Panasonic EP1015PA, EP1015PA1 User Manual [en, fr]

Household Massage Lounger
Fauteuil vibromasseur
Silla de masaje para el hogar
Model No. EP1015 Modèle No. EP1015 Modelo No. EP1015
Operating Instructions
Instrucciones
de funcionamiento
Before operating this unit, please read these instructions completely and save this manual for future use.
Avant d’utiliser cet appareil, veuillez lire comlpètement ces instructions et conserver ce manuel à titre de référence.
Antes de utilizar esta unidad, lea completamente estas instrucciones y guarde este manual para
utilizarlo en el futuro en caso de ser necesario.
®
2

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . 3
SAFETY PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . 4
OPERATING PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . 5
GROUNDING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . 6
HOW TO MOVE THE CHAIR. . . . . . . . . . . . . . . . . . . . . . . 6
PARTS IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . 7
BEFORE USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
• PLACE OF USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
• TURNING ON THE POWER. . . . . . . . . . . . . . . . . . . . . . 8
• BEFORE SITTING DOWN. . . . . . . . . . . . . . . . . . . . . . . . 8
• RECLINING THE CHAIR. . . . . . . . . . . . . . . . . . . . . . . . . 9
• HOW TO EXTEND THE LEGREST MANUALLY . . . . . . 9
HOW TO USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
• TO START/STOP MASSAGE ACTION. . . . . . . . . . . . . 10
• LEG MASSAGER OPERATION . . . . . . . . . . . . . . . . . . 10
• PROGRAMMED MASSAGE . . . . . . . . . . . . . . . . . . . . . 11
• MANUAL MASSAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
• BACK CUSHION AND HEADREST . . . . . . . . . . . . . . . 15
• CUSHION INSERT PAD . . . . . . . . . . . . . . . . . . . . . . . . 15
• DETAILS OF PROGRAMMED MASSAGE . . . . . . . . . . 16
• MASSAGE HEADS’ RANGE OF MOVEMENT. . . . . . . 17
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . . . 18
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
TABLE DES MATIÈRES
REMARQUES IMPORTANTES CONCERNANT
LA SECURITE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
CONSIGNES DE SÉCURITE. . . . . . . . . . . . . . . . . . . . . . 21
PRÉCAUTIONS À SUIVRE . . . . . . . . . . . . . . . . . . . . . . . 22
INSTRUCTIONS POUR LA MISE À LA TERRE . . . . . . . 23
DÉPLACEMENT DU FAUTEUIL . . . . . . . . . . . . . . . . . . . 23
IDENTIFICATION DES ELEMENTS . . . . . . . . . . . . . . . . 24
AVANT L’UTILISATION . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• EMPLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• MISE SOUS TENSION . . . . . . . . . . . . . . . . . . . . . . . . . 25
• AVANT DE S’ASSEOIR. . . . . . . . . . . . . . . . . . . . . . . . . 25
• INCLINAISON DU FAUTEUIL . . . . . . . . . . . . . . . . . . . . 26
• EXTENSION DE L’APPUIE-JAMBES
MANUELLEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
UTILISATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
• POUR LANCER/ARRÊTER LE MASSAGE . . . . . . . . . 27
• MASSAGE DES JAMBES . . . . . . . . . . . . . . . . . . . . . . . 27
• MASSAGE PROGRAMMÉ . . . . . . . . . . . . . . . . . . . . . . 28
• MASSAGE MANUEL . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
• COUSSIN DU DOSSIER ET APPUIE-TETE. . . . . . . . . 32
• GARNITURE D’INSERTION DU COUSSIN . . . . . . . . . 32
• DETAILS D’UN MASSAGE PROGRAMME. . . . . . . . . . 33
PLAGE D’EVOLUTION DES TETES DE MASSAGE
. . . 34
GUIDE DE DEPANNAGE. . . . . . . . . . . . . . . . . . . . . . . . . 35
CARACTÉRISTIQUES TECHNIQUES. . . . . . . . . . . . . . . 36
ÍNDICE
INSTRUCCIONES DE SEGURIDAD IMPORTANTES. . . 37
PRECAUCIONES DE SEGURIDAD. . . . . . . . . . . . . . . . . 38
PRECAUCIONES PARA LA OPERACIÓN . . . . . . . . . . . 39
INSTRUCCIONES PARA LA CONEXIÓN A TIERRA . . . 40
CÓMO MOVER LA SILLA . . . . . . . . . . . . . . . . . . . . . . . . 40
IDENTIFICACIÓN DE PARTES . . . . . . . . . . . . . . . . . . . . 41
ANTES DE UTILIZAR LA SILLA DE MASAJE. . . . . . . . . 42
• LUGAR DE UTILIZACIÓN . . . . . . . . . . . . . . . . . . . . . . . 42
• CONEXIÓN DE LA ALIMENTACIÓN . . . . . . . . . . . . . . 42
• ANTES DE SENTARSE . . . . . . . . . . . . . . . . . . . . . . . . 42
• RECLINACIÓN DE LA SILLA . . . . . . . . . . . . . . . . . . . . 43
• CÓMO EXTENDER MANUALMENTE EL APOYO
PARA LAS PIERNAS . . . . . . . . . . . . . . . . . . . . . . . . . 43
UTILIZACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
• PARA INICIAR/DETENER LA ACCIÓN DE MASAJE. . 44
• OPERACIÓN DEL MASAJEADOR DE LAS PIERNAS. 44
• MASAJE PROGRAMADO . . . . . . . . . . . . . . . . . . . . . . . 45
• MASAJE MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
• COJÍN DEL RESPALDO Y APOYO PARA
LA CABEZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
• COJÍN DE ESPUMA . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
• DETALLES DEL MASAJE PROGRAMADO . . . . . . . . . 50
• ALCANCE DE MOVIMIENTO DE LAS CABEZAS
DE MASAJE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
GUÍA PARA LA LOCALIZACIÓN Y SOLUCIÓN DE
PROBLEMAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
ESPECIFICACIONES. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
– Customer’s Record – Please record both the model and serial numbers of this product in the spaces provided. Retain this book, along with a copy of your purchase receipt, for future reference. The serial number can be found just above the power switch at the rear of the chair.
– Mémo pour le client – Veuillez noter les numéros de modèle et de série de cet équipement dans les espaces réservés à cet effet. Conservez la présente notice avec une copie de votre reçu d’achat en cas de références ultérieures.
– Anotación del cliente – Anote los números de modelo y serie de este producto en los espacios suministrados. Guarde este manual junto con una copia de su recibo de compra para utilizarlos como referencia en el futuro.
Model Number Numéro de modèle Número de modelo _______________________________
Serial Number Numéro de série Número de serie _________________________________
Dealer’s Name Nom du revendeur Nombre del concesionario _________________________
Date Purchased Date de l’achat Fecha de adquisición _____________________________
3
Thank you for purchasing the Panasonic Household Massage Lounger EP1015. For optimum performance and safety, please read these instructions carefully.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using the massage lounger.
DANGER – To reduce the risk of electric shock:
Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
WARNING – To reduce the risk of burns, fire, electric shock or injury to persons:
1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use.
2. Close and continuous supervision is necessary when this appliance is used by invalids or disabled persons.
3. Use this appliance only for its intended use as described in this manual.
4. Do not stand on or in the appliance. Use only while seated.
5. Do not use accessories not recommended by the manufacturer.
6. This appliance should not be used by children. Keep children away from massage lounger. To avoid possible injury always return chair to an upright position and retract the legrest carefully. Make sure nothing can be caught in the legrest mechanism.
7. Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged. Call your nearest authorized service center for repair.
8. Keep the cords away from heated surfaces.
9. Never drop or insert any object into any opening.
10.Do not use outdoors.
11. Do not operate where aerosol spray products are being used or where oxygen is being administered.
12.T o disconnect, turn all controls to the “off” position, then remove plug from outlet.
13.Connect this appliance to a properly grounded outlet only. See Grounding Instructions.
14.T o avoid the risk of electric shock or personal injury, do not attempt to open or disassemble any part of this massage lounger. Never insert hands in areas where there are moving parts. There are no user-serviceable parts.
SAVE THESE INSTRUCTIONS
4

SAFETY PRECAUTIONS

WARNING: To avoid risk of injury
1. This product should not be used by pregnant women, persons who are ill, or persons with back, neck, shoulder or hip pain, or conditions of any kind, without consulting a physician prior to use. Do not use on any area of the body that has received medical treatment without consulting a physician prior to use.
2. Never put any part of the body between the massage heads. The squeezing action of the massage heads may cause injury. Never put any part of the body between the armrest and the chair back. Do not place hands in the mechanical portion of the legrest located under the seat.
3. Do not use against bare skin; always wear clothing. Thin clothing increases the effectiveness, but exposing the skin directly to the massager can irritate the skin.
4. Do not use for massaging the head, abdomen, elbows or knees.
5. Do not stretch the back muscles for more than approximately 15 minutes at one time. To avoid overstretching of muscles and resulting discomfort when first using the chair, do not use for more than 5 minutes. You can gradually increase duration and intensity as you adjust to the chair. Do not massage any one point for longer than 5 minutes at a time. Excessive massaging can overstimulate the muscles and nerves and result in an adverse effect. To prevent excessive massaging, do not use the massager for more than a total of 15 minutes per session. After approximately 15 minutes, the massage heads will return to the “resting” position and stop.
6. While using the massager, if you start feeling sick, or if the massage seems painful, stop use immediately. While using the massager, if the pressure seems too strong, the movement of the massage heads can be stopped by pressing the “quick stop” button.
7. When the chair back is in a reclined position, do not sit on it, or sit with your legs resting on the headrest. Do not sit on the legrest. The chair may fall over.
8. Do not allow children or pets to play on or around the chair, especially during operation.
9. Do not remove the back cushion without first reading instructions on page 15.
5

OPERATING PRECAUTIONS

WARNING: To avoid damage to the chair
1. The chair is designed for a maximum user weight of 264 lbs. (120 kg). Exceeding the maximum weight may cause permanent damage to the massage mechanism and/or other components of the chair. Any such damage is deemed to be user abuse and is not covered under the Limited Warranty.
2. Do not sit on or drop the controller. Do not pull the controller cord or the power cord. Be careful not to catch the cord of the controller between the armrest and the chair back.
3. Do not treat the chair roughly, such as forcing the reclining lever, turning the chair on its side, turning the chair over or standing on it.
4. Do not treat the covering roughly.
• Keep sharp or pointed objects away from the covering of the chair. Be careful not to
drop lit ashes or matches on the chair.
• Exposure to direct sunlight can cause fading or a change in color of the covering.
5. If the massager functions abnormally, immediately turn off the power and have the massager checked by an authorized service center.
6. Do not attempt to repair the massager yourself.
7. Do not repeatedly operate any switch at short intervals. Such action may cause the switch to malfunction.
8. Some noise may be heard coming from the massager while in use. This is due to the structure of the massager and is normal.
9. Make sure there are no obstacles behind the chair before reclining it. The chair can be reclined to a maximum angle of 160°. If the back hits a wall or pillar, the chair may malfunction. Be sure to have ample space behind the chair. Recline the chair slowly in order to avoid contact with an obstacle.
10.When excessive pressure is applied to the massage heads, they may stop moving for safety. When moving the heads up from the lowered position, one’s body weight may stop the heads’ movement. In such case, slightly raise the body and allow the massage heads to move up.
11. After each massage, slide the power switch, which is located on the back of the chair, to the “off” position and turn its lock switch to the “lock” position.
CARING FOR THE MASSAGER
• Always unplug the chair before cleaning.
• If the covering becomes soiled, dampen with liquid soap and brush the surface. Wipe with
a cloth dampened with water. Allow to dry naturally. If the plastic portions become soiled use lukewarm water, with liquid soap on a soft cloth, to clean the surface.
• Do not use thinner, benzene or other solvent-type cleaners. Chemicals can discolor or
damage the materials.
Caster
6

GROUNDING INSTRUCTIONS

• This product must be grounded. If it should malfunction, grounding provides the path of least resistance for electric current to reduce the risk of electric shock.
• This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER
• Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product even if it does not fit the outlet. Have a proper outlet installed by a qualified electrician.
• This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug shown in Figure A. Make sure that the product is connected to an outlet having the same configuration as the plug. No adaptor should be used with this product.

HOW TO MOVE THE CHAIR

CAUTION
Do not move the chair while someone is sitting in it. Failure to observe this point may cause the chair to tip over, possibly resulting in personal injury.
Use the casters to move the chair.
• Do not attempt to move the chair by lifting from the front (right illustration). The correct way to move the chair is by putting your foot on the caster and pushing down from behind the chair (left illustration).
• It is easier to move the chair if the massage heads have been moved to their resting positions and the backrest reclined.
• Moving the chair may damage easily marked floor surfaces; therefore, place a mat or cloth on the floor and move the chair slowly.
• Before pushing down the chair, prepare yourself for its weight and exercise caution when moving it.
GROUNDED OUTLET
GROUNDING PIN
Figure A
CORRECT WRONG
7

PARTS IDENTIFICATION

MASSAGE LOUNGER
CONTROLLER
Drapes over the back cushion.
Headrest
(Underneath chair cushion)
Massage heads
Armrest
Controller storage pocket
(Controller can be stored in the controller pocket [left side].)
Legrest
Attaches to the chair with zipper.
Remove for a stronger massage.
Back cushion
For extending or lowering the legrest.
Legrest lever
Intensity adjustment buttons
On/off button
Operation indicator lamp
Quick stop button
Leg massage on/off button
Reclining buttons
Massage heads adjustment (neck roller position) button
Programmed massage
course buttons
Tapping on/off button
Kneading (upward/
downward) button
Tapping button Rolling button
Stroke adjustment button
Width adjustment button
Up/down adjustment buttons
on off
on off
quick stop
leg massage
reclining
1 3 5
neck roller position
Programmed Operation
Manual Operation
whole back neck shoulder lower back
tapping
on off
up down
knead
tap
roll
intensity
down
up
stroke
24in.
4in.
width
narrow wide
Power switch
Controller
Controller storage pocket
Power plug
Operating lock switch
Power switch
on
off
on
off
NOTE:
The operating lock switch prevents the unit from being turned on when switch is in the lock position.
8

BEFORE SITTING DOWN

PLACE OF USE

TURNING ON THE POWER

BEFORE USE

• Do not use the massage lounger where it will be exposed to direct sunlight for long periods of time. Overexposure to harsh light can discolor or harden the cover.
• Do not use the massage lounger in hot or humid places or places where it may become wet from rain, splashing or dripping water, etc. Water and heat can cause discoloring and mildew.
NOTE:
Position the chair at least 16 in. (40 cm) away from any wall or other obstacle to ensure adequate reclining space.
First read and familiarize yourself with the safety precautions.
1. Plug the power cord into the inlet located at the rear of the chair.
2. Plug the power cord into an AC outlet.
NOTE:
Be careful not to pinch the cord under the leg frames of the chair or any other objects.
3. Using a flat head screwdriver or similar object, insert into the lock
switch and turn to “open”.
4. Move the power switch to “on”.
• When the operating lock switch is pointing toward “lock”, the power switch cannot be moved to the “on” position.
After each use
• Be sure to turn the power switch to “off”.
• To prevent children from using this unit, lock the power switch by moving the operating lock switch to the “lock” position.
• As a further precaution, unplug the power cord from the outlet after each use.
Do not exceed the maximum user weight of 264 lbs. (120 kg). Before sitting down, you must first check the position of the massage heads with your hands.
• The massage heads should be spread apart near the top of the massage lounger backrest in the resting position.
• If the massage heads are not in their resting position, do not sit down in the massage lounger. Press the “on/off” button on the controller twice. Wait for the massage heads to reach the resting position before sitting down. After making sure the massage heads are in the resting position, sit down slowly in the center of the massage lounger.
9

RECLINING THE CHAIR

HOW TO EXTEND THE LEGREST MANUALLY

By using the reclining button on the controller, the legrest can be raised and lowered automatically in concert with the movement of the massage lounger’s backrest.
• To avoid possible tipping of the chair, do not sit or lean on the backrest while chair back is in a reclined position.
• The angle of the chair back can be changed so that the body weight and the massage heads will work together to determine the strength of the massage.
• Try changing the angle of the chair back to find a comfortable massage of a strength that is most suitable for you. The more you recline, the more intense the massage will feel. Adding or removing the cushion insert pad will also increase the intensity.
NOTE:
Position the chair at least 16 in. (40 cm) away from any wall or other obstacle to ensure adequate reclining space.
To extend: Press and hold the button.
• While the button is pressed and held, the legrest will extend and the backrest will recline.
• Release the button when the desired position has been reached.
To lower: Press and hold the button.
• The legrest will be returned to its resting position and the backrest will be raised.
• To obtain the maximum benefit from the massage, let your body relax and recline in a comfortable manner.
NOTE:
After use, always be sure to return the legrest and backrest to their resting positions (legrest lowered and backrest raised).
By using the legrest lever on the side of the massage lounger, the legrest can be raised and lowered independently from the chair back.
To extend: Pull the lever back.
• Pull the lever back as far as it will go (until the lock catches).
• The legrest can be raised to 90°.
To lower: Push forward on the lever.
• When extending or lowering the legrest, lift your legs off of the legrest and operate the lever.
• The legrest cannot be lowered completely if the massage lounger’s backrest is not raised completely. (The same condition occurs for lever operation.)
• The legrest will be locked in position when it is raised using the legrest lever; therefore, the legrest cannot be lowered using the reclining button on the controller. Always use the legrest lever to lower the legrest if it has been raised by the legrest lever.
NOTE:
• When lowering the legrest, keep children and pets away from the massage lounger to prevent injury.
• Be aware that during powered reclining the legrest lever will move automatically.
160°
123°
85°
Can be raised to 90° by using the legrest lever
Legrest lever
quick
on
stop
off
reclining
Programmed Operation
1 3 5
on off
neck roller position
10

HOW TO USE

TO START/STOP MASSAGE ACTION

LEG MASSAGER OPERATION

Before using, first read all the instructions including the warnings and safety and operating precautions, as well as the section on programmed and manual massage.
1. To operate the massager, press the “on/off” button.
• Check to be sure that the operation indicator lamp is lit.
2. To stop the massager during operation, press the “on/off” button. The massage heads will go up, spread out and stop in their resting position.
• Check to be sure that the operation indicator lamp goes
out.
• With the heads in their resting position, you can sit com-
fortably, using the massager as a regular lounge chair.
• To resume the massage, press the “on/off” button. The
massage action or programmed massage course will start from the beginning.
• Be sure to store the controller in the pocket on the side of
the left armrest when not in use.
1. Press the leg massage “on/off” button to turn on the leg massager.
• Check to be sure that the operation indicator lamp on the
leg massage on/off button is lit.
2. To turn off the leg massager, press this leg massage on/off button again.
Automatic timer for leg massager
• To prevent continuous operation of the leg massager, there is a built-in timer that will automatically turn off the leg massager after 30 minutes of operation.
on off
on off
quick stop
leg massage
reclining
1 3 5
neck roller position
Operation indicator lamp
Leg massage button
on off
on off
quick stop
leg massage
reclining
1 3 5
neck roller position
Quick stop button
If you wish to stop the massage immediately, press the “quick stop” button. The massage heads will stop where they are.
• Check to be sure that the operation indicator lamp goes out.
• To resume the massage, press the “on/off” button. The massage action or programmed massage course will start from the beginning.
• To return the massage heads to the resting position, press the on/off button, wait, then press it again. The massage heads will then stop in a retracted resting position more comfortable for sitting.
Automatic timer for massage lounger
• To prevent excessive massage, there is a built-in timer which, after approximately 15 minutes of operation, will automatically return the massage heads to their resting position and stop their motion.
• Turning on the on/off button while the massage heads are moving to their resting position will reset the time for another 15 minutes (approximately).
• If the programmed massage button is pressed, the unit will stop after finishing the program.
on off
on off
quick stop
leg massage
reclining
1 3 5
neck roller position
Quick stop button
11

PROGRAMMED MASSAGE

First read and familiarize yourself with the safety and operating precautions.
1. Press the “on/off” button.
2. Use the “massage heads adjustment” button (neck roller position) to toggle from the highest (tallest) setting “1” to the lowest (shortest) setting “5”, in order to set the massage heads to the desired position for your neck. Massage heads (rollers) should rest comfortably at the top of your shoulders prior to the start of the massage.
• This button is to limit the height of the massage heads against your
neck and head. We recommend that a person who is 6 ft. (1.82 m) or taller use the setting “1”, while a person who is 5 ft. (1.52 m) or shorter use the setting “5”.
• Once you have made the adjustment, you can select any massage
setting you like.
• You can adjust the massage head position anytime during
massaging.
3. Press the desired programmed massage course button for the area of the body you want to have massaged. (See page 16 for details on the different massage courses.)
• Check to be sure that the course indicator lamp is lit.
Whole back: Massages the whole back.
See massage course on page 16.
Neck shoulder: Massages primarily the neck and shoulders.
See page 16.
Lower back: Massages primarily the lower back.
See page 16.
• If you do not press any button, the whole back course will start automatically about 40 seconds after you
turn on the massager.
• Massage will operate for approximately 15 minutes after pressing the button.
• If you want to change the massage course, press the button of the desired course.
• You may change the massage course at any time during operation without harm.
• Your new instructions will override any previous ones.
FOR THOSE WHO WISH TO HAVE A MASSAGE WITHOUT TAPPING
1. Press the “tapping” button when you do not want tapping in the middle of the programmed massage course. (The tapping movement changes into kneading.)
2. Press the tapping button again to re-activate.
Programmed Operation
whole back neck shoulder lower back
tapping
on off
on off
on off
quick stop
leg massage
reclining
1 3 5
neck roller position
Massage heads adjustment button
Programmed Operation
whole back neck shoulder lower back
tapping
on
tapping
on off
off
12

MANUAL MASSAGE

First read and familiarize yourself with the safety and operating precautions.
Kneading massage (upward & downward)
Press the button for the desired massage.
• The currently operating massage is indicated by the massage indicator lamps.
• It is possible to combine different massage types.
Kneading (upward/downward) massage Tapping massage Rolling massage
NOTE:
• Do not massage any one point for more than 5 minutes.
• Do not stretch the back muscles for more than approximately 15 minutes at one time. A continuous massage in the same area may result in soreness.
1. Press the “knead” button. Each time you press the knead button, the kneading direction alternates between upward and downward.
2. To raise the massage heads, press the “up” button. To lower them, press the “down” button.
3. To adjust the intensity of massage, press the “intensity” buttons.
Tapping massage
1. Press the “tap” button. The massage heads move to the narrowest position and start the tapping massage.
2. Press the “width” adjustment button to select the width of the massage heads (narrow or wide).
3. To raise the massage heads, press the “up” button. To lower them, press the “down” button.
4. To adjust the intensity of massage, press the “intensity” buttons.
Rolling massage
1. Press the “roll” button. The massage heads move to the narrowest position and start the rolling massage.
2. Press the “width” adjustment button to select the width of the massage heads (narrow or wide).
3. To raise the massage heads, press the “up” button. To lower them, press the “down” button.
• All functions that include rolling are available for the entire back, or for a limited section of the back, by
pressing the “stroke” adjustment button.
4. To adjust the intensity of massage, press the “intensity” buttons.
Manual Operation
knead
intensity
up down
tap
down
roll
up
narrow wide
width
24in.
4in.
stroke
: possible, : not possible
13
MANUAL MASSAGE
Kneading rolling massage
1. Press the “knead” button and the “roll” button. The massage heads start the kneading rolling massage.
2. To raise the massage heads, press the “up” button. To lower them, press the “down” button.
• All functions that include rolling are available for the entire back, or for a limited section of the back, by
pressing the “stroke” adjustment button.
3. To adjust the intensity of massage, press the “intensity” buttons.
NOTE:
When using a two function massage on manual mode, you can eliminate one function by pressing on that function’s control button. Thus, it is okay to change from kneading/rolling to just kneading by hitting the rolling button or to just rolling by hitting the kneading button once to toggle it off.
Tapping rolling massage
1. Press the “tap” button and the “roll” button. The massage heads move to the narrowest position and start the tapping rolling massage.
2. Press the “width” adjustment button to select the width of the massage heads (narrow or wide).
3. To raise the massage heads, press the “up” button. To lower them, press the “down” button.
• All functions that include rolling are available for the entire back, or for a limited section of the back, by
pressing the “stroke” adjustment button.
4. To adjust the intensity of massage, press the “intensity” buttons.
NOTE:
When using a two function massage on manual mode, you can eliminate one function by pressing on that function’s control button. Thus, it is okay to change from tapping/rolling to just tapping by hitting the rolling button or to just rolling by hitting the tapping button once to toggle it off.
Adjustability for Manual Massage
Adjustability
Manual Mode
Up/Down
Adjustment
Width Adjustment Stroke Adjustment
Intensity
Adjustment
23 5/8" (600 mm)
1 3/4" (45 mm)
23 5/8" (600 mm)
3 5/16" or 4 5/16" (85 or 110 mm)
1 3/4" (45 mm)
23 5/8" (600 mm)
3 5/16" or 4 5/16" (85 or 110 mm)
4 3/4" or 23 5/8" (120 or 600 mm)
5/8" (15 mm)
23 5/8" (600 mm)
4 3/4" or 23 5/8" (120 or 600 mm)
5/8" (15 mm)
23 5/8" (600 mm)
3 5/16" or 4 5/16" (85 or 110 mm)
4 3/4" or 23 5/8" (120 or 600 mm)
5/8" (15 mm)
14
Massage heads up-down adjustment
Use of the up or down adjustment button allows you to adjust the up and down direction of the massage heads.
To move the massage heads up, press and hold the “up” button. To lower them, press the “down” button. You must hold the button down until you reach the spot you want.
Massage heads width adjustment
(See page 17.)
Use of the width (narrow or wide) adjustment button allows you to select the width between the massage heads (available only in the tapping, rolling, and tapping rolling massage modes).
Press the “width” button to change the width.
Massage stroke adjustment
Use of the stroke adjustment button allows you to select the focus area of the massage strokes (available only in the rolling, kneading rolling, and tapping rolling massage modes).
Press the “stroke” button to change the stroke.
NOTE:
• Switches between regional and full: 24in.: Approx. 23 5/8 in. (600 mm) 4in.: Approx. 4 3/4 in. (120 mm)
• When “4in.” is selected, you can adjust the height of the massage heads to the desired position with the up/down adjustment buttons.
Massage intensity adjustment
Use of the intensity adjustment buttons allows you to adjust the intensity of the massage during manual operation for kneading (upward/downward), tapping, rolling, kneading rolling, and tapping rolling massage modes.
Press and hold the intensity adjustment button to choose the desired massage intensity.
NOTE:
• When you adjust the massage intensity, the massage heads’ position may change.
• The massage heads stop automatically when they reach the maximum or minimum intensity positions. When you release your finger from the button, operation will resume.
down
up
width
narrow wide
stroke
24in.
4in.
intensity
15

BACK CUSHION AND HEADREST

CUSHION INSERT PAD

• Fasten the back cushion to the chair and the headrest and insert the weighted flap through the strap attached behind the chair.
• If you prefer a stronger massage, remove the back cushion.
• When the massage function will be used, remove the headrest or flip the headrest over the back of the chair before starting the massage.
NOTE:
• This massage lounger is capable of providing a vigorous “shiatsu” massage. The rolling and tapping action are very strong, and this type of massage may be too strong for people who have not previously experi­enced a shiatsu massage. For this reason, a foam cushion insert pad is provided to soften the effect of the massage.
• The cushion insert pad can be removed for a full shiatsu massage, but be aware of the intensity of the massage you will receive. The first time you try it – if you decide to – sit in a relaxed manner and do not use it for more than two minutes. After that you should be able to decide whether or not you prefer a massage with the pad in place.
• This pad is placed underneath the back cushion at the waist position for supporting the back and the waist, and for overall chair comfort.
• Remove if unwanted during a massage.
Headrest
Back cushion
Weighted flap
Strap
Back cushion
Cushion insert pad
1 5
10
2
9
3
8
4
7 6
1 5
10
2
9
3
8
4
7 6
1 5
10
2
9
3
8
4
7 6
16

DETAILS OF PROGRAMMED MASSAGE

Whole back course
Neck and shoulder course
Complete massage including neck, shoulders, back stretching and lower back
Rolling Tapping rolling/
Kneading rolling
Upward
kneading
Downward/
upward kneading
Tapping
RollingKneading rolling/
Rolling
Upward kneading/
Kneading rolling
TappingKneading rolling/
Tapping rolling
Concentrated massage of neck and shoulders
Rolling Tapping rolling/
Kneading rolling
Upward
kneading
Downward/
upward kneading
Tapping
Tapping rolling/
Kneading rolling
Kneading rolling/
Rolling
Upward/
downward kneading
TappingKneading rolling
Lower back course
Concentrated massage of lower back
Rolling Kneading rolling/
Tapping rolling
Upward
kneading
Tapping Rolling
TappingTapping rolling/
Rolling
Tapping rollingKneading
rolling
Kneading
rolling
* The above diagrams have been abbreviated to allow easy understanding of the massage action.
17
MASSAGE HEADS RANGE OF MOVEMENT
• The vertical movement of the massage heads can be set for different areas, giving you a massage any place you like from the neck to the lower back for all massage types.
Kneading (upward/downward), Kneading rolling, and Regional kneading rolling.
Massage range width: 2 15/16 in. (75 mm) (width cannot be adjusted)
Tapping, Rolling, Regional rolling, Tapping rolling, and Regional tapping rolling
Massage range width: 3 5/16 in. or 4 5/16 in. (85 mm or 110 mm) The width (distance) between the massage heads can be adjusted in two ranges.
Neck
Lower back
2 15/16 in. (75 mm)
(Minimum width)
23 5/8 in. (600 mm)
Neck
Lower back
23 5/8 in. (600 mm)
3 5/16 in. (85 mm)
4 5/16 in. (110 mm)
Loading...
+ 38 hidden pages