Panasonic FT-Z807Y User Manual
7mm
13mm
15mm
Chemical-resistant square-shaped head
with no light-beam misalignment.
FT-Z8Y
SERIES
CHEMICAL-RESISTANT
SQUARE-SHAPED HEAD FIBER
Usable with Various Chemical Liquids
With the case made of PFA and fiber clad with PFA, the fiber can be
used with various types of chemical liquids.
Easy Cutting of Even PFA Protected Fiber
As the diameter of the fiber, including the PFA protected portion, is
only "2.2mm, you can simply cut the fiber to a desired length.
Square-shaped Head Provides Easy Mounting
The square-shaped head offers both easy installation and easy lightbeam alignment.
The head measures 7⳯15⳯13mm, and can be
mounted with M3 screws at two locations.
Thru-beam Type Side-View with 1,500mm Long Sensing Range
The compact side-view type unit realizes a long sensing range of
1,500mm.
Enclosure: PFA
Fiber cladding: PFA
Fiber cutter
"2.2mm
1,500mm
Excellent Explosion-proof Structure Complying with SEMI S2
Since the fiber does not have any electrical circuit in the sensing part,
it offers an excellent explosion-proof structure.
SPECIFICATIONS PRECAUTIONS FOR PROPER USE
DIMENSIONS (Unit: mm)
Item
Applicable amplifier
Sensing range
Sensing object
Allowable bending radius
Fiber cable length (Free-cut)
Protection
Ambient temperature
Ambient humidity
Accessories
FX-D1 series (Note)
1,500mm
"4mm or more opaque object
R25mm or more
Equivalent to IP67 (except for the cut ends of the fiber)
0 toⳭ60⬚C (No dew condensation or icing allowed),
Storange: 0 toⳭ60⬚C
35 to 85%RH, Storage: 35 to 85%RH
Fiber core: Acrylic, Sheath: PFA
Enclosure: PFA
FX-CT1 (Fiber cutter): 1 No.
FT-Z802Y FT-Z805Y FT-Z807Y
2m 5m 7m
2m type 5m type 7m type
• Keep the fiber head surface intact. If it is scratched or
spoiled, the detectability will deteriorate.
• If the fiber head surface is dirty, wipe the off the dirt with a
clean soft cloth moistened with water.
• Do not use the fiber head surface in places where it may
come in direct contact with water. A water drop on the
fiber head surface deteriorates the sensing. No dew or
liquid drop is present on surface of fiber head surface or
sensing object.
• Do not apply excessive tensile force of the fiber cable.
• Bending radius of the fiber cable must be R25mm or more.
If the bending radius is smaller than the specified value,
the sensing performance may deteriorate.
• Ensure that any strong extraneous light is not incident on
the receiving face of the fiber head.
• The fiber cables should be cut off at the ends with the fiber
cutter FX-CT1(accessory) before insertion into the
amplifier. Carefully cut and connect the fiber, as the
sensing performance may deteriorate depending on the
conditions of the cut part and/or of the connection to the
amplifier.
Cautions
(1)
3
(7.3)
2-"3.2
6
13
(5.8)
2,000 (FT-Z805Y: 5,000, FT-Z807Y: 7,000)
15
4 7.5
7
"2.2
M3 screws
(Please arrange separately.)
• Mount using M3 screws. The tightening torque should be
0.3N 䡠 m or less.
Mounting
Beam axis
Fiber cable
Fiber head
This product is not a safety sensor. Its use is not
intended or designed to protect life and prevent body
injury or property damage from dangerous parts of
machinery. It is a normal object detection sensor.
Type
Model No.
Material
Note: For further details, refer to FX-D1 series catalog or sensor general
catalog for FX-D1 series.
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Phone: +81-(0)568-33-7211
FAX: +81-(0)568-33-2631
SUNX Limited
Phone: +81-(0)568-33-7861
FAX: +81-(0)568-33-8591
Overseas Sales Dept.
Printed on 100% recycled paper
PRINTED IN JAPAN
http://www.sunx.co.jp/
All information is subject to change without prior notice.
No.LCE-FTZ8Y-5 March, 2001
Loading...