Panasonic DMP-BDT330, DMPBDT230 User Manual

Owner’s Manual

Unless otherwise indicated, illustrations in this Owner’s Manual are of DMP-BDT330.

Blu-ray Disc

TM

Player

Model No. DMP-BDT330

DMP-BDT230

Firmware updates

Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (> 16) or
http://panasonic.jp/support/global/cs/ (This site is in English only.)

Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.

If you have any questions, contact:
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505

Register online at www.panasonic.com/register (U.S. customers only)

P PC

VQT4V26

Getting started

THE FOLLOWING APPLIES IN THE U .S.A.
AND CANADA

This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must
accept any interference, including interference that may caus e

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit and the applicable safety
instruction s listed below. Keep these operating instruct ions handy for
future reference.

1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that
produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding -type p lug has two bl ades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod,

bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.

13 Unplug this apparatus during lightning

storms or when unused for long periods of
time.

14 Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid ha s been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.

CAUTION

RISK OF ELECTRIC SHOCK

NOT OPEN

DO

CAUTION : TO REDUCE THE RISK OF ELECTRI C

SHOCK, DO NO T REM O VE SCREW S.
NO USER-SER VICEABLE P AR TS
INSIDE.
REFER SER VICING T O QU ALIFIE D
SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

VQT4V26

2

undesired operat ion of this device.
Contains FCC ID : NKR-P1
Contains IC ID : 4441A-P1

This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.

This product is restricted to indoor use due t o its operation in the

5.15 to 5.25 GHz frequency range.
FCC and IC require this produ ct to be used indoo rs fo r the f req uency
range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems. High power
radars are allocated as primary users of the 5.25 to 5.35 GHz and

5.65 to 5.85 GHz bands. These radar stations can cause
interference with and/or damage this product.
This equipment complies with FCC/IC radi ation exposure limits se t
forth for an uncontrolled environment and meets the FCC radio
frequency (RF) Exposur e Gui delines in Sup pleme nt C to OET65 and
RSS-102 of the IC rad io frequency (RF) Exposure r ules. This
equipment has very low levels of RF energy that is deemed to
comply without maximum permissive exposure evaluation (MPE).
But it is desirable that it should be installed and operated keeping
the radiator at least 20cm (7
(excluding extremities: hands, wrists, feet and ankles).

THE FOLLOWING APP LIE S ONLY IN THE U.S.A.
FCC Note:

This equipment has been tested and found to comply with the limits
for a Class B digi tal device, pursuant to Part 15 of the FCC Rules.
These limits are des igned to provide reasona ble protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if no t
installed and used in accordance with the instructions, may cause
harmful interference to radio communicat i ons. However, the re is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encour aged to try to correct the
interference by one or more of the following measures:

≥ Reorient or reloc ate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a ci r cuit different fro m

that to which the receiver is connected.

≥

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached
installation instructions and use only shielded interface cables when
connecting to peripheral devices.
Any changes or modifications not expressly approved by the par ty
responsible for compli ance coul d voi d the use r’s auth ority to operat e
this equipment.

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.

Declaration of Conformity
Trade Name: Panaso ni c
Model No.: DMP-BDT330

Responsible Party:
Panasonic Co r po r ati o n of North America
One Panasonic Way, Secaucus, NJ 07094

Support Contact:
Panasonic Consumer Marketing Company of North Ame rica
T elephone No.: 1-800-211-PANA (7262)

DMP-BDT230

7

/8q) or more away from person’s body

Precautions

WARNING

Unit

T o reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer servicing to qualified

service pers onnel.

AC power supply cord

≥ The power plug is th e dis c on nec ti ng de v ice . Inst al l t h is u ni t so t h at

the power plug can be unplugged from the socket outlet
immediately.

Small object

≥ Keep the Memory Card out of reach of children to prevent

swallowing.

CAUTION

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein may
result in hazardous radiation exposure.

≥ Do not place sou rc es of nak ed f la mes, such a s l igh t ed c a ndl es, on

this unit.

Placement

T o reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or in

another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with newspapers,

tablecloths, curtains, and similar items.

≥ Do not place the unit on amplifiers/receivers or equipment that

may become hot. The heat can damage the unit.

Batteries

Mishandling of batteries can cause electrolyte leakage, which can
damage items the fluid contacts and may cause a fire.
≥ Danger of explosion if bat tery is inc orre ctly replac ed. Re place on ly

with the type recommended by the manuf acturer.

≥ When disposing th e batte ries , pleas e co ntact yo ur l ocal a uthorit ies

or dealer and ask for the correct method of dis posal.

≥ Do not mix old and new ba tteries or different types at the same

time.

≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for

a long period of time with doors and windows closed.

≥ Do not take apart or sho r t ci rcu it .
≥ Do not attempt to recharge alkaline or man ganese batteries.
≥ Do not use batteries if the covering has been peeled off.

Remove batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.

Wireless LAN connection

The following limits are in place regarding the usage of this unit. You
must be aware of these limits before using this unit.
Panasonic will in no way be responsible for any incidental damage
which may arise due to a failure to obey these limits, or to any
condition of use or disuse of this unit.

≥ Data transmitted and received over radio waves may be

intercepted and monitored.

≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and
follow the following points:
– Do not expose this unit to high temperatures or direct sunlight.

– Do not bend, or subj ec t th is uni t to s tr on g imp ac ts .
– Keep this unit away from moisture.
– Do not disassemble or alter this unit in any way.

Restriction on use of
unauthorized copied content

This unit adopts the following technolo gy for copyright protect ion.

Cinavia Notice
This product us es Cinavia technolog y to limit the use of unauthorized
copies of some commercially-produced film and videos and their
soundtracks. When a prohibited use of an unauthorized copy is
detected, a mess age wi ll be d ispla yed and play back o r cop ying w ill be
interrupted.
More information about Cinavia technology is provided a t the Cinavia
Online Consumer Information Center at http://www.cinavia.com.
request addit ional inf o rmat io n abou t Cin avi a b y mai l, sen d a pos tc ar d
with your mailing address to:
Cinavia Consumer Information Center, P.O. Box 86851, San Diego,
CA, 92138, USA.

To

To dispose or transfer this unit

The unit may keep th e user settings information in the unit. If you
discard this un it either by disposal or tr ansfer, then follow the
procedure to return all the settings to the factory presets to delete the
user settings . (> 35, “To return all settings to the factory preset.”)
≥ The operation his tory may be recorded in the me mory of this unit.

Information on Dispos al in other Countries
outside the European Union

This symbol is only valid in the
European Union.
If you wish to discard this product,
please contact your local authorities
or dealer and ask for the correct
method of disposal.

(Inside of product)

VQT4V26

3

Table of contents

IMPORTANT SAFETY

INSTRUCTIONS. . . . . . . . . . . 2

Precautions . . . . . . . . . . . . . . . 3

Getting started

Accessories . . . . . . . . . . . . . . . 5

Unit and media care. . . . . . . . . 5

Playable med ia. . . . . . . . . . . . . 6

Control reference guide . . . . . . 8

Connections & Settings

Connecting to a TV. . . . . . . . . 10

Connecting to

an amplifier/receiver. . . . . . . 11

Connecting to the network . . . 13

Settings . . . . . . . . . . . . . . . . . 14

Settings

Option menu . . . . . . . . . . . . . . 27

Setup menu. . . . . . . . . . . . . . . 29

Reference

Troubleshooting guide . . . . . . 35

Messages . . . . . . . . . . . . . . . . 38

Specifications . . . . . . . . . . . . . 40

Limited Warran ty . . . . . . . 45, 46

Referencia rápida en español

(Spanish Quick Reference). . . . 47

Index . . . . . . . . . . . . . Back cover

Playback

Inserting or

removing media . . . . . . . . . . 17

HOME menu. . . . . . . . . . . . . . 18

Multi User Mode. . . . . . . . . . . 19

Playback. . . . . . . . . . . . . . . . . 20

VIERA Connect

(Enjoying Netflix, etc.). . . . . . 23

Home Network feature . . . . . . 24

“HDMI CEC”. . . . . . . . . . . . . . 26

VQT4V26

4

Accessories



R6/LR6, AA



(Alkaline or manganese batteries)

DO

DO NOT

Check the supplied accessories before using this
unit.

1 Remote control

(N2QAYB000874)

2 Batteries for remote control
1 AC power supply cord

(K2CB2CB00022)

[For_Canada]

The enclosed Canadian French label sheet corresponds
to the English display on the unit.



≥ Product numbers provided in this Owner’s Manual correct

as of December 2012. These may be subject to change.

≥ Do not use AC power supply cord with other equipment.

Unit and media care

∫ Clean this unit with a soft, dry

cloth

≥ Never use alcohol, paint thinner or benzine to

clean this unit.

≥ Before using chemically treated cloth, carefully

read the instructions that came with the cloth.

∫ This unit’s lens

Use the lens cleaner (not supplied) to clean the
unit’s lens.

∫ Clean discs

Getting startedConnectio ns & S e tt i ngsPlaybackSettingsReference

∫ Using the remote control

Insert so the poles (i and j) match those in the
remote control.

Point it at the remote control signal sensor on this
unit. (> 9)

Wipe with a damp cloth and then wipe dry.

∫ Disc and card handling

precautions

≥ Handle discs by the edges to avoid inadvertent

scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.
≥ Do not use disc cleaning sprays, benzine,

thinner, static electricity prevention liquids or
any other solvent.

≥ Clean any dust, water, or foreign matter from

the terminals on the rear side of the card.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed

stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart

shapes.

VQT4V26

5

Playable media

BD

DVD

CD

SD

USB

Device

Media

markings

— +R/+RW/+R DL

Device types Contents format

BD-Video Video

BD-RE Video, JPEG, MPO

BD-R Video, MKV

DVD-Video Video

DVD-R

DVD-R DL

DVD-RW

Video, AVCHD,
MKV, JPEG, MPO, AAC,
FLAC, MP3, WAV, WMA

Video, AVCHD

Music CD Music [CD-DA]

—

SD Memory Card (from 8 MB to 2 GB)

SDHC Memory Card (from 4 GB to 32 GB)

SDXC Memory Card (48 GB, 64 GB)

(Compatible with both mi ni an d mi cro ty pe s)

—

≥ See pages 7 and 40 for more information on the types of content that can be played.

VQT4V26

6

CD-R

CD-RW

USB devices

(up to 2 TB)

MKV, JPEG, MPO
AAC, FLAC, MP3,
Music [CD-DA], WAV,
WMA

AVCHD, AVCHD 3D,
MP4, JPEG, MPO

MKV, MP4, MPEG2,
JPEG, MPO, AAC,
FLAC, MP3, WAV, WMA

∫ Discs that cannot be played in

Example:

2

4

1

ALL

1

Example:

this unit

Any other disc that is not specifically
supported or previously described.

≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ HD DVD

∫ Region management information

BD-Video

This unit can play BD-Video discs supporting the
region code “A”.

DVD-Video

This unit can play DVD-Video discs supporting
the region number “1” or “ALL”.

∫ Finalize

DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW
recorded by a recorder needs to be finalized by
the recorder to play on this unit. Please refer to
the recorder’s instructions.

∫ BD-Video

≥ This unit supports high bit rate audio (Dolby®

Digital Plus, Dolby
Resolution Audio and DTS-HD Master Audio)
adopted in BD-Video.

≥ [BDT230] : If “Dolby D/Dolby D +/Dolby TrueHD”

is set to “PCM” and “DTS Neo:6” is set to “Off”,
the maximum possible number of Dolby
is 5.1ch PCM. (> 30, 31)

®

TrueHD, DTS-HD High

®

sound

∫ 3D

≥ 3D videos and 3D still pictures can be played

back when this unit is connected to a 3D
compatible TV using a High Speed HDMI
Cable.

≥ 2D video can be enjoyed as 3D virtually. (> 28)

∫ Music CD

≥ Operation and sound quality of CDs that do not

conform to CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed.

≥ The digital audio content side of a DualDisc

does not meet the technical specifications of
the Compact Disc Digital Audio (CD-DA) format
so playback may not be possible.

∫ SD card

≥ miniSD Cards, microSD Cards,

microSDHC Cards and microSDXC
Cards can be used, but must be used
with an adaptor card. These are
usually supplied with such cards, or
otherwise customer provided.

≥ To protect the card’s contents, move

the record prevention tab (on the SD card) to
“LOCK”.

≥ This unit is compatible with SD Memory Cards

that meet SD Card Specifications FAT12 and
FAT16 formats, as well as SDHC Memory
Cards in FAT32 format and SDXC Memory
Cards in exFAT.

≥ If the SD card is used with incompatible

computers or devices, recorded contents may
be erased due to the card being formatted etc.

≥ Usable memory may be slightly less than the

card capacity.

∫ USB device

≥ This unit does not guarantee connection with all

USB devices.

≥ This unit does not support USB device

charging.

≥ FAT12, FAT16, FAT32, and NTFS file systems

are supported.

≥ This unit supports USB2.0 High Speed.
≥ This unit supports an HDD formatted in FAT32

and NTFS. If the HDD is not recognized, the
power to the HDD may not be supplied. Supply
power from an external source.



≥ It may not be possible to play the above media in some

cases due to the type of media, the condition of the
recording, the recording method, and how the files were
created.

≥ The producers of the disc can control how discs are

played, so you may not always be able to control play as
described in this Owner’s Manual. Read the disc’s
instructions carefully.

Getting started

VQT4V26

7

Control reference guide

10

1
2

11

3

4

5

6

7

8
9

12
13
14

15
16

17

18
19

1 Turn the unit on and off
2 TV operation buttons

You can operate the Panasonic TV using the
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[ijVOL] : Adjust the volume

3 Select title numbers, etc./Enter numbers or

characters
4 Cancel
5 Basic playback control buttons (> 20)
6 Show status messages (> 21)
7 Show Pop-up menu/Top menu (> 21)
8 Show Option menu (> 27)
9 Colored buttons (red, green, blue, yellow)

Used for various purposes depending on the

display.
10 Transmit the remote control signal
11 Open or close the disc tray (> 17)
12 Select audio (> 20)
13 Show Miracast

TM

screen (> 24)

14 Show the Home screen of the VIERA

Connect (> 23)
15 Exit the menu screen
16 Show Netflix screen (> 23)
17 Show HOME menu (> 18)
18 [3, 4, 2, 1] :

Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 20)

19 Return to previous screen

VQT4V26

8

IR

[BDT330]

Pull to flip down

the front panel.

SD CARD

5789

6

1234

[BDT230]

Pull to flip down
the front panel.

1 Standby/on switch (Í/I) (> 14)

Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit

still consumes a small amount of power.
2 Open or close the disc tray (> 17)
3 Blue LED

It is possible to set the LED to turn on/off.

(> 34)
4 Start play (> 20)
5 Stop (> 20)
6 Display
7 USB port (> 17)

12

3

SD CARD

4568 791011

Getting started

8 V.OFF LED (Video off LED)

It is possible to set the LED to turn on/off.
(> 34)

9 SD card slot (> 17)
10 Remote control signal sensor

Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right

11 Disc tray (> 17)
Rear panel terminals (> 10–13)

1 Standby/on switch (Í/I) (> 14)

Press to switch the unit from on to standby

mode or vice versa. In standby mode, the unit

still consumes a small amount of power.
2 Start play (> 20)
3 Stop (> 20)
4 Open or close the disc tray (> 17)
5 Display
6 USB port (> 17)

7 SD card slot (> 17)
8 Remote control signal sensor

9 Disc tray ( > 17)
Rear panel terminals (> 10–13)

Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right

VQT4V26

9

Connecting to a TV

HDMI IN

HDMI cable

AC power supply cord

(supplied)

To a household

AC outlet

[BDT330] : Use HDMI AV OUT MAIN terminal.

[BDT230]

Connections & Settings

Connect the power supply cord after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC

power.

≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended

that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0
meters (16.4 ft.) or less.

≥ This unit consumes a small amount of AC power (> 40) even when turned off. For the purpose of

power conservation, the unit can be disconnected if you will not be using it for extended period of
time.

VQT4V26

10

Connecting to an amplifier/receiver

Amplifier/receiver

HDMI cable

HDMI cable

[BDT230]

HDMI IN HDMI IN

Amplifier/receiver

HDMI cable

HDMI cable

Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.

HDMI AV OUT

[BDT330] : Use HDMI AV OUT MAIN terminal.

HDMI IN

HDMI OUT

(ARC)

HDMI IN

(ARC)

≥ Set “Digital Audio Output” (> 30).
≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV, then connect

the TV and the amplifier/receiver. Please note, however, that the audio can only be up to 5.1ch.

≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”

(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.

HDMI AV OUT SUB [BDT330]

You can enjoy richer sound by using the HDMI AV OUT SUB terminal.

Connectio ns & S e tt i ngs

≥ Set “HDMI(SUB) Output Mode” to “V.OFF”. (> 30)

– Audio is output in high resolution regardless of compatibility of the amplifier/receiver with 3D.

≥ It is possible to play back 3D videos and 3D still pictures when the connected TV is 3D compatible,

even if the amplifier/receiver is not 3D compatible.

≥ The HDMI connection using HDMI AV OUT MAIN supports HDMI CEC (> 26).

The HDMI AV OUT SUB terminal is not compatible with the HDMI CEC.

VQT4V26

11

OPTICAL

Amplifier/receiver

Optical digital cable

[BDT330]

[BDT230]

≥ Set “HDMI Audio Output” to “Off” (> 30).
≥ Set “Digital Audio Output” (> 30).

OPTICAL IN

12

VQT4V26

Connecting to the network

Wireless router, etc.

Internet

LAN Cable

Internet

Broadband router, etc.

[BDT330]

[BDT230]

The following services can be used when this unit is connected to broadband.

≥ Firmware can be updated (> 16)
≥ You can enjoy BD-Live (> 22)
≥ You can enjoy VIERA Connect (> 23)
≥ You can access other devices (Home Network) (> 24)
≥ This unit supports Wi-Fi Direct

router. You can use this function when enjoying Home Network feature, etc. Internet access is not
available while connected via Wi-Fi Direct

For details about connection method, refer to the instructions supplied with the connected equipment.

Wireless LAN connection

This unit has built-in Wi-Fi

≥ For up-to-date compatibility information on your wireless router, refer to

http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to
http://www.panasonic.com/help (For U.S.A.)

≥ The unit is not compatible with public wireless LAN ser vices prov ided in airports, stations, cafes, etc.
≥ See page 3 for the precautions for wireless LAN connection.

TM

and can make a wireless connection to wireless devices without

TM

. (> 24, 32)

®

and can be connected to a wireless router.

Connectio ns & S e tt i ngs

LAN cable connection

≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.

VQT4V26

13

Settings

Wireless Settings

Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.

Search for wireless network
WPS (PUSH button method)

Easy Settings

After connecting your new player for the first time
and pressing [Í], the basic settings screen will
appear.

Preparation
Turn on the TV and select the appropriate
video input.

1 Press [Í].

Setup screen appears.

2 Follow the on-screen instructions to

continue with the settings.



≥ You can perform this setup anytime by selecting “Easy

Settings” in the Setup menu. (> 33)

Easy Network Setting

After completing “Easy Settings”, you can perform
“Easy Network Setting”.

Wired connection

Select “Wired” and press [OK].

Easy Network Setting

Select a connection mode.

Wired

Wireless

OK

RETURN

Follow the on-screen instructions to establish
your connection settings.

Wireless connection

1 Select “Wireless” and press [OK].
2 Select “Search for wireless network” or

“WPS (PUSH button method)” and press
[OK], then follow the on-screen
instructions to continue with the settings.

VQT4V26

14

∫ “WPS (PUSH button method)”

If you are using a wireless router that supports
WPS (Wi-Fi Protected Setup
perform the settings.

TM

), you can easily

∫ “Search for wireless network”

SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX

e.g.

Search again

Connection Setting

Reception

Select a wireless network for connection.

SSID

XXXXXXXXXX

XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX

OK

RETURN

OPTION

Wireless Settings

Enter the encryption key (password) of the wireless network.

Encryption Key

Wireless Settings

Enter your network name (SSID) to connect.

SSID

Set

The available wireless networks will be displayed.

To obtain your network name (SSID*) and
encryption key (password).

The default settings may be
printed on the router. If the
SSID and password have been
changed, consult the person
responsible for setting up your
network.

For more details, refer to the
manual supplied with the wireless broadband
router, or contact your Internet provider.

For more information or assistance, refer to
http://www.panasonic.com/help

(U.S. customers only)

1 Select your network name and press [OK].

≥ If your network name is not displayed,

search again by pressing the red button on
the remote control. Stealth SSID will not be
displayed; in this case, enter manually.

3 Enter your encryption key (password).

≥ You can switch between capital and lower

case letters by pressing the “Shift” key.

Encryption Key (Password)

l

Shift Delete

Space

OK
RETURN

d

c

b

a

a

j

i

h

q

p

o

x

w

v

~

:

/

Symbols

g

f

e

n

m

l

k

u

t

s

r

@

.

z

y

-

_

Alphanumeric Other Characters

3

2

1
4
7
*

;

,

Finish

6

5

9

8

#

0

“

‘

To enter your network name (SSID) manually

If your network name (SSID) is not displayed in
step 1, follow these steps.
1 To display the network name (SSID) input

screen :
Press [HOME]

> press [OK] to select “Setup”
> select “Player Settings”
> select “Network” and press [OK]
> select “Network Settings” and press [OK]
> select “Wireless Settings” and press [OK]
> select “Connection Setting” and press [OK]
> select “Manual setting” and press [OK]

2 Press [OK] to select “SSID” and enter your

SSID.

Connectio ns & S e tt i ngs

When your wireless network is encrypted

2 Press [OK ] to select “Encryption Key”.

Set

≥ If your wireless network is encrypted, go to

step 2.

VQT4V26

15