temperature.
Recordable time of 3D recording mode is the same.
(During 3D recording mode, 1080/60 p and iF rame recording mode cannot be used.)
The actual recordable time refers to the recorda ble t ime when repeat ed ly st art ing/s toppin g
recording, turning the unit on/off, moving the zoom lever etc.
The batteries heat up after use or charging. This is not a malfunction.
Charging
time
2h25min
4h20min
Recording
mode
[1080/60p] 1 h 30 min 45 min
[HA], [HG],
[HX], [HE]
[iFrame] 1 h 40 min
[1080/60p] 3 h 1h 35 min
[HA], [HG],
[HX], [HE]
[iFrame] 3h25min 1h45min
Maximum
continuous
recordable time
1h35min
3h15min 1h40min
Actual
recordable
50 min
time
Battery capacit y indica tion
The display changes as the battery capacity reduces.
####
If there is less than 3 minutes rema ining, then will become red. If the battery discharges, then will flash.
The remaining battery capacity is displayed when using the Panasonic battery that you
can use for this unit. The actual time can vary depending on your actual use.
When using the AC adaptor or batteries made by other companies, the remaining
battery capacity will not be shown.
VQT3J56
21
Preparation
32

Recording to a card

The unit can record still pictures or motion pictures to an SD card or bui lt-in memory. To record to an SD card, read the following.
This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC memory card with other equipment, ch eck the equipment is compatible with these memory cards.

Cards that you can use with this unit

Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture record ing.
Card type Capacity
8MB/16MB/
32 MB
SD
Memory Card
SDHC
Memory Card
SDXC
Memory Card
* SD Speed Class Rating is the speed
standard regarding continuous writing. Check via the label on the card, etc.
64 MB/128 MB/
256 MB
512MB/1GB/
2GB
4 GB/6 GB/8 GB/
12 GB/16 GB/
24 GB/32 GB 48 GB/64 GB
Motion picture
recording
Cannot be used. Cannot be guaranteed in
operation.
Can be used. Can be used.
e.g.:
Still picture
recording
Cannot be guaranteed in operation.
Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/
SDXC Memory Cards that can be used for motion picture recording on the following website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.) 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory
Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.
When the write-protect switch A on SD card is locked, no recording,
deletion or editing will be possible on th e card.
Keep the Memory Card out of reach of children to prevent swallowing.
22
VQT3J56

Inserting/removing an SD card

When using an SD card not from Pana sonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 44, 45) When the SD card is formatted, all of the rec orded data is deleted. Once the dat a is deleted, it cannot be restored.
Caution: Check that the access lamp has gone off.
Access lamp [ACCESS] A
When this unit is accessing the SD
card or built-in memory, the access lamp lights up.
1 Open the SD card cover and
insert (remove) the SD card
into (from) the card slot B.
Face the label side C in the direction
shown in the illustration and press it straight in as far as it will go.
Press the center of the SD card and then
pull it straight out.
2 Securely close the SD card
cover.
Securely close it until it clicks.
Do not touch the terminals on the back of
the SD card.
Do not apply strong shocks, bend, or drop
the SD card.
Electrical noise, static electricity or the
failure of this unit or the SD card may damage or erase the dat a st ored on the SD card.
When the card access lam p is lit, do not:
jRemove the SD card jTurn the unit off jInsert and remove the USB cable jExpose the unit to vibrations or shock
Performing the above while the lamp is on may result in damage to data/SD card or this unit
Do not expose the terminals of the SD
card to water, dirt or dust.
Do not place SD cards in the following
areas:
jIn direct sunlight jIn very dusty or humid areas jNear a hea ter jLocations susceptible to significant
difference in temperat ure (cond ensation
can occur.)
jWhere static electricity or
electromagnetic waves occur To protect SD cards, return them to their
cases when you are not using th em.
About disposing of or giving away the SD
card. (l 146)
VQT3J56
23
Preparation
To turn off the unit
Hold down the power button until the status indicator goes off.

Turning the unit on/off

Y ou can turn the unit on and off using the power button or by opening and closing the LCD monitor.
A clicking sound is heard when the unit is shaken.
This is the sound of the lens moving an d i s not a defect.
This sound will no longer be heard when the unit is turned on and change the mode to
or .

Turning the unit on and off with the power button

Open the LCD monitor and press the power button to turn on the unit.
A The status indicator lights on.

Turning the unit on and off with the LCD monitor

The unit is turned on when the LCD monitor is opened, and the unit is turned off when it is closed.
During normal use, opening and closing of the LCD monitor can be conveniently used to turn the unit on/off.
To turn on the unit
To turn off the unit
A The status indicator lights on.
The unit will not turn off while recording motion pictures even if the LCD monitor is closed.In the following cases, opening t he L CD monit or does not t urn on the un it. P ress t he power
button to turn on the unit.
jWhen the un i t i s originally purchased jWhen you have turned off the unit using the power button
To turn off the unit while connecting an ext ernal microphone with the MIC terminal, press
the power button.
24
VQT3J56
B The status indicator goes off.
Preparation

Selecting a mode

Slide the mode switch to switch between recording and playback.
Operate the mode switch to change the mode to , or .
Motion Picture Recording Mode (l 30) Still Picture Re co rding Mode (l 32)
Playback Mode (l 36, 80)
Preparation

How to use the touch screen

You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detaile d operati on or if it is hard to oper ate with your fingers.
Touch
T ouch a nd releas e the touch screen to sele ct icon o r picture.
Touch the center of the icon.Touc hing the touch screen will not operate while
you are touching another part of the touch screen.
Slide while touching
Move your finger while pressing on the touch screen.
25
VQT3J56
About the operation icons
MENU
ALL
///: These icons are used to switch the menu and thumbnail display page, fo r item selection and setting etc.
: Touch to return to the previous screen such as when setting menus.

About the Touch Menu

Touch (left side)/ (right side) of on the Touch Menu to switch the operation icons.
Touch (left side)/ (right side) of on the Touch Menu.
It is also possible to swit ch the operation icons by sliding the Touch Menu right or left while
touching it.
A Touch Menu
T
W
Recording Mode Playback Mode
T
W
FOCUS
WB
SHTR
IRIS
MENU
B Touch these icons to switch pages upward or downward. C Displayed only during the Manual Mode.
To display the Touch Menu
The Touch Menu will disappear when n o function is performed for a specific period of time during Recording Mode. To display it again, touch .
Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.
26
VQT3J56
Perform the touch screen c alibration when the touch is not recognized or wrong location is
MENU
recognized. (l 46)
Preparation

Setting date and time

When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time.
1 Select the menu. (l 39)
: [SETUP] # [CLOCK SET]
2 Touch the date or time to be set, then set the desired value using
/.
A Displaying the World time setting (l 40):
[HOME]/ [DESTINATION]
The year can be set between 2000 and 2039.The 12-hour system is used to display the time.
3 Touch [ENTER].
A message prompting for World time setting may be
displayed. Perform the World time setting by touching the screen. (l 40)
Touch [EXIT] to complete the setting.
The date and time function is driven by a built-in lithium battery.When this unit is purchased, the clock is set. If the time display becomes [- -], the built-in
lithium battery needs to be cha rged. To recharge the built-in lithium battery, connect the AC adaptor or attac h the b at ter y t o this unit . Leav e the uni t as it is fo r ap pro x. 2 4hours and the battery will maintain the date and time for approx. 4 months. (The battery is still being recharged even if the unit is off.)
27
VQT3J56
Basic


Before recording

Basic cam era positi oning
1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 It is convenient to use the Recording button icon A when holding the unit at waist level.
When recording, make sure your footing is stab le and there is no danger of colliding with
another person or objec t.
When you are outdoors, record pictures with the sunlight behind you. If the subject is
backlit, it will become dark in the recording.
Keep your arms near your body and separate your legs for better balance.Do not cover the microphones with your hand etc.
Basic motion picture recording
The unit should normally be held steady when recording.If you move the unit when recording, do so slowly, maintaining a constant speed.The zoom operation is use ful f or reco rding sub jec ts yo u ca nnot get cl ose to, bu t overu se o f
zoom in and zoom out can make the resulting motion picture less enjoyable to watch.
Recording Yourself
Rotate the LCD monitor towards the lens side.
The image is horizontally flipped as if you see a mirror
image. (However the image recorded is t he same as a normal recording.)
Only some indications will appear on the screen. When
appears, return the direction of the LCD monitor to normal position and check the warning/alarm indication. (l 134)
28
VQT3J56
Basic
 

Selecting a media to record [HDC-TM90]

The card and built-in memory can be selected separately to record motion pictures or still pictures.
1 Change the mode to or . 2 Select the menu. (l 39)
MENU
: [MEDIA SELECT]
3 Touch the media to record motion pictures or still pictures.
A [VIDEO/SD CARD] B [VIDEO/Built-inMemory] C [PICTURE/SD CARD] D [PICTURE/Built-inMemory]
The media is selected separately to motion pictures or still pictures is highlighted in yellow.
4 Touch [ENTER].
29
VQT3J56
Basic
T
W
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m
A Recording mode B Recording time elapsed
Each time the unit is put into recording pause, the counter display will be reset to 0h00m00s. (“h” is an abbreviation for hour, “m” for minute and “s” for second.)
C Approximate remaining record able
time
(When the remaining time is less than 1 minute, R 0h00m flashes red.)
Screen display will disappear when
no function is performed f or a specific period of time. To display it again, touch the screen. (It is not displayed when the AF/AE trac king is set.)

Recording motion pictures

1 Change the mode to . 2 Open the LCD monitor. 3 Press the recording start/stop
button to start recording.
A When you begin recording, ; changes
to ¥. B Recording button icon Recording can also be started/stopped by touching the Recording button icon. T his icon
functions in the same manner as the recording start/stop button.
4 Press the recording start/stop button again to pause recording.
Screen indications in the Motion Picture Recording Mode
There are 3 recording formats that can be used with this unit: AVCHD that records
high-definition motion pictures, 1080/60p that records motio n pictures in maximum quality for this unit and iFrame that records motion pictures suitable for playback and editing on Mac (iMovie’11). To change the recording format, chang e the Recording Mode (l 60) or press and hold the 1080/60p button. (l 49)
Still pictures can be recor ded while recording the motion pic t ure. (l 33)
30
VQT3J56
Loading...
+ 138 hidden pages