Panasonic ET-YFB200G Datasheet

PEC

ILE

Product Number :

Product Name :

ET-YFB200G

Digital LINK Switcher

As of May 2015. Specifications and appearance are subject to change without notice.

SFD15A018

1/8

Digital LINK Switcher

ET-YFB200G

Description

This DIGITAL LINK switcher is designed for use with Panasonic video display devices. Two output lines of video, audio and control signals (LAN/serial) can be transmitted over distances of up to 150 meters (in long reach mode)* using only a LAN cable (CAT5e or greater STP cable). It can also handle an additional DVI-D output line. In addition to video and RGB signals, HDMI signals can be input. Switching is done using the projector’s wireless remote control or the control buttons of the DIGITAL LINK switcher.

* Video signals that can be transmitted are those with a resolution of 1080/60p (dot clock 148.5 MHz) or lower.

Specications

Power supply Power consumption

AC adaptor Input

Output

Scanning frequency

Input HDMI

RGB

BPR

Video/S-Video

(YCBCR)

16 V DC (DC input connector) 32 W (0.15 W with the power off, including the power consumption of AC adaptor) 100–240 V AC, 1,5–0.8 A, 50/60 Hz 16 V DC, 3.75 A

480i (525i): f 576i (625i): fH 15.63 kHz; 480p (525p): f 576p (625p): f 720 (750)/60p: fH 45.00 kHz; 720 (750)/50p: fH 37.50 kHz; 1080 (1125)/60i: fH 33.75 kHz; 1080 (1125)/50i: f 1080 (1125)/60p: fH 67.50 kHz; 1080 (1125)/50p: f 1080 (1125)/24p: f 1080 (1125)/24sF: f 1080 (1125)/25p: fH 28.13 kHz; 1080 (1125)/30p: f

H: 15.6 – 98.8 kHz, fV: 24.0–120.0 Hz

H 15.73 kHz;

H 31.47 kHz; H 31.25 kHz;

H 28.13 kHz;

H 56.25 kHz; H 27.00 kHz; H 27.00 kHz;

H 33.75 kHz;

V 59.94 Hz*,

f fV 50 Hz*, f

V 59.94 Hz, V 50 Hz,

f fV 60 Hz, fV 50 Hz, fV 60 Hz, f

V 50 Hz

fV 60 Hz fV 50 Hz,

V 24 Hz,

V 48 Hz**,

f fV 25 Hz

V 30 Hz,

Dot clock frequency: 25.2 MHz to 162.0 MHz Displayable resolution: VESA400 (640 x 400) to WUXGA*** (1 920 x 1 200), * Pixel-Repetition signal (dot clock frequency 27.0 MHz) only ** Does not support the frame lock. *** VESA CVT-RB (Reduced Blanking) compliant

H: 15.6 – 98.8 kHz, fV: 24.0–120.0 Hz

f Dot clock frequency: 25.2 MHz to 162.0 MHz Displayable resolution: VESA400 (640 x 400) to WUXGA* (1 920 x 1 200), * VESA CVT-RB (Reduced Blanking) compliant 480i (525i): f 576i (625i): f 480p (525p): f 576p (625p): f

H 15.73 kHz; H 15.63 kHz; H 31.47 kHz; H 31.25 kHz;

720 (750)/60p: fH 45.00 kHz; 720 (750)/50p: fH 37.50 kHz; 1080 (1125)/60i: fH 33.75 kHz; 1080 (1125)/50i: f

H 28.13 kHz;

1080 (1125)/60p: fH 67.50 kHz; 1080 (1125)/50p: f 1080 (1125)/24p: f 1080 (1125)/24sF: f

H 56.25 kHz; H 27.00 kHz; H 27.00 kHz;

1080 (1125)/25p: fH 28.13 kHz; 1080

(1125)/30p: f

H 33.75 kHz;

V 59.94 Hz,

V 50 Hz,

V 59.94 Hz,

V 50 Hz,

f fV 60 Hz, fV 50 Hz, fV 60 Hz, f

V 50 Hz

fV 60 Hz f

V 50 Hz, V 24 Hz,

V 48 Hz*,

f fV 25 Hz

V 30 Hz,

* Does not support the frame lock.

H: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]

f fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]

As of May 2015 2/8

SFD15A018

Digital LINK Switcher

ET-YFB200G

OutputScanning frequency

Terminals HDMI IN

COMPUTER (RGB) IN

R, G, B

Y, P

VIDEO IN DVI-D OUT AUDIO IN AUDIO OUT SERIAL IN REMOTE IN LAN

DIGITAL LINK Dimensions (W ×H×D) Weight Main unit

AC adaptor Operating temperature Operating humidity Applicable display

B(CB

), PR(CR)

WUXGA60-CVT-RB(1920 x 1200): 1080/60p(1920 x 1080): SXGA+60(1400 x 1050): 1366 x 768/60(1366 x 768): 1280 x 800/60(1280 x 800): XGA60(1024 x 768): 720/60p(1280 x 720): 1080/24p(1920 x 1080): 1080/30p(1920 x 1080): 1080/50p(1920 x 1080): 720/50p(1280 x 720): 1080/25p(1920 x 1080):

H 74.04 kHz;

f fH 67.50 kHz; f

65.22 kHz;

H 47.71 kHz;

f fH 49.70 kHz; fH 48.36 kHz; fH 45.0 kHz; f

H 27.0 kHz;

33.8 kHz;

f f

56.3 kHz;

37.5 kHz;

f f

H 28.1 kHz;

V 59.95 Hz*,

f fV 60 Hz, f

60 Hz,

V 59.79 Hz,

f fV 59.81 Hz, fV 60 Hz, fV 60 Hz, f

V 24 Hz

30 Hz

f f

50 Hz,

V 25 Hz,

f Dot clock frequency: 65.0 MHz to 154.0 MHz * When the display (projector or at panel display) connected with the DIGITAL LINK is supporting the long reach communication method, it is not supporting the output. The supported output signal for the <DIGITAL LINK OUT 1> terminal/ <DIGITAL LINK OUT 2> terminal is same as the <DVI-D OUT> terminal. However, output of 3D signal is supported only by the <DIGITAL LINK OUT 1> terminal/<DIGITAL LINK OUT 2> terminal, and it is not supported by the <DVI-D OUT> terminal.

HDMI 19-pin × 2, Deep Color, HDCP compatible

audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) D-sub HD 15-pin (female) × 2 G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative)

NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

Y: 1.0 Vp-p (including sync signal); P

B (C

), PR(CR): 0.7 Vp-p, 75 ohms

C: 0.286 V [p-p] 75 Ω

Only the <COMPUTER 1 IN> terminal can input Y/C signal using the optional

D-SUB - S Video conversion cable (Model No.: ET-ADSV).

PIN jack ×1, 1.0 Vp-p, 75 ohms DVI-D 24-pin ×1 M3 (L, R) stereo mini jack × 3, 0.5 Vrms, 22 kΩ M3 (L, R) stereo mini jack × 1 (monitor out: 0 –2.0 Vrms, variable), 2.2 kΩ 3-pin 3.5 mm detachable terminal for external control (RS-232C compliant) D-sub 9-pin (female) × 1 for external control (parallel) RJ-45 × 1, for network connection, 100Base-TX/10Base-T RJ-45 × 2, for DIGITAL LINK connection 210 × 44 × 250*

mm (8-9/32 × 1-23/32 × 9-27/32*1inches) Approx. 1.3 kg (2.9 lbs) Approx. 0.2 kg (0.4 lbs) 0–40 °C (32–104 °F)*

20%–80% (no condensation) DIGITAL LINK compatible projector, at panel display

Supplied accessories

AC adaptor (× 1) AC adaptor securing bracket (× 1) Power cord (2 m) (× 3) Foot (× 4) Screws for attaching feet (× 4) Rack mounting bracket (× 2) Screws for attaching the rack mounting brackets (× 6) Plug for 3-pin 3.5 mm detachable terminal block (× 1)

Weights and dimensions shown are approximate. Specications subject to change without notice.

1Protruding parts not included.

2 When using the device at elevations between 1 400 m (4 593') and 2 700 m (8 858') above sea level, the operating environment temperature

should be between 0 °C (32 °F) and 35 °C (95 °F). The device cannot be used at elevations of 2 700 m (8 858') or higher above sea level.

As of May 2015 3/8

SFD15A018

+ 5 hidden pages