Panasonic F-GMG01H Operating Instructions Manual

1

GMG01H

Parts identification
Accessories
Safety precautions
Operating requirements

When you

feel confused

Confirmation

Operating

methods

Care and

maintenance

●

●

●

3
3
4

10

……………

……………………

……………

……

…………

………

……

…………

……………

…………………

…………

11

14
14

13
15
16
16

Lo

Hi

8h off

Power Off/On

Timer Off

(Press 2 sec.)

Model No.

Operating Instructions

Nanoe Generator

This product is for use in car or indoor use.

Contents

Further information
Troubleshooting
Specification
Customer’s record

Operating methods

Care and maintenance

・

When idle for a long time

Please read these operating instructions carefully in order to use the
product correctly and in a safe manner.
Also, be sure to read the “Safety precautions” section (Page 4-9)
before use.
Make sure that the correct information is written on the warranty card,
including the date of purchase and the name of the distributor.
Keep the warranty documentation in a safe place along with the
operating instructions for future reference.

Warranty card attached.

Thank you very much for purchasing this Panasonic product.

F-GMG01H

Beautify the human and the air.
The technology of Panasonic.

About

The result is of a 240-minute test in closed space of 10m3, instead of in actual
application space.
The deodorizer effect differs according to the surrounding environment

(temperature / humidity), operation time, type of odor / fiber.

・Please note that products incorporating nanoe™ technology are not to be used for medical treatment.
・The technology has been found to be effective in suppressing a number and variety of harmful airborne and

adhering substances, including viruses bacteria , mould fungi. However, nanoe™ does not create an aseptic

environment, nor does it guarantee prevention of infection.

・Data supplied regarding the effectiveness of nanoe™ have been obtained through experiments under special
conditions using devices which generate electrostatic atomized water, and have not been tested through
commercial products with the devices incorporated in them.
・The actual effects may vary depending upon the specific condition of the room, etc.

The , generated from the most advanced nano-

technology, is a kind of a nano-sized ion particle coated with
water particles.
,which is generated by applying high voltage in order
to split water, has a life about 6 times longer than the air ion,
and its water content (volume proportion) is above 1,000 times more than the latter.
With technology, the effect of sterilization , inhibiting allergic substance ,
inhibiting mold bacteria and deodorization can be achieved.
Furthermore, it creates an atmosphere that is conducive for beautiful, hydrated skin.

<airborne bacteria>※1

※2

※3

※4

<adhered bacteria>

Testing organization : Kitasato Research Center of Environmental Sciences

Test method : Directly expose and measure the bacteria count collected in testing space of 10m3.
Inhibiting method : release nanoe

TM

Target : airborne bacteria
Test outcome : inhibited 99% and above in 240 minutes / [Test number 21_0142]

Testing organization : Kitasato Research Center of Environmental Sciences

Test method : measure the bacteria count soaked in the fabric inside the 1 m

3

test container.

Inhibiting method : release nanoe

TM

Target : bacteria clinging onto the standard fabric.
Test outcome : inhibited 99% and above in 24 hours / [Test number 20_0154_2]

Testing organization : Panasonic Corporation Analysis Center

Test method : directly expose in 45L test container and measure with ELISA method.
Inhibiting method : release nanoe

TM

Target : pollen (Japanese cedar)

Test outcome : inhibit 99% and above in 120 minutes / [E02-080303IN-03]

Testing organization : Panasonic Corporation Analysis Center

Testing method : conduct verification by using 6-phase odor intensity notation in test container of 250L.

Deodorizing method : release nanoe

TM

Target : adhered cigarette odor

Test outcome : odor intensity drops to 1.9 within 30 minutes [E02-090313MH-01]
When odor intensity drops by 1, it means reduction of 90% (Level 1 of odor intensity is such a level that one
can perceive very weak smell)

Test trustee : Japan Food Research Laboratories.
Test method : measure change in bacteria count in test room measuring 6 tatami mats.
Inhibiting method : release nanoe

TM

Target : airborne mold bacteria
Test outcome : inhibit 99% and above in 60 minutes [No. 205061541-001]

and the mark are trademarks of Panasonic Corporation.

Note :

2

Confirmation

Lo

Hi

8hoff

PowerOff/On

TimerOff

(Press2sec.)

Lo

Hi

8hoff

PowerOff/On

TimerOff

(Press2sec.)

Power Off/On button

Parts identification

Front

Louver

Control panel

Air outlet
(
emission outlet)

Body

Back

The plughole used to
connect the unit

Be sure to use the attached AC adapter or Car DC adapter. The attached
adapters are for this product only. Do not use it for other products.

Filter
(air inlet)
(P.14)

Control panel

Air volume indicator

8h Off Timer indicator

Accessories

AC adapter (1 piece)

Plug used to connect the body

Cord

Power plug

Car DC adapter (1 piece)

Cigar plug

Cord

Plug used to connect the body

(P.11-P.12)

Model No. FFJ9140005

Model No. FFJ9140007

3

GMG01H

Safety precautions

These safety precautions are provided for your protection. Please read and follow them
carefully to avoid unnecessary injury and damage to the product itself or other properties.

The following symbols differentiate the levels of danger and injury that may result

if the product is not used specifically as instructed.

This symbol indicates that improper handling
may cause a risk of death or serious injury.

This symbol indicates that improper handling may
cause a risk of injury or damage to the product or
to your properties.

WARNING

CAUTION

This manual uses a number of other symbols to indicate additional information for
a particular item. (The symbols given below are examples.)

This symbol indicates an
action that must be
performed.

This symbol indicates an
action that must not be
performed.

Do not pull on the
adapter cord when
carrying or storing
away the unit.

(It may cause a short-circuit
or damage the wires inside

the cord, and fire or electric

shocks may occur.)

Do not pull on the
adapter cord when
disconnecting the
adapter.

(It may cause worn-out
electric shock, short-circuit

or fire.)

(When the rating is
exceeded due to the multi­legged wiring, it may cause

overheat and result in fire.)

WARNING

Do not use overloaded
wall socket or wiring
equipment, and do not
use a power supply
other than 220V 50Hz AC.

Do not plug or unplug
the adapter plug with
wet hands.

(Electric shock may occur.)

Confirmation

Safety precautions

Adapter cord must not be

damaged, modified, bended

excessively or pulled.
Also do not place heavy objects on it.

(Electric shock or fire may occur.)

Consult with distributors to carry
out any repairs to the cord and plug.

If the adapter cord is damaged,
it must be replaced by the
manufacturer, its service agent

or similarly qualified persons in

order to avoid a hazard.

WARNING

Do not do anything that
may damage the adapter
cord or adapter plug.

(These detergents can give

off harmful gas.)

Do not clean the product
with acid detergents or
detergents that contain
chlorine.

(The contact with the inside
of the unit may cause an electric
shock or injury.)

(It may cause fire, electric
shock or error.)

Do not insert your
fingers or metal objects
into the air inlet, air outlet
or any other gaps.

Do not allow drinking
water, cigarette ash,
inflammable substances,
etc. to enter the inside
of the unit through the
air inlet and air outlet.

When inserting the plug,
make sure the AC adapter
from the power outlet
pass in the end portion,
or a car's cigarette lighter
DC adapter cigarette
lighter socket hit the
bottom, to ensure that
they can be securely
inserted.

Do not disassemble,
repair or modify the
product.

(It may cause ignition or
unexpected start, resulting

in fire or electric shock.)

Ask the place of purchase
for any repairs.

(An incomplete connection may
cause an electric shock or

overheat, which results in fire.)

Do not use a damaged
adapter, a loose socket or a
loose cigar lighter socket.

4

Confirmation

Safety precautions

Adapter cord must not be

damaged, modified, bended

excessively or pulled.
Also do not place heavy objects on it.

(Electric shock or fire may occur.)

Consult with distributors to carry
out any repairs to the cord and plug.

If the adapter cord is damaged,
it must be replaced by the
manufacturer, its service agent

or similarly qualified persons in

order to avoid a hazard.

WARNING

Do not do anything that
may damage the adapter
cord or adapter plug.

(These detergents can give

off harmful gas.)

Do not clean the product
with acid detergents or
detergents that contain
chlorine.

(The contact with the inside
of the unit may cause an electric
shock or injury.)

(It may cause fire, electric
shock or error.)

Do not insert your
fingers or metal objects
into the air inlet, air outlet
or any other gaps.

Do not allow drinking
water, cigarette ash,
inflammable substances,
etc. to enter the inside
of the unit through the
air inlet and air outlet.

When inserting the plug,
make sure the AC adapter
from the power outlet
pass in the end portion,
or a car's cigarette lighter
DC adapter cigarette
lighter socket hit the
bottom, to ensure that
they can be securely
inserted.

Do not disassemble,
repair or modify the
product.

(It may cause ignition or
unexpected start, resulting

in fire or electric shock.)

Ask the place of purchase
for any repairs.

(An incomplete connection may
cause an electric shock or

overheat, which results in fire.)

Do not use a damaged
adapter, a loose socket or a
loose cigar lighter socket.

5

GMG01H

Safety precautions

WARNING

Be sure to use the
attached AC adapter
and Car DC adapter.

Be sure to disconnect
the power supply before
cleaning the unit.

(The unit may start operating
unexpectedly otherwise it may

cause electric shock.)

Be sure to clean the
dust of the adapter
regularly.

Do not use the product
in a car other than 12V.

Always observe the following precautions when using the product inside a car.

Do not soak the unit in
water, or let the product
get wet.

When errors occur,
please disconnect the
power plug of the AC
adapter or the cigar
plug of the car DC
adapter.

(When the dust accumulates,
it may cause poor insulation
due to factors such as

moisture, resulting in a fire.)

This product is specially
used for the DC 12V cathode
earth car. Do not use it in large

-scale trucks, buses, etc. which
uses a 24V battery. (Otherwise
it may cause fire or error.)

Do not install the unit
in the places where
vision or driving is
obstructed, or it may
bring danger for the
fellow passengers.

(It may cause a traffic

accident or injury.)

(It may cause fire or

electric shock due to short
circuit.)

When the inside is mixed
with metal, liquid such as
water, or foreign material.
When smoke, unpleasant
odor or noise comes out,
or dropping or damage
occurs. (It may cause a

fire.)

Disconnect the adapter
and wipe with dry cloth.
Disconnect the adapter
when the product is idle
for a long time.

(Otherwise it may cause an

electric shock or fire.)

Confirmation

Safety precautions

Do not operate this
product during driving.

Make sure that the
wiring of the cord of
the car DC adapter
does not disturb the
driver.

Always observe the following precautions when using the product inside a car.

(The driving is misled and an
unexpected traffic accident
may occur.)

WARNING

Do not touch or nip the
movable parts such as
steering wheel, brake
pedal, seat rail, gear shift,
etc.
Please consider the
forward and backward
moving, rotation of the
seats, and the trend of
reclining before conducting
the wiring.

(It may cause a traffic accident.)

After the wiring of the
cord, please confirm
if the electric
components of the car
work.

(It may cause fire, electric
shock or traffic accident due

to malfunction.)

Brake, light, horn, hazard,
winker, etc.

When the product is idle
for a long time, be sure
to disconnect the plug
from the socket or the
cigar lighter socket.

(It may cause insulation aging,
resulting in an electric shock
or fire because of electricity
leakage.)

6

Confirmation

Safety precautions

Do not operate this
product during driving.

Make sure that the
wiring of the cord of
the car DC adapter
does not disturb the
driver.

Always observe the following precautions when using the product inside a car.

(The driving is misled and an
unexpected traffic accident
may occur.)

WARNING

Do not touch or nip the
movable parts such as
steering wheel, brake
pedal, seat rail, gear shift,
etc.
Please consider the
forward and backward
moving, rotation of the
seats, and the trend of
reclining before conducting
the wiring.

(It may cause a traffic accident.)

After the wiring of the
cord, please confirm
if the electric
components of the car
work.

(It may cause fire, electric
shock or traffic accident due

to malfunction.)

Brake, light, horn, hazard,
winker, etc.

When the product is idle
for a long time, be sure
to disconnect the plug
from the socket or the
cigar lighter socket.

(It may cause insulation aging,
resulting in an electric shock
or fire because of electricity
leakage.)

7

GMG01H

Safety precautions

(It may cause low­temperature burning.)

About the low-temperature
burning: Even if the
temperature of a substance
is a little higher than that of
the body of the human
beings, low-temperature
burning may still occur if
the same part of the skin
touches the substance
directly for a long time.

Where safety is not
guaranteed. (Causes of
falling over and injury)
Where temperature or
humidity is too high, or
water is present, such as
a bathroom. (The unit
may leak current and

electric shock or fire may

occur.)
Places where oil content
is airborne, such as in
kitchens.
(Otherwise, injury may be
caused due to cracks.)

Where oil or inflammable

gas is present and may be

leaked.(Otherwise, fire or

smoke may be caused
due to ignition in the unit.)

Do not directly touch
the powered-on adapter.

(The unit may become
cracked and injury may
occur, or the unit may
short-circuit and cause

electric shock or fire.)

Do not clean the unit
with solvents such as
oil, alcohol, benzene
or thinner, and avoid
contact with insect
sprays.

(It may cause injury or error.)

When carrying the
unit, please avoid
dropping or applying
a shock over the unit.

(It may cause injury or
damage the unit.)

Do not carry or move
the unit by holding the
louver.

(Otherwise, injuries may be
caused or the unit may be
damaged.)

Do not step or sit on
the unit.

(It may cause fire due to

ignition.)

Do not get close to the
inflammable substances
or the lit cigarette or
incense.

Do not put the unit in
the following places:

CAUTION

8

Confirmation

Safety precautions

Do not touch the metal
part of the cigar plug
(cigar lighter socket) of
the car DC adapter.

Always observe the following precautions when using the product inside a car.

(It may cause a burn.)

After the operation stops,
the temperature of the
metal part of the cigar
plug is so high that it
may cause a burn.

Do not put the unit in
the unstable places
such as the cup holder
sold in the market, the
swaying table, the
leaning places, etc.

(It may cause the unit to drop
or turn over, resulting in injury.)

Do not put the unit in
the cup holder where
the unit may jump out
or fall off.

(It may cause injury or
errors.)

Do not put the unit in
the cup holder where
the cord is excessively
bended or pressed.

(It may cause the damage
of the cord, electric shock

or fire.)

CAUTION

(Otherwise, injuries may be
caused or the unit may be
damaged.)

Do not use the product
within the reach of
children.

This unit is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experiences and knowledge,
unless they have been given supervision or instruction concerning use of the unit
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the unit.
The unit is only to be used with the power supply unit provided with the unit.
The unit must only be supplied at safety extra low voltage corresponding to the
marking on the unit.

9

GMG01H

Where it is exposed to the direct sunlight (it may cause change in color or shape,
or cause an error.)

The nearby of the electric key of the car (It may interfere the electric wave of the
unit, causing it to fail to identify the electric key, or an alarm may sound, or the
alarm indicator lights up.)

Please keep a distance of 30 cm or above.

Please keep away from the glass antenna of the car. Otherwise it may cause noise
for the radio.

(It may cause change in color and shape, or an error.)

If the unit has been used for a long time:

The surrounding of the air inlet and air outlet is easy to get dirty.
Therefore, it is necessary to carry out care and maintenance regularly. (P.14)

Do not place inside the car for a long time.

Operating requirements

Do not put the unit in the following places:

The nearby of the curtain (It may cause the air inlet and air outlet to be blocked,
resulting in an error.)

The nearby of the television or radio (It may cause image chaos or noise.)

If the power plug of the AC adapter is connected to the same socket with these
electric appliances, it may cause image chaos or noise.
In this case, please connect the adapter plug in other sockets.

10