Panasonic ET-PKR100P User Manual
S P E C F I L E
Portrait mode mount bracket
ET-PKR100P
Description
This ceiling mount bracket is to be used when mounting projectors to ceilings for portrait mode.
Specifications |
|
Vertical correction angle: |
±3° |
Horizontal slant correction angle: |
±5° |
Horizontal turn correction angle: |
±1.2° |
Dimensions (W × H × D): |
344 × 1054 –1534 × 303 mm (13-17/32 × 41-1/2 – 60-13/32 × 11-15/16 inches) |
Weight: |
13.5 kg* (29.8 lbs)* |
Applicable projectors: |
PT-RZ470K/RZ470W/RW430K/RW430W |
|
* Average value. May differ depending on the actual unit. |
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Parts |
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . |
1 |
|
Projector mount bracket . . . . . . . . . . . . . . . . . . . |
1 |
|
Adjustment pole 1 . . . . . . . . . . . . . . . . . . . . . . . |
1 |
|
Adjustment pole 2 . . . . . . . . . . . . . . . . . . . . . . . |
1 |
|
Angle adjusting bracket . . . . . . . . . . . . . . . . . . . |
1 |
|
Pole brace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
1 |
|
Pole base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
1 |
Washer-fitted hexagonal bolts (M6 × 80) |
. . . . . . 4 |
Washer-fitted screws (M4 × 10) . . . . . . . . . |
. . . . . 4 |
Washer-fitted hexagonal bolts (M6 × 16) |
. . . . . 24 |
Washer (M6) . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . 4 |
Hexagonal nuts (M6) . . . . . . . . . . . . . . . . . |
. . . . . 4 |
Ceiling mount bracket drop prevention kit |
. . . . . 1 |
Projector drop prevention kit . . . . . . . . . . |
. . . . . 1 |
C a u t i o n :
•Mounting should be done by a qualified technician.
•Make sure that the mounting (ceiling) area has sufficient strength.
•Read the enclosed installation instructions thoroughly before starting.
•Do not use an electric screwdriver or impact driver to tighten screws. (Use a torque driver or similar tool.)
•When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
Illustration shows the bracket attached to a projector.
Attachment plate
|
|
60.5 |
–1429*949 |
1/4)*-56–3/8-(37 |
|
|
|
|
|
|
|
( 2-3/8) |
|
|
|
|
|||
|
|
|
|
|
55
( 2-5/32)
*Adjustable in
60 mm (2-3/8 in) steps
213 |
|
|
202 |
Projector |
(8-3/8) |
|
|
(7-15/16) |
|
|
|
|
131.5 |
(5-3/16) |
100 |
(3-15/16) |
344 (13-17/32) |
100
(3-15/16) Attachment plate 300
(11-13/16)
Attachment plate
12 ( 15/32)
200 (7-7/8) |
344 (13-17/32) |
2-3-R6
(2-3-R1/4)
200 (7-7/8)
300 (11-13/16)
unit : mm (inch) NOTE: This illustration is not drawn to scale.
As of December 2012 |
|
1 / 1 |
SFD12A016
Loading...