Panasonic ETPKE200H User Manual

S P E C F I L E
54
4-54
(2-1/8)
*
2
951– 1,551
(37-7/16 –6 1-1/16 )
184. 5
(7-1/4)
185. 5
(7-5/16)
489.5
(19-9/ 32)
60
(2-3/8)
60 (2-3/8)
120
(4-23/32)
60
(2-3/8 )
60
(2-3/8)
120
(4-23/32)
Projector
4-10
× 14
(13/32
× 9/16)
Adjustable in
30 mm (1-3/16) steps
Ceiling mount bracket for high ceiling s
ET-PKE200H
Description
This ceiling mount bracket is used when mounting a Panasonic’s applicable pro jec tor to hig h ce ili ngs .
OTE : This c eili ng moun t brac ket can not be use d by itse lf. Com bine i t with t he opti onal b rack et asse mbly.
N
Specifications
Vertical correction angle: +10°, -40° Horizontal slant correction angle: ±15° Horizontal turn correction angle: ±10° Dimensions (W × H × D): 264 × 864–1,464 × 264 mm
(10-13/32 × 34-1/32–57-5/8 × 10-13/32 inches) Weight: Approx. 5.2 kg* (11.5 lbs*) Applicable bracket assembly: ET-PKE200B
Ave rage v alue . May dif fer dep endi ng on mode ls.
*
Parts
Projector mount bracket A (pole included) . . . . . 1
Projector mount bracket B (pole included) . . . . . 1
Pole joint bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer (M6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hexagonal nut (M6) . . . . . . . . . . . . . . . . . . . . . . 1
Snap pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screws (M3 × 10) . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
C a u t i o n :
• Mounting should be done by a qualified technic ian.
• Make sure tha t the mounti ng (ceilin g) area has sufficient strengt h.
• Read the enclosed mounting instructio ns thoroughly befo re star ting.
• Do not use an elec tric screwdrive r or impact driver t o tighten sc rews. Use a torque driv er or hexa gon torque wre nch and tigh ten screws to th e torque specifi ed in the instructio ns.
• When the prod uct is no lo nger going to be us ed, have it dispose d of quickly by a profession al disposa l service.
Dimensions
The illustration shows the ceiling mount bracket when it is combined with the ET-PKE200B and the PT-EZ570/EZ570L/EW630/EW630L/EX600/EX600L/ EW530/EW530L/EX500/EX500L is attached.
As of April 2012
SFL12A00 9
NOT E: This i llus trat ion is not d rawn t o scal e.
uni t : mm (inch )
1 / 1
Loading...