Panasonic FZL1A Users Manual

Model No.
FZ-L1
series
Read Me First
Tablet Computer
Safety Precautions ..................................................................2
Regulatory Information ......................................................... 10
Trademark and License Information....................................... 24
Accessories ........................................................................... 27
• Refer to the Reference Manual by downloading from the URL below URL:- https://pc-dl.panasonic.co.jp/itn/manual/menu_en.html
Thank you for purchasing a Panasonic product.
Before operating this product, please read these instructions and precautions, and save them for future use.
DRAFT
Operating Instructions
Smart Handheld
EB-3901

Safety Precautions

DANGER
WARNING
CAUTION
To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions.

Explanation of symbol word panels

Explanation of symbol word panels
The following symbol word panels are u sed to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.
Denotes potential hazards that will result in serious injury or death.
Denotes potential hazards that could result in serious injury or death.
Denotes potential hazards that could result in minor injury.
The following symbols are used to classify and describe the type of instructions to be observed.
This symbol is used to alert users to specific operating procedures that must not be performed.
This symbol is used to alert users to specific operating procedures that must be followed in order to operate the product safely.
2
Battery
DANGER
The battery is for use solely with this product. Do not use it with any other products.
Electrolyte leakage, overheating, smoke, rupture, or fire may result.
Charge the battery using the specified method.
Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire.
Do not throw the battery into a fire or expose it to excessive heat.
Electrolyte leakage, overheating, smoke, rupture, or fire may result.
Do not disassemble, modify, or insert sharp foreign objects into the battery.
Electrolyte leakage, overheating, smoke, rupture, or fire may result.
Do not short the positive (+) and negative (–) contacts. Do not carry the battery around or store it together with necklaces, hairpins, etc.
Electrolyte leakage, overheating, smoke, rupture, or fire may result.
Keep the battery away from extreme heat, such as fire and direct sunlight.
Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire.
Do not expose the battery to water or other liquids.
Electrolyte leakage, overheating, smoke, rupture, or fire may result.
3Safety Precautions
Do not throw the battery or subject it to strong
WARNING
impact such as dropping or applying high pressure.
Electrolyte leakage, overheating, smoke, rupture, or fire may result.
• Stop using the product if the battery is subjected to strong impact or if the battery is noticeably damaged or deformed.
If the battery deteriorates, replace it with a new one.
Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire.
Do not directly touch electrolyte that has leaked from the battery.
Electrolyte may enter the eyes and cause blindness, or may come into contact with skin or clothing and cause rashes.
• Flush with clean water without rubbing and seek medical advice.
Do not place the battery in microwave ovens or pressurized containers.
Sudden application of heat or pressure may damage the battery, resulting in electrolyte leakage, overheating, smoke, rupture, or a fire.
If the battery smells or leaks electrolyte, keep the battery away from fire.
Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire.
4
This product and charger
WARNING
When using the product for extended periods, do not expose your skin to this product for a prolonged period.
Generated heat can cause low-temp erature burns.
Do not disassemble, repair, or modify the product.
Doing so may cause a short circuit or overheating, which may result in a fire or electric shock.
Do not insert foreign objects into the product.
Doing so may cause a short circuit or overheating, which may result in a fire or electric shock.
Do not allow conductive materials such as metal objects to touch the expansion bus connector.
This may cause a short circuit and overheating, which may result in battery electrolyte leakage, overheating, smoke, rupture, or a fire.
Do not place the product in microwave ovens or electromagnetic cookers.
Doing so may cause overheating, smoke, or rupture, which may result in a fire.
Do not touch the product or charger during lightning storms if the product is connected to a charger.
There is a remote chance of electric shock.
5Safety Precautions
Do not turn the volume up too loud when using headphones, etc.
Listening at high volumes for extended periods may result in loss of hearing. Also, the surrounding sounds will become difficult to hear when the volume is too high, which can cause accidents.
• Turn down the volume before connecting headphones, etc. to prevent sudden loud sounds.
Keep small parts, including SD cards and SIM cards, out of the reach of infants and small children.
Accidental swallowing of small objects can have physically harmful effects. In such a case, seek medical advice immediately.
Do not operate the product while walking, driving, riding a bicycle, etc.
Being distracted while engaging in these kinds of activities can cause accidents or falls.
Use only specified batteries.
Use of unspecified batteries may result in electrolyte leakage, overheating, smoke, rupture, or a fire.
Immediately stop using the product if any of the following occurs.
Product is damagedWater or foreign objects enter the productProduct emits smokeProduct emits unusual smell or soundProduct becomes unusually hot Continuing use may result in a fire or electric shock. Immediately turn the product off, disconnect it from the power supply, remove the battery, and then contact your technical support representative.
6
Close the interface cover when using the product near water or other liquids, and in areas with a high concentration of moisture, steam, dust, oily vapors, etc.
Foreign material that enters the product may cause fire or electric shock. If foreign material enters the product, turn the product off, disconnect it from the power supply, and then remove the battery. Contact your technical support representative for support or repair.
Stop using the product immediately and consult your doctor if you feel any discomfort when staring at flashing lights on the screen.
A very small percentage of individuals may experience seizures or blackouts when exposed to certain light patterns or flashing lights for extended periods.
Do not use the product near electronic devices that are used for high-precision control or weak signals.
• Examples of electronic devices to be aware of: Hearing aids, implantable cardiac pacem akers and implantable cardioverter defibrillators, other medical devices, fire alarms, automatic doors, and other automatic control devices. For those who use implantable cardiac pacemakers, implantable cardioverter defibrillators, or other medical devices, confirm the effects of RF signals with the relevant medical device manufacturer or distributor.
7Safety Precautions
Do not leave the product in areas with a high
CAUTION
concentration of moisture, steam, dust, oily vapors, etc. for extended periods.
Foreign material that enters the product may cause a fire or electric shock.
Do not move the product while the charger is connected.
This may result in a fire or electric shock.
Make sure not to charge the product when it is wet.
This may result in a fire or electric shock.
Do not leave the product in extremely high temperature environments for an extended period.
Leaving the product where it will be exposed to extremely high temperatures, such as near fire or in direct sunlight, may deform the product or cause damage or malfunction to its internal components. Using the product in these conditions may cause short circuit, insulation defects, etc., which may in turn cause a fire or electric shock.
Do not expose the skin to the product when using the product in hot or cold environments.
Burns, low-temperature burns, or frostbite may result. If direct contact with the skin is necessary, perform the operation as quickly as possible.
Do not place the product on an unstable surface.
The product may drop, resulting in an injury.
Do not stack the product.
If balance is lost, the product may fall over or drop, resulting in an injury.
8
Do not look directly at the light emitter of the barcode reader (for models with a barcode reader) or photo light, or point it at another person's eyes.
This may damage the eyes or cause temporary loss of eyesight which could result in an accident.
Do not expose the camera lens to direct sunlight for extended periods.
This may result in a fire, burns, or injury due to the converging effect of the lens.
Use the supplied or specified items.
Use of unsupplied and unspecified items may result in a fire or electric shock.
For safety purposes, pull the plug when cleaning the product or if you will not use it for extended periods.
Failure to do so may result in a fire or electric shock.
If the display is damaged, be careful of broken glass, internal components, or leaked substances that may become exposed.
Failure to do so can cause injury. Also, if substances from internal components come into contact with your skin or clothes, they can cause injury to your eyes and skin. Immediately wash the affected area with clean water without rubbing, and seek medical advice.
Take a 10–15 minute break every hour when using the product.
Using the product continuously for extended periods may cause strain injuries and may have detrimental health effects on your eyes, hands, or other parts of your body.
9Safety Precautions
Loading...
+ 19 hidden pages