Panasonic ETPKD130H Specifications

High-ceiling mount bracket (6-axis adjustment mechanism)

Description

This bracket is a special mount bracket with a 6-axis adjustment mechanism which is useful for installing the ET-DLE030 to applicable
Panasonic projectors to enable short focal-length projection.

NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.

Specifications

Vertical correction angle: ±5°
Horizontal slant correction angle: ±5°
Horizontal turn correction angle: ±5°
Horizontal slide amount ±50 mm
Forward-back slide amount ±50 mm
Vertical slide amount ±50 mm
Dimensions (W × H × D): 380 × 329– 489 × 308 mm (14-31/32 × 12-15/16–19-1/8 × 12-1/8 inches)
Weight: 10 kg*
Applicable bracket assembly: ET-PKD130B/PKD120B
Applicable projectors [Group A]
PT-DZ870K/DZ870W/DZ870LK/DZ870LW/
DW830K/DW830W/DW830LK/DW830LW/DX100K/DX100W/DX100LK/DX100LW
[Group B]
PT-DZ770S/DZ770K/DZ770LS/DZ770LK/
DW740S/DW740K/DW740LS/DW740LK/DX810S/DX810K/DX810LS/DX810LK/
DZ680S/DZ680K/DZ680LS/DZ680LK/
DW640S/DW640K/DW640LS/DW640LK/DX610S/DX610K/DX610LS/DX610LK/
DZ6710/DZ6710L/
DW730S/DW730K/DW730LS/DW730LK/DX800S/DX800K/DX800LS/DX800LK/
DZ6700/DZ6700L/DW6300S/DW6300K/DW6300LS/DW6300LK/
D6000S/D6000K/D6000LS/D6000LK/D5000S/D5000LS

Weights and dimensions shown are approximate. Specifications and appearance are subject to c hange without notice.

ET-PKD130H

* Average value. May differ depending on models.

Parts

Caution:

• Mounting should be done by a qualified technician.

• Make sure that the mounting (ceiling) area has sufficient strength.

•Read the enclosed mounting instructions thoroughly before starting.

• Do not use an e lectric screwdriver or impact driver to tighten screws. (Use a torque driver or similar tool.)

• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.

Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Adjustment pole unit . . . . . . . . . . . . . . . . . . . . . . . . . 1

Angle adjustment unit . . . . . . . . . . . . . . . . . . . . . . . . 1

Pole support bracket 1. . . . . . . . . . . . . . . . . . . . . . . 1

Pole support bracket 2. . . . . . . . . . . . . . . . . . . . . . . 1

Adjustment knob bracket . . . . . . . . . . . . . . . . . . . . . 1

Washer-fitted hexagonal bolts (M6 × 80) . . . . . . . . . 2

Washer-fitted bolts (M6 × 16) . . . . . . . . . . . . . . . . . . 26

Hexagonal head bolt (M8×130) . . . . . . . . . . . . . . . . . 2

Plain washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Hexagonal nuts (M6) . . . . . . . . . . . . . . . . . . . . . . . . 2

As of September 2013

SFL13A002

1/2

High-ceiling mount bracket (6-axis adjustment mechanism)

Dimensions

ET-PKD130H

<Diagram showing installation together with the
ET-PKD130B/PKD120B to a Group A projector>

Attachment
plate

274

(10-25/32)

Φ60.5

(Φ2-3/8)

239

(9-13/32)

546~706*

*

Continuous height
adjustment possible

Projector

(21-1/2~27-25/32*)

<Diagram showing installation together with the
ET-PKD130B/PKD120B to a Group B projector>

Attachment
plate

276

(10-7/8)

䃥60.5

(Φ2-3/8)

147

(5-25/32)

*Continuous height

adjustment possible

Projector

*

665.5

~

505.5

(19-29/32~26-3/16*)

100

(3-15/16)

308

(12-1/8)

100

(3-15/16)

Attachment plate

2-3-R6
(2-3-R1/4)

Attachment
plate

200

(7-7/8)

100

(3-15/16)

100

(3-15/16)

380

(14-31/32)

380

(14-31/32)

100

(3-15/16)

(12-1/8)

(3-15/16)

308

100

Attachment
plate

100

(3-15/16)

100

(3-15/16)

380

(14-31/32)

(7-7/8)

(12-1/8)

As of September 2013

SFL13A002

200

308

Φ12
(15/32)

54

(2-1/8)

90

(3-17/32)

NOTE: This illustration is not drawn to scale.

unit : mm (inch)

2/2