Panasonic DMC-ZS5, DMC-ZS6, DMC-ZS7 User Manual

Operating instructions

for advanced features

Digital Camera

Model No.

DMC-ZS7
DMC-ZS6

DMC-ZS5

Before connecting, operating or adjusting this product,

please read the instructions completely.

VQT2R20

Different

Playback Mode:

Recorded pictures can be played back in a variety of ways.

playback methods [PLAYBACK MODE]

Set to C_

Set to a position other than [_

Display the screen for Playback
Mode selection

[][NORMAL PLAY]

(444)

[] [SLIDE SHOW]

_ Select the Playback Mode from

MODE

(4119)

[] [MODE PLAY]

(4120)

[] [GPS AREA PLAY]

(4121)

[] [TRAVEL PLAY]

(4122)

[] [CATEGORY PLAY]

(4124)

[] [FAVORITE PLAY]

(4125)

:I_::_!c_ .........

®When no card is inserted, pictures (except [CLIPBOARD] pictures) are played back

from the built-in memory.

®The [PLAYBACK MODE] automatically becomes [NORMAL PLAY] when the REC/PLAY

switch is set to _ and the power is turned on, or when switching from Recording Mode

to Playback Mode.

®[FAVORITE PLAY] is only displayed when pictures have been set as [FAVORITE] and

the setting is [ON].

118 VQTZR20

Automatically play pictures in order and to music. Recommended when viewing on TV
screen.

_ Select the playback method

,,_/_. _ _,__: 1;_:_ • [ALL] : Play all
f ,,__ ) • [PICTURE ONLY]: Plays back still pictures and still pictures

_' with audio

_,_:,. • [VIDEO ONLY]: Playback of motion pictures only

• [GPS AREA PLAY] F_4_:
Selects place name or landmark to play back pictures

recorded in the same place. (Use A T _1_- to select
place name or landmark and press [MENU/SET]) (--_121)

• [TRAVEL]: Play only pictures that were recorded with the

• [CATEGORY SELECTION]:

• [FAVORITE]: Play pictures set as [FAVORITE]

[TRAVEL DATE] or [LOCATION] (--_122)

Select category and playback still pictures only.
(Select category with A • 4 _. and press [MENU/SET].)

(--_124)

(displayed only when [FAVORITE] pictures
have been set and setting is [ON]).

[EFFECT] (Select music and effects

according to picture atmosphere]

Camera selects optimum effect

[AUTO] [SWING], and [URBAN] (onty

[NATURAL]
[SLOW]
[SWING]
[URBAN]

[OFF] _

If [VIDEO ONLY] was selected in step _,
[EFFECT] is fixed at [OFF]. Also, the duration

cannot be set.

_ Select[START] with A and press [IVIENU/SET]

• Press _ to return to the menu screen during Slide Show.

from [NATURAL], [SLOW],

available with [CATEGORY
SELECTION] setting)

Play with relaxed music and
screen transition effects

Play with livelier music and
screen transition effects

No effects

[DURATION]_ [5 SEC.] (Only available when

[REPEAT] [OFF]/[ON] (Repeat)

[SOUND] audio, audio will play back.

[1 SEC.] / [2 SEC.] / [3 SEC.] /

[EFFECT] is [OFF])

[OFF]: Music and audio will not

[AUTO]:

With still pictures, music will
play back, and with motion

pictures or still pictures with

[MUSIC]:

Music effect will play back.

[AUDIO]:

Audio is played back from
motion pictures or still

pictures with audio.

[SETUP]

play back.

VQT2R20

119

Different playback methods [PLAYBACKMODE]

Playback Mode:

mOperations during Slide Show

During motion picture playback

(When paused) _'x
Previous /_

(During playback) _gQ_)_-Next
TOstart of motion _._@_

picture being played*

* The previous picture is displayed if less than 3

seconds of the motion picture has been played.

®When [URBAN] has been selected, the picture may appear in black and white as a

screen effect.

®Certain playback effects cannot be used when displaying pictures on television using

HDMI mini cables.

Pause/play

Stop

downV°lume_ Volumeup

®Music effects cannot be added.
®The duration setting is disabled during motion picture playback.
® Pictures with different aspect ratios have their edges cut so they can be displayed on

the entire screen.

This Playback Mode is useful for playing back still pictures only or only motion pictures
recorded in [AVCHD Lite] (or [MOTION JPEG]).

During still picture playback

Pause/play

(pWrhjlie Psause d) __ (NWe_i1e

Stop

Volume Volume
down up

paused)

_ Select the type of data

View pictures

_ J_ •To delete the picture _ Press _.

Previous Next

®To exit [MODE PLAY], set to [NORMAL PLAY].
®Also select [AVCHD Lite] to play back motion pictures that were recorded in [AVCHD

Lite(GPS REC)].

120 VQT2R20 I[MODE PLAY]is not available in the DMC-ZS6/DMC-ZS5.

Youcanselecttheplacenameorlandmarkoftheplacewherepictureswererecordedto
playthemback.

_ Select the range of geographical region to play back

_ Select a place name or landmark displayed

_ Firstletter of place name or landmarkdisplayed

{

View pictures

_!_ • To delete picture _Press _ (delete).

Previous Next

®The calendar screen cannot be displayed.
_.If there are many pictures, display may take some time.
®Only the following playback menu items can be used during [GPS AREA PLAY]:

[PLACE-NAME EDIT], [ROTATE DISP.], [PRINT SET], [PROTECT]

®When closing [GPS AREA PLAY], set to [NORMAL PLAY]

Displayed recording place

VQT2R20 121

Different playback methods [PLAYBACKMODE]

Playback Mode:

Play back only pictures recorded at your destination.

replay back by travel date

Pictures can be played back by travel date if [TRAVEL SETUP] E_[V[TRAVEL DATE]

was set at the time of their recording.

_ Select 'TRAVEL DATE]

J_\\ • If [ALL] is selected, all pictures for which [TRAVEL
'"_F _F,,, SETUP] _I,_I/[TRAVEL DATE] has been set
'tJ._ ' are displayed.

G,

_ Select the date to play back

_} Pictures recorded on the selected date are displayed as
_ a list.

A T : Select the week
4 I_ :Select the day

• Months in which no pictures were recorded are not
displayed.

• Dates that can be displayed are from January 2000 -
December 2099.

• When there are multiple pictures recorded on the same
date, the first picture recorded on that date is displayed

on the calendar screen.

• If a [DESTINATION] has been set that has a different
time zone, the recorded picture is displayed on the

calendar with the local date and time.

_ Select the picture

122 VQT2R20

The picture is displayed.

[] Play back by destination

Pictures can be played back by destination if [LOCATION] was set at the time of their

recording.

_ Select [LOCATION]

_ Select the item

. If there are many pictures, display may take some time.
. Of those pictures for which [LOCATION] has been set,

the one with the lowest file number is displayed as the

representative picture.

View pictures

• To delete picture _Press _ (delete).

Previous Next

®[CLIPBOARD] pictures are not dispaayed even if [TRAVEL MODE] is set.
®Only the following playback menu items can be used during [TRAVEL PLAY].

[PLACE-NAME EDIT], [ROTATE DISP.], [PRINT SET], [PROTECT]

VQT2R20

123

Different playback methods [PLAYBACKMODE]

Playback Mode:

Pictures can be classified automatically and viewed by category. Automatic classification
starts when ]CATEGORY PLAY] is selected from the Playback Mode selection menu.

[CATEGORY] Recording information

_=== Pictures taken using Face

D PORTRAIT]/

(dark blue)
No. of pictures (appears after a few seconds)

• For _i (Playback by Person), use A T _1I_
to select the person, and then press

[MENU/SET].

View pictures

• To delete pictures
Press _.

Previous Next

I_] [FOOD]
L_ [UNDERWATER]
I_ [MOTION PICTURE]

®Calendar display cannot be used.
_.Pictures taken without name settings in [FACE RECOG.] are not categorized.

®The following playback menus can only be set:

[PLACE-NAME EDIT], [ROTATE DISR], [PRINT SET], [PROTECT]

®To close [CATEGORY PLAY], select [NORMAL PLAY].

' such as Scene Modes

Recognition
[PORTRAIT]/[i PORTRAIT]/

[SOFT SKIN]/
[TRANSFORM]/[SELF

[NIGHT PORTRAIT]/
[i NIGHT PORTRAIT]/

[BABY]/[i BABY]
[SCEN ERY]/[i SCENERY]/

[SUNSET]/[AERIAL
PHOTO]/[i SUNSET]

[NIGHT PORTRAIT]/
[i NIGHT PORTRAIT]/

[NIGHT SCENERY]/
[i NIGHT SCENERY]/

[STARRY SKY]
[SPORTS]/[PARTY]/
[CANDLE LIGHT]/

[FIREWORKS]/[BEACH]/
[SNOW]/[AE RIAL PHOTO]

[BABY]Ill BABY]
[PET]

124 VQT2R20

Manually play pictures set in [FAVORITE] (displayed only when [FAVORITE] pictures are
present and setting is [ON]).

View pictures

Previous Next

_.Calendar display cannot be used.
®The following playback menus can only be set:

[PLACE-NAME EDIT], [ROTATE DISP.], [PRINT SET]), [PROTECT]

®To close [FAVORITE PLAY], select [NORMAL PLAY].

VQT2R20 125

Using the [PLAYBACK] menu

Playback Mode: _ (Set mode dial to any except {_)

You can edit or protect recorded pictures.

• Depending on the Playback Mode, some [PLAYBACK] menu items are not displayed.

• New pictures are created after editing pictures with tools such as [TEXT STAMP] and
[RESIZE]. Before starting to edit, make sure that there is enough free space in the built-

in memory or memory card.

Select the date from the calendar screen to view only the pictures taken on that day (4114).
Set-up: Press [MENU/SET]-_ (_ [PLAYBACK] menu _ Select [CALENDAR]
®This setting can only be made when the Playback Mode is [NORMAL PLAY].

You can give titles, etc. to your favorite still pictures.
Set-up: Press [MENU/SET]_ 1_} [PLAYBACK] menu _ Select [TITLE EDIT]

_ Press A T to select [SINGLE] or [MULTi], and then press

[MENU/SET]

_ Select still picture

_ Enter characters (Entering text (4113))

(After confirmation, press _ to return to the menu screen in [SINGLE] setting.)

[] To edit

Select [SINGLE] in step @ _ select still picture with 4 I_, and press [MENU/SET]_
correct text and select [EXIT] _ press _ to return to the menu.

®Cannot be used with still pictures taken on other devices, protected still pictures, or

motion pictures.

®To print text, use [TEXT STAMP] or the supplied CD-ROM 'PHOTOfunSTUDIO'.

®[SINGLE]

DISPLAY

_ [MULTI] (up to 50 pictures with the same text)

[TITLE EDIT] setting
[TITLE EDIT] already

set

.Tocancel-*Press

[DISPLAY] again.

.Toexecute-_

Press [MENU/SET].

126 VQT2R20

You can edit place name information recorded by GPS function.
Operation: Press [MENU/SET] on the playback screen and select

_ Select the picture

(_ [PLAYBACK] menu _ [PLACE-NAME EDIT]

_ Enter characters (Enteringtext

(-_113))

_ Select [YES]

_ Select the location name or

landmark name to edit.

lf you want to edit another

location name or landmark
name, repeat steps @ to _

oAfter setting, press _ toreturn tothe

menu screen.

_ Select [REPLACE]

i/ f,r_,

[] To delete a location name or landmark name

In step @, select [DELETE] with T, and then select [YES].

Motion pictures can be split to delete unnecessary scenes.
For details (4117)

VQT21R2O 127

Using the [PLAYBACK] menu (cont ooed)

Playback Mode: _ (Set mode dial to any except _)

The recording date and time, location name information and the text registered in the
[BABY], [PET] Scene Modes, [TRAVEL DATE] and [TITLE EDIT] are stamped on the still
picture.

Set-up: Press [MENU/SET] _ _ [PLAYBACK] menu _ Select [TEXT STAMP]

_ Press A T to select Select whether to stamp

[SINGLE] or [MULTI], and age

then press [MENU/SET]

Select still picture _8_,,
®[SINGLE]

• If [NAME] is [OFF] in Step @, this
screen will not be displayed.

_ Select [YES]

®[MULTI] (up to 50 pictures)

DISPLAY

• To cancel _ Press [DISPLAY]

• To execute _ Press [MENU/SET].

_ elect items and make

settings for each

button again.

[TEXT
STAM P]
setting

(Screen varies according to picture
size, etc.)

• When you have selected [SINGLE], after
step _, press _ to return to the menu

screen.

° Picture size will be reduced if greater

than 3M. Picture will become slightly
grainier.

Aspect ratio [TEXT STAMP]

4:3 3M
3:2 2.5M

16:9 2M

After

128 vQT2R20

[] items that can be stamped

[SHOOTING DATE] [W/O TIME]: Stamps recording date

[NAME] _i: Stamp name registered in Face Recognition

[LOCATION] Stamp Destination registered in [TRAVEL MODEl's [LOCATION]
[TRAVEL DATE] Stamp Travel Date set in [TRAVEL MODE]'s [TRAVEL DATE]

[TITLE] Stamp text registered in [TITLE EDIT]
[COUNTRY]

[STATEICOUNTY] Stamps place name information recorded by GPS function
[CITY/TOWN] possible to stamp all the text.

[LANDMARK]

• The item cannot be stamped when function is turned [OFF].

[]To check stamped text

'Playback Zoom' (444)

_Cannot be used with still pictures taken on other devices, still pictures taken without

setting Clock, motion pictures, or stiff pictures with audio.

_After [TEXT STAMP] is applied, pictures cannot be resized or cropped, and

[LEVELING], [ASPECT CONV.], [TEXT STAMP] and date printing settings cannot be

changed on pictures.
_ Characters may be cut off on certain printers.
_Text is difficult to read when stamped on pictures of 0.3M or less.
_Do not request date printing in store or make date printing on printer for still

pictures with date stamps. (Date printing may be overlapping.)

[WITH TIME]: Stamps recording date and time

_,/_: Stamp name registered in [BABY] or [PET]

• If text such as the location name or landmark name is long, it may not be

VQT2R20 129

Using the [PLAYBACK] menu (continued)

Playback Mode: _ (Set mode dial to an]/except {_)

Picture size can be reduced to facilitate e-mail attachment and use in web pages, etc.
(Still pictures recorded at the smallest recording pixel level cannot be further reduced.)

Set-up: Press [MENU/SET]_ {_ [PLAYBACK] menu _ Select [RES[ZE]
m[SINGLE]

size

-Size after
change

• After confirmation, press _ to return
to the menu screen.

=[MULTI]

_ elect [MULTI] in step _1

above

_ Select size

description
of resize:

Press the
[DISPLAY]

button

Select number of pixels
after resizing

see

Select still picture
(upto 50 pictures)

DISPLAY

Number of pixels before/after

resizing

• To cancel
Press [DISPLAY] button again.

• To execute _ Press [MENU/SET].

_ Press • to select [YES],

and then press [MENU/SET]

®Picture quality is reduced after resizing.

@Cannot be used with motion pictures, still pictures with audio, or still pictures with text

stamp. May not be compatible with still pictures taken on other devices.

130

-Resize
setting

Enlarge your still pictures and crop unwanted areas.
Set-up: Press [MENU/SET]--_ (_ [PLAYBACK] menu _ Select [CROPPING]

_ Press _1I_ to select a still picture, and then press [MENU/SET]

_ Select area to crop

Expand Change Crop

_ Press A to select [YES], and then press [MENU/SET]

• After confirmation, press _ to return to the menu screen.
_Picture quality is reduced after cropping.
_Cannot be used with motion pictures, still pictures with audio, or still pictures with text

stamp. May not be compatible with still pictures taken on other devices.

_Original Face Recognition information will not be copied when still pictures are cropped.

Slight slanting in the still picture can be corrected.
Set-up: Press [MENU/SET]--_ (_ [PLAYBACK] menu _ Select [LEVEMNG]

position

_ ress _1I_ to select a still picture, and then press [MENU/SET]

Adjust the slant

I \S

_ Press A to select [YES], and then press [MENU/SET]

• After confirmation, press _ to return to the menu screen.
_.Picture quality is reduced when leveling is performed.

_The resulting still picture may have fewer recording pixels than the original still picture

when leveling is performed.
_May not be compatible with still pictures taken on other devices.
_Cannot be used with motion pictures, still pictures with audio, or still pictures with text

stamp.
_Original Face Recognition information will not be copied when still pictures are leveled.

VQT2R20 131

Using the [PLAYBACK] menu (cont n.÷m

Playback Mode: _ (Set mode dial to any except _)

Convert still picturestaken in _ to _ or _ for printing.

Set-up: Press [MENU/SET] 4 _ [PLAYBACK] menu 4 Select [ASPECT CONV.]

_ elect horizontal position

and convert

(Moveporirait

pictures

usingA'_)

_ Select still picture taken in

Changes to outlined size

{04

_ ress A to select [YES], and

then press [MENU/SET]

• After confirmation, press _ to return
to the menu screen.

® Picture size may be increased after Aspect Ratio is changed.
®Cannot be used with motion pictures, still pictures with audio, still pictures with text

stamp, or non-DCF files (444). May not be compatible with still pictures taken on other
devices.

®Original Face Recognition information will not be copied when Aspect Ratios are

converted.

Automatically rotate portrait still pictures.
Set-up: Press [MENU/SET] 4 _ [PLAYBACK] menu 4 Select [ROTATE DISR]

_ Select [ON]

_ [ON] [OFF]
\._.?/

_ [ROTATE DISP.] cannot be used with motion pictures.
®Some pictures taken facing up or facing down may not be rotated automatically.

It may not be possible to rotate still pictures taken with certain other devices.
® Pictures cannot be rotated during Multi Playback.
®Will only be displayed rotated on computer if in Exif-compatible (444) environment (OS,

software).

132 VQT2R20

By labeNng your favorite pictures with a star (_), you can enjoy [SLIDE SHOW] or
[FAVORITE PLAY] of these pictures only, or you can delete aNpictures except your
favorites (_45).

Set-up: Press [MENU/SET]--_ _ [PLAYBACK] menu _ Select [FAVORITE]

_ Select [ON]

_, ......................._,

_] Close the menu

select picture and make setting (repeat)

" set (not displayed (For AVCHD Lite motion pictures,

_i_ s Displayedwhen * Up to 999 pictures can be selected.

<- when [OFF]). 999 or more pictures can be set.

G_ !!tilt)

• To release _ Press _I' again.

[] To clear all

Select [CANCEL] in step _ and select [YES].
® It may not be possible to set pictures taken with certain other devices as favorites.
®Setting/release can also be made with supplied software 'PHOTOfunSTUDIO'.

VQT2R20 133

Using the [PLAYBACK] menu (continued)

Playback Mode: _ (Set mode dial to an]/except _)

Picture/picture no./date printing settings can be made for when printing with DPOF print-
compatible shops or printers. (Ask at shop to check compatibility)

For more information visit:
http://panasonicjp/dc/dpof 110/white e.htm
Set-up: Press [MENU/SET]_ (_ [PLAYBACK] menu _ Select [PRINT SET]

_ Select picture

®[SINGLE] _ [MULTI]

Set number of pictures
(repeat steps _} and _ when using [MULTI] (up to 999 pictures))

® [SINGLE] ® [MULTI]

-No. to print _

.No. to print

_'

"_" -Date print "_'

• Date print setting/release -_ Press [DISPLAY] button.

• After confirmation, press _ to return to the menu screen.

[] To clear all

Select [CANCEL] in step _ and select [YES].

_ When using PictBridge-compatible printers, check settings on actual printer as these may take

priority overcamera settings.
®Toprintfrombuilt-inmemoryat a shop,firstcopypicturestocard (_137) beforemakingsettings.
®Cannot be set for files that are notcompliant with the DCFstandard (_44).

_ Some DPOFinformation set by other equipment cannotbe used. In suchcases, delete allof the

DPOF information andthen set it again with this camera.
_ Date printingsettings cannot be madefor pictures with a [TEXT STAMP] applied.These settings will

also becanceled if a [TEXT STAMP] is applied later.
®Motion pictures recorded in [AVCHD Lite] format cannot be set.

set

Date print set

134

Set protection to disable picture deletion. Prevents deletion of important pictures.
Set-up: Press [MENU/SET] _ (_ [PLAYBACK] menu _ Select [PROTECT]

_ Select picture and make setting

_[SINGLE] ®[MULTI]

Picture protected Picture protected

[] To clear all

Select [CANCEL] in step @ and select [YES].

[] To cancel while releasing all

Press [MENU/SET].

®May not be effective when using other devices.
® Formatting will cause even protected files to be deleted.
® if the write-protect switch is set to 'LOCK,' pictures cannot be deleted even if they are

not protected with the camera setting.

• To cancel _ Press
[MENU/SET] again.

• After confirmation,
press _ to return to

the menu screen.

VQT2R20 135

Using the [PLAYBACK] menu cont nu÷d)

Playback Mode: _ (Set mode dial to any except _)

Edit or delete the recognition information for pictures with mistaken Face Recognition.
Operation: On the playback screen, press [MENU/SET] and select 1_ [PLAYBACK]

_ { ,'r, _¢',,,

menu _ _i [FACE REC EDIT]

Select [REPLACE] or _ Select the person to replace

[DELETE] _ for another

Select the picture _ Select [YES]

.... Q_Y

!,j@' _

_ Select a person

• If [DELETE], go to step _/

• People whose Face Recognition
information has not been registered

cannot be selected.

@When Face Recognition information is deleted, it cannot be restored.
@Pictures for which all Face Recognition information has been deleted are not

categorized in Face Recognition during [CATEGORY PLAY].

® Recognition information cannot be edited in protected pictures.

, After setting, press _ to return to the

menu screen.

136

You can copy pictures between built-in memory and memory card.
Set-up: Press [MENU/SET] _ _ [PLAYBACK] menu _ Select [COPY]

I_,-L__:Copy 1 picture at a time from card to clipboard

folder (in built-in memory) (not motion pictures).

_ Select picture with ,4 _ and press [MENU/SET] (for E-6_ and

i_,--3')

_ Select [YES]

_ If there is not enough space on the built-in memory for copying to be performed, turn

off the power, remove the card, and delete pictures from the built-in memory (to delete
clipboard pictures, set the mode dial to Clipboard Mode).

_Copying of picture data from the built-in memory to memory cards will be terminated

midway if there is insufficient space on the card. Using memory cards with higher
capacities than the built-in memory (approx. 15 MB _, approx. 40 MB ) is
recommended.

_Copying pictures may take several minutes. Do not turn off power or perform other

operations during copying.

_ If identical names (folder/file numbers) are present in the copy destination, a new

folder for copying will be created when copying from built-in memory to card (_-,[_]).

Identically-named files will not be copied from card to built-in memory (i_,-*[_]).
_The print settings and protection settings are not copied. Set them again after copying.
®.Only pictures from Panasonic digital cameras (LUMIX) may be copied.
_Original pictures will not be deleted after copying (to delete pictures (--_45)).
_.This setting can only be made when the Playback Mode is in [NORMAL PLAY].
_Motion pictures recorded in [AVCHD Lite] format cannot be set. F_

• To cancel _ Press [MENU/SET].

• After confirmation, press _ to return to the menu
screen.

• After all the pictures are copied from the built-in
memory to the memory card, the display returns
automatically to the playback screen.

(Screen shown is example)

VQT2R20 137

Keep the recorded still pictures and

motion pictures

The methods for copying still and motion pictures recorded with this camera to other
devices vary according to the file format (JPEG, AVCHD Lite*, Motion JPEG). Follow the
correct method for your device. * _ only

Available file types: _ AVCHD Lite*, Motion JPEG

Videos that are played on this camera can be dubbed to media such as a DVD disc, hard
disk or video tape using a device such as a DVD recorder or video recorder. This method
is useful as it allows dubbing to be performed even with devices that are not compatible
with high definition (AVCHD) images. Picture quality will be reduced from high definition

to standard definition.

Example of DMC-ZS7
AV cable

(always use cable
supplied)

To recorder's input socket playback on the camera.

@Do not use any other AV cables except the supplied one.
®When using a TV with a 4:3 aspect ratio, always change the camera's [TV ASPECT]

setting (426) to [4:3] before dubbing. Motion pictures copied in the [16:9] setting will
appear vertically stretched when viewed on a 4:3 TV screen.

® Pressing the camera's [DISPLAY] button and turning the LCD display off is

recommended during dubbing operations. (446)

® For details on dubbing and playback methods, refer to your recorder's operating

instructions.

_ Connect camera to recorder

_ Start playback on camera

_ Start recording on recorder

• To stop recording (dubbing), stop the recording
on your recorder first before stopping the

138 VOT2R20

Available file types: _ JPEG/_ AVCHD Lite*, Motion JPEG

With the 'PHOTOfunSTUDIO' software on the supplied CD-ROM, a computer can be
used to manage the recorded pictures.

®Main 'PHOTOfunSTUDIQ' functions

, Copying recorded still picturesor motion pictures toa computer
, Backing up still pictures or motion pictures that have been copied to acomputer to media such as

a DVD

, Editing still pictureson a computer
, Converting motion pictures recordedin [AVCHD Lite]to standard picture quality to create a DVD

video

, Stitching still pictures recordedin SceneMode [PANORAMAASSIST] into apanorama
, Attaching recordedstill pictures to e-mail
, Uploading recorded motionpictures to YouTube

_ Install 'PHOTOfunSTUDIO' to your computer

_ Connect the camera toyour computer

• For connection procedures ( 141)

Use 'PHOTOfunSTUDIO' to copy pictures to your computer

• For details on how to use 'PHOTOfunSTUDIO', see the 'PHOTOfunSTUDIO'
manual (PDF).

Files and folders containing copied AVCHD Lite motion pictures cannot be played back or
edited if they have been deleted, modified, or moved using Windows Explorer or similar
methods. Always use 'PHOTOfunSTUDIO' when handling AVCHD Lite motion pictures.

The 'PHOTOfunSTUDIO' software on the CD-ROM (supplied) can be used to copy still
pictures and motion pictures to your computer and to play them back.

VQT2R20 139

Using with your PC

Still/motion pictures can be copied from the camera to your computer by connecting the

two together.

• If your computer does not support SDXC memory cards, a message will be displayed
requesting you to format the card. (Do not format the card. This will erase recorded
pictures.) If the card is not recognized, refer to the following support website.
http://panasonic.net/avc/sdcard/information/S D XC.html

• Copied pictures can then be printed out or sent by e-mail using the 'PHOTOfunSTUDIO'
software on the CD-ROM (supplied).

mComputer specifications

98/98SE [ Me/2000 XP/Vista/7 OS 9/OS X

Can I use
'PHOTOfunSTUDIO'?

Can l copy AVCHD Lite
motion pictures to my
computer?

Can I copy still pictures
and Motion JPEG motion

)ictures from my camera

to my computer via USB
connection cable?

• USB connection cables cannot be used with Windows 98/98SE, Mac OS 8.x, or older
versions of either, but still/motion pictures may still be copied with compatible SD

memory card reader/writers.

.11nternet Explorer 6.0 or above must be installed.

Correct playback and operation depends on your computer's environment and cannot
always be guaranteed.

•ZAIways use 'PHOTOfunSTUDIO' when copying AVCHD Lite motion pictures.

No No

No

iiiiiiiii!iiii!!!iiil

No

No

!i!i!i!i!i!i!i!i!i!i!i_i_i_ii_i_i_I_I_I_I_I_I_I_I_i_i'ii_ii_i!iii_ii_ii_ii_ii_ii_ii_ii_ii_ii!ii!ii!i!!_!_!_!_!_!_!_!_!_!!_!i!i!iii_i_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_iii_ii_ii_ii:i_!_i!_i_!i!i_i_i_i_i_i_i_i_iiii_!!

_i!_!_ii_ii_ii_ii_i_i_i_i_i_i!_i!_i_i_i!_!_i_i_i!_i_i_i_i_i_i_!_!!_!!_!_!!_!_i!_i!_i!_i!_i!_i!_i!_i!ii_i!ii!_!_!_i!_i!_i_i_!_i!_ii_!i

i_i_i!_iiiiiiiii_ii_ii_iiiiiiiiiiiiiiiii_ii!iiiiiii_!_!_!_!!i_i!!_ii_iiiii_i!i!!ii!!i_iiiiiiiiii!!!!!!!i!i¸¸

140 vQT2R20

Getting Ready:

• Charge the battery sufficiently. Or, connect the AC adaptor (optional) and DC coupler
(optional). (414, 15)

• insert card and set mode dial to any except [_. When importing pictures from the built-
in memory, remove any memory cards.

Check socket direction and insert straight in.
(Damage to socket shape can tead to faulty operation.)

)le of DMC-ZS7

[ACCESS] (sending data)

Do not disconnect the USB connection
cable while [ACCESS] is displayed.

Turn on power of both

camera and computer

Connect camera to

computer

• Please make sure you use the

suppliedUSB connectioncable.

Use ofcablesotherthanthe

suppliedUSB connectioncable

may cause malfunction.

USB connection cable
(always use cable supplied)

_ Select [PC] on the camera

A message may be displayed on screen

if [USB MODE](-*26) is set to [PictBridge
(PTP)]. Select[CANCEL] to close the
screen, andset [USB MODE] to [PC].

Operate with your
computer

into cancel connection

Click 'Safely Remove Hardware' in the Windows System Tray _ disconnect USB
connection cable _ turn off camera power _ disconnect AC adaptor

VQT2R20

141

Using with your PC (Cont n.÷d)

You can save pictures to use on your computer by dragging and dropping folders and

files into separate folders on your computer.

mFolder and file names on computer

__ DClM (Still/motion pictures)

I- 100 PANA (Up to 999 pictures/folder

®Windows . JPG:

Drives are displayed _ 1P110_009_9AJPG Still pictures

in 'My Computer' or MOV:

'Computer' folder. L_ 999_PANA Motion pictures

®Macintosh

Drives are displayed on

the desktop.

(Displayed as 'LUMIX',

'NO_NAME', or
'Untitled'.)

_New folders are created in the following cases:

• When pictures are taken to folders containing files numbered 999.

• When using cards already containing the same folder number (including pictures
taken with other cameras, etc.).

• When recording after performing [NO.RESET] (425).

• File may not be able to be played back on camera after changing file name.

• If mode dial is set to [_', built-in memory data (including clipboard pictures) are
displayed even when card is inserted. Data in card is not displayed.

• Do not delete or modify folders or data in the AVCHD folder using Windows
Explorer or other tools. The camera may be unable to play back the motion
pictures correctly if any of these files are deleted or modified. For data
management and editing of motion pictures recorded in [AVCHD Lite(GPS
REC)] or [AVCHD Lite], use the 'PHOTOfunSTUDIO' software on the supplied

CD-ROM. F_

Ill!When using Windows XP, Windows Vista, Windows 7, or Mac OS X

The camera can be connected to your computer even if [USB MODE] (426) is set to
[PictBddge (PTP)].

• Only picture output can be performed from the camera. (Picture deletion can also be
performed with Windows Vista and Windows 7.)

• It may not be possible to import if there are 1000 or more pictures on the card.

• Motion pictures recorded in [AVCHD Lite(GPS REC)] or [AVCHD Lite] format cannot

be read.

.........P1000001.JPG

-_ MISC (DPOF files, Favorite)
_ PRIVATE1 (clipboard pictures) Built-in

MEMO0001 JPG memory

i

(Motion pictures in AVCHD Lite)

AVCHD
MODEUNF

(VIERA Link information)

When using
memory card

Built-in

memory/
Card

142 VQT2R20

[] Playing motion pictures recorded in [AVCHD Lite(GPS REC)] or [AVCHD

Lite] on your computer _l

CbUsethe 'PHOTOfunSTUDIO' software on the supplied CD-ROM.
@Savethe motion picture to your computer, and play itback.

[]Playing motion pictures recorded in [MOTION JPEG] on your computer

C1_Use the 'QuickTime' software on the supplied CD-ROM.

• Installed as standard on Macintosh

C2_Savemotion pictures to your computer before viewing.

®Do not use any other USB connection cables except the supplied one.
®Turn off power before inserting or removing memory cards.
®When the battery begins to run out during communication, a warning beep sounds.

Cancel communication via your computer immediately (recharge the battery before
reconnecting).

®Setting the [USB MODE] (--_26) to [PC] removes the need to make the setting each time

the camera is connected to the computer.

® For more details, consult your computer operating manual.

vo 2R20143

You can connect directly to a PictBridge-
compatible printer for printing.

Getting Ready:

• Charge the battery sufficiently. Or, connect
the AC adaptor (optional) and DC coupler

(optional).

• Insert card and set mode dial to any setting

except [_'. When copying pictures from the
built-in memory, remove any memory cards.

(Copy [CLIPBOARD] pictures to the card in
advance)

• Adjust the print quality or other settings on
your printer, as needed.

• Do not disconnect the USB connection cable when
the cable disconnection icon _ is displayed (may

not be displayed with some printers),

Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty

operation,)

Example of DMC-ZS7

Turn on power of camera
and printer

_ Connect camera to printer

• Please make sure you use the
supplied USB connection cable. Use

of cables other than the supplied
USB connection cable may cause

malfunction.

Select [PictBridge (PTP)]
on the camera

When [CONNECTING TO PC...]
is displayed, cancel the connection

and set [USB MODE] (-*26) to either
[SELECT ON CONNECTION] or
[PictBridge (PTP)].

_ Press 41_ to select a

picture to print and press

[MENU/SET]

USB connection cable
(always use cable supplied)

|To cancel print Press [MENU/SET]

(Print settings (--_146))

® Do not use any other USB connection cables except the supplied one.
® Disconnect USB connection cable after printing.
_{Turn off power before inserting or removing memory cards.
®When the battery begins to run out during communication, a warning beep sounds.

Cancel printing and disconnect USB connection cable (recharge the battery before
reconnecting).

®Setting the [USB MODE] to [PictBridge (PTP)] removes the need to make the setting

each time the camera is connected to the printer.

®Motion pictures recorded in [AVCHD Lite] format cannot be printed.

144 VQT2R20

Select [MULTI PRINT] in (_ Select item _) Print
step _l on the previous (See below for details) (Previous page _)
page

• [MULTI SELECT] :_ Scroll between pictures with A _' _ _, select pictures to print with the
[DISPLAY] button. (Press [DISPLAY] buttonagain to release selection.)

Press [MENU/SET] when selection is complete.

• [SELECT ALL] :Print all pictures.

• [PRINT SET (DPOF)] :Print pictures selected in [PRINT SET]. (--_134)

• [FAVORITE] :Print pictures selected as [FAVORITE]. (--_133)

(displayed only when [FAVORITE] pictures are present and setting

is set to [ON]).
®Select [YES] if print confirmation screen is displayed.
_.An orange • displayed during printing indicates an error message.
®Print may be divided into several times if printing a large amount of pictures.

(Remaining sheets display may differ from set number.)

[] With [TEXT STAMP]

Recording date and following information can be embedded into still pictures (4128):
®_Recording date ®[NAME] and [AGE] from [BABY] and [PET] Scene Modes
_[TRAVEL DATE] elapsed days and destination ®Text registered in [TITLE EDIT]
_Names registered in [FACE RECOG.]

®Location name information recorded with the GPS function

• Do not add date printing in stores or with printers to still pictures where [TEXT
STAMP] is applied (text may overlap).

[] Printing date without [TEXT STAMP]

®Printing in store: Only recording date can be printed. Request date printing in store.

• Making [PRINT SET] settings on the camera in advance allows settings for numbers

of copies and date printing to be designated before giving the card to the store.

• When printing still pictures of 16:9 Aspect Ratio, check in advance that the store

can accept this size.

®Using computer:Print settings for recording date and text information can be made

using the supplied CD-ROM 'PHOTOfunSTUDIO'.

®Using printer :Recording date can be printed by setting [PRINT SET] on the

camera, or by setting [PRINT WITH DATE] to [ON] when connecting
to a printer compatible with date printing.

VQT2R20 145

Printing

(Make settings before selecting [PRINT START])

Select item CgbSelect setting

kerl} I Settings

[PRINTWITH [OFF]/[ON]
DATE]

[NUM.OF
PRINTS] Set number of pictures (upto 999 pictures)

I_1 (printer takes priority) [A3] (297x420 mm)

]PAPER [2L/5"x7"] (127x178 mm) [4"x6"] (101.6×152.4 mm)
SIZE] [POSTCARD] (100x148 mm) [8"x10"] (203.2 ×254 mm)

[PAGE _ (printer takes priority) / El (1picture, no border) /
LAYOUT] r_ (1 picture, with border)/[_1_ (2 pictures) / lellel(4 pictures)

® Items may not be displayed if incompatible with printer.
®To arrange _t_ '2 pictures' or _ '4 pictures' in the same still picture, set the

number of prints for the still picture to 2 or 4.

®To print to paper sizes/layouts not supported by this camera, set to _ and make

settings on the printer. (Consult your printer's operating manual.)

®[PRINT WITH DATE] and [NUM.OF PRINTS] are not shown when you have

selected ]PRINT SET] settings.

® Even with completed ]PRINT SET] settings, dates may not be printed, depending

on the shop or printer used.

®When setting ]PRINT WITH DATE] to [ON], check the date printing settings on the

printer (printer settings may be prioritized).

[L/3.5"xS"] (89×127mm) [10×15cm] (100×150 mm)

[16:9] (101.6×180.6 mm) [LETTER] (216×279.4 mm)
[A4] (210 ×297mm) [CARD SIZE](54×85.6 mm)

HIBI

J

146 VQT R O

You can view pictures on a TV screen by
connecting your camera to your TV with
the AV cable (supplied) or HDMI mini cable
(optional _ ).

®Also consult TV operating manual.

_ Connect camera to TV

Turn on TV

®Set to auxiliary input.

Getting Ready:

• Set [TVASPECT]. (426)

• Turn off both camera and TV.

Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty
operation.)

AV cable
(always use cable supplied)

==When TVs or DVD recorders have an SD card slot

Insert the SD memory card into the SD card slot

• Still pictures only can be played back.

• AVCHD Lite motion pictures can be played back on Panasonic televisions (VIERA)
displaying the AVCHD logo.
To play motion pictures on other televisions, please connect the camera to the
television with the AV cable (supplied).

• When using both SDHC and SDXC memory cards, be sure to play each type of card
in equipment compatible with the particular format.

Yellow: To video socket
White: To audio socket _ (L) (Monaural)

Red: To audio socket (R)

Turn on camera
Set REC/PLAY switch to

_.Do not use any other AV cables except the supplied one.
®You can play back pictures on TVs in other countries (regions) which use the NTSC or

PAL system when you set [VIDEO OUT] in [SETUP] menu. (DMC-ZS5PU only.)
®[LCD MODE] setting is not reflected on TV.
®Some televisions may cut off the edges of pictures, or not display them full screen.

Pictures rotated to portrait may be blurred slightly.

®Change picture mode settings on TV if aspect ratios are not displayed correctly on

widescreen or high-definition televisions.

VQT2R20 147

Viewing on TV screen (Cont n.÷d)

An HDMI mini cable (optional) can be used to enable viewing of still and motion pictures
in high resolution.

What is HDMI?

High-Definition Multimedia Interface (HDMI) is an interface for digital video devices, Digital video
and audio signals can be output by connecting the camera to an HDMI-compatible device, This

camera can be connected to a High-definition TV compatible with HDMI to enjoy recorded pictures
and motion pictures at high resolution, Connecting the camera to a Panasonic TV (VIERA)

compatible with VIERA Link (HDMI) enables linked operation (VlERA Link), (--_149)

Preparation:

• Check the [HDMI MODE]. (_27)

• Turn off the camera and TV.
Check the socket direction and insert straight in.

(Damage to socket can lead to faulty operation.)

HDMI video/audio input socket

(When there are multiple sockets,

connect to one besides HDMI1 .)

HDMI mini cable (optional)

_ Connect camera to TV

Turn on TV

_Set to HDMIinput.

Turn on camera

Set REC/PLAY switch

to I_

_ Do not use any other cables except a genuine Panasonic HDMI mini cable (optional).
_ Playback cannot be performed in [CLIPBOARD] Mode,

*_Blank stripes may appear at the sides or at the top and bottom of the screen, depending on Aspect

Ratio setting,
_ Cables that do not comply with HDMI standards will not work,
_When an HDMI mini cable is connected, pictures are not displayed on the LCD monitor,

*_The following functions are not available:

[TITLE EDIT], [VIDEO DIVIDE], [TEXT STAMP], [RESIZE], [CROPPING], [LEVELING], [ASPECT

CONV,] [FACE REC EDIT], [COPY], multiple selection (delete, etc,), etc,
_#_HDMI output will be canceled if a USB connection cable is connected simultaneously,

_ No picture output will occur through AV cables connected,
*_When playing motion pictures/still pictures with audio recorded with other devices, video/audio may

not always be played back correctly,
*_Pictures may be momentarily distorted immediately after commencing playback or pausing on

certain televisions,
_Always read your television's operating instructions,
*_Audio output is stereo.

148 VQT2R20ITheDMC-ZS5 does not have an HDMI socket. ]

What is VlERA Link (HDMI)?

_VIERA Link TMis a new name for EZ Sync TM.
_ViERA Link is a function that automatically finks this camera to ViERA Link-

compatible devices by connecting HDM] mini cables (optional) for enabling easy
operation with the VIERA remote control. (Some operations are not available.)

_VIERA Link (HDMI) is an exclusive Panasonic function added to the industry-

standard HDMI control functions known as HDM] CEC (Consumer Electronics
Control). Operation is not guaranteed when connecting with non-Panasonic HDM]
CEC-compatible devices. Refer to your product manual to verify compatibility with
VIERA Link (HDMI).

_This camera supports VIERA Link (HDMI) Version 5. This is the latest Panasonic

standard that also supports previous Panasonic VIERA Link devices. (As of
December 2009)

Preparation: • Set [VIERA Link] to [ON]. (427)

_ onnect the camera to a VIERA Link (HDMI)-compatible

Panasonic television (VlERA) with an HDMI mini cable
(optional) (_148).

Turn on camera

Set REC/PLAY switch to

Perform the following operations with the VIERA remote control

Panasonic TV (VIERA)

IThe DMC-ZS5 does not support VIERA Link.

_g with an HDMI

mini cable (optional)

(Continued on the next page)

1vo 2R20149

Viewing on TV screen (Cont no÷d)

_ Select a picture with A T _1_, and press [OK]

• When operating, refer to the VIERA Link operating panel.
of pictures displayed (switch between them with

the red button)

panel

IlSwitching Playback Mode

You can press [SUB MENU] to switch between Playback Modes.

[NORMAL PLAY[ Plays back all subject pictures.
[SLIDE SHOW] Plays back pictures as a Slide Show.
[GPS AREA PLAY] Plays back pictures for which place name information has been

[TRAVEL PLAY] Plays back pictures for which [TRAVEL DATE] has been set.
[CATEGORY PLAY] Plays back pictures by category,

[CALENDAR] Displays calendar screen and plays back pictures by recording date,
[FAVORITE PLAY] Plays back pictures that have been set as [FAVORITE].

® Refer to camera o

partially.)

recorded, by place name.

)erations for operations and settings. (These may differ

View pictures

I

Operating panel

• The operating panel turns off automatically if it
has not been operated for about 5 seconds. (If

any button is pressed, the panel will be displayed
again.) If you wish to dim the operating panel, press

[RETURN].

• Playback of motion pictures/still pictures with audio

--_ press [OK].

• Slide Show playback _ press the red button.

• Slide Show settings --_ press [SUB MENU].

• To display the picture information _ press A.

• To return to the previous screen _ press _.

150 VQT2R20 IThe DMC-ZS5 does not support VIERA Link. ]

[]Other related operations

®Power OFF

The camera's power can also be switched off when switching the television's power
off with the remote control.

®Automatic input select

• This function automatically switches the television input to the camera screen
whenever the camera's power is switched on while it is connected via the HDMI

mini cable. The television can also be switched on via the camera from Standby
Mode (if 'Power on link' on the television is set to 'on').

• The input setting may not be able to be changed automatically with certain
television HDMI sockets. In this case, please change the input setting with your
television remote control (consult your television operating instructions for details).

• If VIERA Link (HDMI) does not function correctly (4161)

®Do not use any other cables except a genuine Panasonic HDMI mini cable (optional).
®The shape of remote control will differ depending on the country or area where the TV

was purchased.
®Cables that do not comply with HDMI standards will not work.
® if you are unsure whether or not the TV you are using is compatible with VIERA Link,

read the operating instructions for the TV.
® if the [VIERA Link] setting on the camera is [ON], operations via the camera buttons will

be limited.
®Ensure that the television you are connecting to has been set up to enable VIERA Link

(HDMI) (consult your television operating instructions for details).
® if you do not wish to use VIERA Link (HDMI), turn the camera's [VIERA Link] setting

[OFF].
®When operating with VIERA Link, the [HDMI MODE] (427) of the camera is selected

automatically.
®When playing back AVCHD Lite motion pictures on this camera that were recorded with

another camera, the resolution may change automatically, if this happens, the screen

may go dark for a while, but this is not a malfunction.
® if the O tab on the TV screen is selected, it will not be possible to select either

([AVCHD Lite]) F&"<_,or _ ([MOTION JPEG]) in [SLIDE SHOW] [CATEGORY

SELECTION].

VQT2R20 151

List of LCD monitor displays

I 2 3 4 5 14

13-

r i

11, 12 20 19

1 Recording Mode

(_ _31, 108, -_33)

Flash (447)
Recording quality _ (4108)

AF Tracking36, 99)
Wind cut _ (4109)

Macro recording (-_49)

2 AF area (-*37)

Spot AF area (4100)
Spot metering target (4101)

3 Focus (_34)
4 Picture Size (495)

Quatity (--*96)

5 Battery capacity (-_16)
6 Number of recordable pictures

(_ _174, 4176)

7 Save destination (-_16)

8 Recording state

9 Histogram (_46)

10 Travel Date (490)

11 Exposure Compensation (-*53)

Aperture value/Shutter speed (437, 56, 57, 58)
ISO Sensitivity (497)

Intelligent ISO (496)

12

Focus range (_51)
Zoom (_39)/Macro Zoom (450)

21

13 Optical Image Stabilizer (-.105)/

Jitter alert (_37)
Metering Mode (-+101)

Pre AF (-_101)
Burst Mode (-.103)

Auto Bracket (_54)

Multi Aspect (-.55)
I.resolution (441, 103)

Intelligent exposure (_102)
LCD Mode (423)

LCD power save (424)

14 White Balance (--_98)

ISO Sensitivity (-.97)/ISO max (496)
Color effect t4104)

15 Available recording time

(_ _72, _76)
16 GPS_ (484)
17 Self-timer Mode (_52)
18 Elapsed recording time

(_ _72, _76)

19 Minimum shutter speed (-.102)

20 Travel elapsed days

(_ _90, --_91)

Age in years/months (_65, 80)

Destination settings (492)

Place name information (-_84)

Current date/time (_17, 19)

21 Audio recording (_106)
22 AF Assist Lamp (4106)

152 vQT2R20

Press the [DISPLAY] button to change display (-_46).

1 2 3

11

1 Playback Mode (-_118)

Protected picture (--_135)
Favorites (-_ 133)

Text stamped display (--_128)

2 Picture size (_95)

Quality (--*96)
3 Battery capacity (--_16)
4 Folder/File number (425, 44, 142)

Picture number/Total pictures (_44)

Motion picture recording time/
Elapsed playback time (_115)

Save destination (_16)

5 GPS _ (_84)

Histogram (--_46)
Recording information

6 Favorites settings (--_133)

7 Recorded date and time

Place name information _ (_84)
Destination s (--_92)

Name _ (-,65, 78)
Title _ (--_126)

8 Destination settings (_93)

@Travel elapsed days (--*90)
10 LCD Mode (--_23)
11 Color effect (--_104)
12 Quantity of pictures to print (--_134)

13 Motion pictures/Still picture with audio (--_115)

Cable disconnection warning icon (--_144)

The order of priority for display is location
name information, title, destination, name

([BABY[/[PET[), name ([FACE RECOG.]).

Screens shown here are only examples. The actual display may vary.

VQT2R20 153

Message displays

*_A MultiMediaCard was inserted.

Not compatible with the camera. Use a compatible card.

® Unlock the write-protect switch on the card. (-.16)

_ Take pictures, or insert a different card already containing pictures.

_ Release the protection before deleting, etc. (-.135)

*_ Non-DCF pictures (_44) cannot be deleted.

Save needed data on a computer or other device, and then use ]FORMAT] on the camera to
erase the card. (-*28)

® The number of pictures that can be deleted at once has been exceeded.
® More than 999 pictures have been set as favorites. (Other than AVCHD kite motion pictures F_)
*_The number of pictures allowing [TITLE EDIT], [TEXT STAMP] or [RESIZE] (multiple settings) at

once has been exceeded.

® [PRINT SET], [TITLE EDIT1, or [TEXT STAMP] cannot be made for non-DCF pictures (-_44).

*_The lens is not working correctly.

--_Turn on power again.

(Consult the dealer or your nearest Service Center if display still remains)

® Pictures cannot be copied in following cases.

Picture of same name already exists in built-in memory when copying from card.
File is not of DCF standard.
Picture taken or edited on a different device.

*_There isno space lefton the built-inmemory orthe card.When you copy picturesfromthe built-in

memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.

*_ Displayed when formatting built-in memory via computer, etc.

Reformat directly using camera. Data will be deleted.

® The card format cannot be used with this camera.

Save needed data on a computer or other device, and then use ]FORMAT] on the camera. (-*28)

N

® Access to card has failed.

Insert card again.

® Try with a different card.

154 VOT R 0

® Card is not of SD standard.
*_When cards in capacities of 4 GB or more are used, only SDHC or SDXC memory cards are

supported.

_ Data read has failed.

--, Chock whether card has been inserted correctly (--,14).

_ Data write has failed.

--, Turn off power and remove card, before re-inserting and turning on power again.

_, Card may possibly be damaged.

®_Try with a different card.

_ A card that has been used in another camera to record an AVCHD motion picture in a different

broadcast system cannot be used to record AVCHD Lite motion pictures with this camera.

-_ Format the card with this camera. The data wil{ be deleted.

*_Using a card of SD speed 'Class 4'_ or above is recommended for recording motion pictures in

[AVCHD Lite(GPS REC)]/[AVCHD Lite].
Using a card of SD speed 'Class 6'_ or above is recommended for recording motion pictures in

'MOTION JPEG'.

The SD speed class is a speed rating for continuous writing.

*_If recording stops even when using the card above, the data writing speed is low. We recommend

backing up the data on the memory card and reformatting it (--_28).

® Motion picture recording may be automatically terminated with certain cards.

*_Folder numbers in use have reached 999.

-+ Save all necessary data to computer (or other device), and [FORMAT] (-_28).
Folder number is reset to 100 when performing [NO.RESET] (-*25).

_ AV cable is connected to camera.

--, To remove message immediately _ Press [MENU/SETI.

--, To change aspect ratio _ Change [TV ASPECT] (_26).

_ USB connection cable is only connected to camera.

-_ Message disappears when cable is also connected to another device.

AT

® Use a genuine Panasonic battery.
*_Battery cannot be recognized as terminal is dirty.

-_ Wipe any dirt away from the battery terminal.

® The battery level is low.

-_ Charge the battery before use. (--11)

_ GPS may not work in China or in the border regions of countries neighboring China. (Current as of

February 2010)

VOT2R20155

Q&A Troubleshooting

Camera does not work even if power is turned on.
*_ Battery is not inserted correctly (_14), or needs recharging.

LCD monitor shuts off even if power is turned on.
*_ [SLEEP MODE] is activated. (_24)

Press shutter button halfway to release.

_ Battery needs recharging.
Camera switches off as soon as power is turned on,

® Battery needs recharging.
_ Camera is set to [SLEEP MODE]. (_24)

Press shutter button halfway to release.

This unit is turned off automatically.
_ If you connect to a TV compatible with VIERA Link with an HDMI mini cable (optional) and turn off

the power on the TV with the remote control for the TV, the power on this unit also turns off.

If you are not using VIERA Link, set [VIERA Link] to [OFF]. (_27)

Cannot perform positioning.
_ When tOPS SETTING] is set to [OFF]. (_85)
_ Depending on the recording environment, such as when indoors or near buildings, it may not be

possible to correctly receive the signals from the GPS satellites. (_84)

When using the GPS, we recommend holding the camera still for a while with the GPS antenna
facing upward in an outdoor location where you can see the entire sky.

The status indicator flashes while the camera's power is off.
® tOPS SETTING] is [ON].

*_When turning off the camera's power in an airplane, hospital or other restricted area, set tOPS

SETTING] to [OFF] or Ks.

Positioning takes time,
_ When using the camera for the first time or after not using it for a while, positioning may take several

minutes.

_ Positioning usually takes less than two minutes, but because the positions of the GPS satellites

change, it may take longer depending on the recording location and environment.

_ Positioning will take time in environments where it is difficult to receive the signals from the GPS

satellites. (_84)

The location name information is different from the recording location.
® Immediately after the camera's power is turned on or when the GPS icon is something other than

_, the location name information that is recorded in the camera may vary significantly from the

current position.

_ When _ is displayed for the location name information, the information can be changed to a

different candidate before starting to record. (_87)

The location name information is not displayed.
® "- - -" is displayed if there is no nearby landmark or other points, or no information registered in the

camera's database. (--_87)

During playback, a location name or other information can be entered with [PLACE-NAME EDIT].
(_127)

156 VQT2R20

Cannot record pictures.

_ REC/PLAY switch is not set to _ (record).
*_Built-in memory/card is full. _ Free space by deleting unwanted pictures (_45).

Cannot record to cards.

*_The card was formatted with a different device.

Please format cards with this camera. (-_28)

*_For details about compatible cards (_16).

Recording capacity is low.

*_Battery needs recharging.

Use a fully charged battery (not sold pre-charged). (_11)

If you leave the camera on, the battery will be exhausted. Turn the camera off frequently by using

[SLEEP MODE] (_24) etc.

*_Please check the recording picture capacity for cards and built-in memory. (_L'4__174, _ 176)

Recorded pictures look white.

*_Lens is dirty (fingerprints, etc.).

-+ Turn on power to extract lens barrel, and clean lens surface with a soft, dry cloth.

*_Lens is foggy (_7).

Recorded pictures are too bright/too dark.

*_Pictures taken in dark locations, or bright subjects (snow, bright conditions, etc.) occupy

most of the screen. (Brightness of LCD monitor may differ from that of actual picture)

Adjust the exposure (--_53).

*_[MIN. SHTR SPEED] is set to fast speeds, e.g. [1/250] (_102).

2-3 pictures are taken when I press the shutter button just once.

*_Camera set to use [AUTO BRACKET] (-.54), [MULTI ASPECT] (_55), [BURST] (_103), or the [HI-

SPEED BURST] (_66) or [FLASH BURST] (_67) Scene Modes.

Focus not aligned correctly.

_ Not set to mode appropriate for distance to subject. (Focus range varies according to Recording Mode.)
_ Subject outside of focus range.
*_Caused by jitter or subject movement (_96, 105).

Recorded pictures are blurred. Optical Image Stabilizer ineffective.

® Shutter speed is slower in dark locations and Optical image Stabilizer is less effective.

Hold camera firmly with both hands, keeping arms close to body.

*_Use a tripod and the self-timer (_52) when using slower shutter speed with [MIN. SHTR SPEED].

Cannot use [AUTO BRACKET] or [MULTI ASPECT].

*_Only enough memory for 2 pictures or fewer.

Recorded pictures appear coarse, or there is interference.

*_ISO Sensitivity is high, or shutter speed is low.

(Default [SENSITIVITY] setting is [AUTO] - interference may appear with indoor pictures.)

Lower [SENSITIVITY] (_97).
Set [NOISE REDUCTION] in [PICT.ADJ.] in the + direction. (_105)

-* Take pictures in brighter locations.

*_Camera set to [HIGH SENS.] or [HI-SPEED BURST] Scene Modes.

(Picture becomes slightly coarser in response to high sensitivity)

Pictures appear dark or have poor coloring.

® Colors may appear unnatural due to the effects of light source.

Use [WHITE BALANCE] to adjust the coloring. (_98)

VOT2R20157

Q&A Troub[eshoot[n 9 (Continued)

Brightness or coloring of recorded picture different from real life.
*_Taking pictures under fluorescent lighting may require a faster shutter speed and result in slightly

changed brightness or coloring, but this is not a fault.

Red banding may appear on the LCB monitor or part or the entire screen
may have a reddish tint, when recording or pressing the shutter button

halfway.
*_This is a characteristic of CCD and may appear if subject contains brighter areas.

Some blurring may occur around these areas, but this is not a fault, This will be
recorded in motion pictures, but not in still pictures,

_aWe recommend keeping the screen away from strong light sources such as sunlight when taking

pictures,

Motion picture recording stops midway.
_ With some cards, access display may appear briefly after recording, and recording may end midway.

*_ Using a card of SD speed 'Class 4 '_or above is recommended for recording motion pictures in

[AVCHD Lite(GPS REC)]/[AVCHD Lite],
Using a card of SD speed 'Class 6'* or above is recommended for recording motion pictures in
'MOTION JPEG',

* The SD speed class is a speed rating for continuous writing,

*_ If recording stops even when using the card above, the data writing speed is low, We recommend

backing up the data on the memory card and reformatting it (--_28),

The subject cannot be locked. (AF track fails)
*_ If the subject has different colors as the periphery, set the AF area to those colors specific to the

subject by aligning that area with the AF area. (--_100)

LCD monitor dims during motion picture recording.
*_ LCD monitor may dim if continuing motion picture recording for long periods.

Brightness is unstable.
® Aperture value is set while shutter button is pressed halfway.

(Does not affect recorded picture.)
Monitor flickers indoors.
® Monitor may flicker after turning on (prevents influence from fluorescent lighting).

Monitor is too bright/too dark.
*_ Camera set to [LCD MODE] (_23).

Black/blue/red/green dots or interference appears. Monitor looks distorted when
touched.

_ This is not a fault, and will not be recorded on the actual pictures, so there is no need to worry.
Date/age is not displayed.

*_ Current date, travel elapsed days (_90), and names and ages in [BABY] and [PET] (--_65) Scene

Modes are only displayed for approx. 5 sec. when the camera is turned on, after these settings

are made, or after switching from Playback Mode to Recording Mode, etc. They cannot be always

displayed.

158 VQT2R20

No flash emitted.

® Flash set to [FORCED FLASH OFF] [] (--_47).
® When set to [AUTO] _'_m, flash may not be emitted in certain conditions.
*_Flash cannot be emitted in the [SCENERY], [PANORAMAASSIST], [NIGHT SCENERY], [SUNSET],

[HI-SPEED BURST], [STARRY SKY], [FIREWORKS], and [AERIAL PHOTO] Scene Modes, or when
using [AUTO BRACKET] or [BURST].

*_No flash is emitted when recording a motion picture.

Multiple flashes are emitted.

® Red-eye reduction is active (_47). (Flashes twice to prevent eyes appearing red.)
*_The Scene Mode is set to [FLASH BURST].

Pictures have been rotated.

*_[ROTATE DISP.] is set to [ON].

(Automatically rotates pictures from portrait to landscape. Some pictures taken facing up or facing
down may be interpreted as being portrait.)

--_ Set [ROTATE DISP.] to [OFF].(--_132)

Cannot view pictures. There are no recorded pictures.

® REC/PLAY switch is not set to (_ (play).
® No pictures in built-in memory or card (pictures played from card if inserted, from built-in memory if

not).

® The Playback Mode has been changed.

--_ Set Playback Mode to [NORMAL PLAY] (_118).

Folder/file number displayed as [=]. Picture is black.

® Picture edited on computer or taken on different device.
® Battery removed immediately after picture taken, or picture taken with low battery.

--_ Use [FORMAT] to delete (_28).

incorrect date displayed in Calendar Playback.

® Picture edited on computer or taken on different device.
*_[CLOCK SET] is incorrect (_17, 19).

(incorrect date may be displayed in Calendar Playback on pictures copied to computer and then
back to camera, if computer and camera dates differ.)

Depending on the subject, an interference fringe may appear on the screen.

® This is called moire. This is not a malfunction.

White round spots like soap bubbles appear on the recorded picture.

*_If you take a picture with the flash in a dark place or indoors, white round spots may

appear on the picture caused by the flash reflecting particles of dust in the air. This is
not a fault. A characteristic of this is that the number of round spots and their position

differ in every picture.

[THUMBNAIL IS DISPLAYED] is shown on the screen.

*_The pictures may have been recorded on another device. If so, they may be displayed with poor

picture quality.

VOT2R20159

Q&A TrouMeshooting (Continued)

Blacken red areas of recorded pictures.
*_When digital red-eye correction (_, _, _) is operating, if a subject is recorded that has

skin-colored areas with red areas inside, the digital red-eye correction function may blacken the red

areas.

We recommend setting the flash to 2, m or [], or [RED-EYE REMOVAL] to [OFF] before
recording.

Sounds of camera operations will be recorded in motion pictures.
*_ Camera operation sounds may be recorded as camera automatically adjusts lens aperture during

motion picture recording; this is not a fault.
Motion pictures still and pictures with audio taken by this camera cannot be played in

other cameras.
_ Motion pictures and pictures with audio taken with this camera may not always be able to be

played back with cameras by other manufacturers. Playback may also not be possible with certain

Panasonic digital cameras (LUMIX)._ _

Cameras launched before December 2008, and some cameras launched in 2009 (FS, LS Series).

_ Motion pictures recorded in [AVCHD Lite] _ format cannot be played in devices that do not support

AVCHD. In some cases, motion pictures cannot be played back correctly in AVCHD-compatible

devices.

Motion pictures recorded in [AVCHD Lite(GPS REC)] cannot be played back with Panasonic digital
cameras (LUMIX) compatible with AVCHD (Lite) recording that were sold in or before 2009.

_ In some cases, motion pictures and pictures with audio taken by this camera cannot be played

back by digital cameras from other companies, and they also cannot be played in Panasonic digital

cameras (LUMIX) that were sold before July 2008.

No image appears on ]V, image blurred or not colored.
_ Not connected correctly (_147, 148).

_,The television has not been switched to auxiliary input.
_ The television does not support the type of card used.

*_ Check the [VIDEO OUT] setting (NTSC/PAL) on the camera. (DMC-ZS5PU only.) (--_26)
TV screen display different to LCB monitor.

_ Aspect ratio may be incorrect or edges may be cut off with certain televisions.
Cannot play motion pictures on TV.

_ Card is inserted into TV.

Connect with AV cable (supplied) or HDMI mini cable (optional) _ and play on camera
(_147, 148).

Picture is not displayed on full TV screen,
_ Check [TV ASPECT] settings (--_26).

160 VQT2R2o

VlERA Link (HDMI) is not working. F4L'4_

*_Is the HDMI mini cable (optional) connected correctly? (-_148)

--_ Check that the HDMI mini cable (optional) is fully inserted.

*_Is the camera's [VlERA Link] setting set to [ON]? (--_27)

--_ The input setting may not be able to be changed automatically with certain television HDMI
sockets. In this case, please change the input setting with your television's remote control

(consult your television's operating instructions for details).

--_ Check the VlERA Link (HDMI) settings on the device you are connecting to.

--_ Turn the camera's power off and on again.

--_ Turn the 'VlERA Link control (HDMI device control)' setting on your television (VlERA) to 'off', and
then to 'on' again. (Consult your VlERA's operating instructions for details.)

Cannot send pictures to computer.

_,Not connected correctly (_141).
® Check whether computer has recognized camera.

*_Set [USB MODE] to [PC] (--_26).

Computer does not recognize card (only reads built-in memory).

® Disconnect USB connection cable and reconnect with card in place.
® Set mode dial to any except [_.

Computer does not recognize card. (When using an SDXC memory card)

--_ Check whether your computer is compatible with SDXC memory cards.
http:l/panasonic.netlavc/sdcardlinformationlSDXC.html

--_ A message prompting you to format the card may appear when you connect it. Do not format the
card.

--_ If the [ACCESS] indicator on the LCD monitor does not go off, turn off the camera's power before
disconnecting the USB connection cable.

I want to play computer pictures on my camera.

® Use the supplied software 'PHOTOfunSTUDIO' to copy pictures from computer to camera.
® To save to clipboard, use software to copy from computer to card, then copy to clipboard folder with

[COPY] (--_137)in [PLAYBACK] menu.

Cannot print when connecting to printer.

® Printer not compatible with PictBridge.
*_Set [USB MODE] to [PictBridge (PTP)] (_26).

Cannot get the date printing.

® Make date printing settings before printing.

--_ In shop: Make [PRINT SET] settings (--_134), and request printing 'with dates'.

--_ With printer: Make [PRINT SET] settings, and use a printer compatible with date printing.

--_ With supplied software: Select 'with dates' within print settings.

*_Use [TEXT STAMP] before printing (--_128).

Edges cut off pictures when printing.

® Release any trimming or edgeless printing settings on printer before printing.

(Consult printer operating manual.)

*_The pictures were recorded in _ aspect ratio.

--_ If printing in shop, check if 16:9 sizes can be printed.

VOT2R20161

Q&A T ooMo hoot °g(Co.t °ood)

Menu not displayed in desired language.
@Change [LANGUAGE] setting (_28).

Camera rattles if shaken.
@This sound is made by the lens movement and is not a fault.

Cannot set [AUTO REVIEW].
@Cannot be set when any of the following are in use: [AUTO BRACKET], [MULTI ASPECT], [BURST],

[SELF PORTRAIT], [HI-SPEED BURST], and [FLASH BURST] Scene Modes, and [AUDIO REC.].

Red lamp illuminated when pressing shutter button halfway in dark locations.
@[AF ASSIST LAMP] set to [ON] (7106).

AF Assist Lamp is not illuminated.
@[AF ASSIST LAMP] is set to [OFF].
@Not illuminated in bright locations or when using [SELF PORTRAIT], [SCENERY], [NIGHT

SCENERY], [SUNSET], [FIREWORKS], [AERIAL PHOTO], or [UNDERWATER] Scene Modes.
Camera is hot.
@Camera may become a little warm during use, but this does not affect performance or quality.

Lens makes a clicking noise.
@When brightness changes, the lens may make a clicking noise and the monitor brightness may also

change, but this is due to aperture settings being made.

(Does not affect recording.)
Clock is incorrect.

@Camera has been left for a long period.

Reset the Clock (717, 19).

@Long time was taken to set Clock (Clock behind by this amount).

When using zoom, picture becomes slightly warped and the edges of the subject

become colored.
@Pictures may be slightly warped or colored around the edges, depending on the zoom ratio, but this

is not a fault.
Zoom movement stops momentarily

@The zoom movement stops momentarily during Extended Optical Zoom and i.Zoom operation, but

this is not a malfunction.

Zoom does not reach the maximum ratio
@If the zoom ratio stops at 3 ×, [MACRO ZOOM] has been set. (_50)

File numbers are not recorded in sequence.
@File numbers are reset when new folders are created (_142).

File numbers have jumped backwards.
@Battery was removed/inserted with power on.

(Numbers may jump backwards if folder/file numbers are not correctly recorded.)

162 VQT2R20

® Camera may become warm if used for long periods of time, but this is not a fault.
*_To avoid jitter, use a tripod and place in a stable location.

(Especially when using telescopic zoom, lower shutter speeds, or self-timer)

*_Keep the camera as far away as possible from electromagnetic equipment (such as

microwave ovens, TVs, video games etc.}.

. If you use the camera on top of or near a TV, the pictures and sound on the camera may be

disrupted by electromagnetic wave radiation.

. Do not use the camera near cell phones because doing so may result in noise adversely affecting

the pictures and sound.

. Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created

by speakers or large motors.

. Electromagnetic wave radiation generated by microprocessors may adversely affect the camera,

disturbing the pictures and sound.

. If the camera is adversely affected by electromagnetic equipment and stops functioning properly,

turn the camera off and remove the battery or disconnect AC adaptor (optional). Then reinsert the
battery or reconnect AC adaptor and turn the camera on.

Do not use the camera near radio transmitters or high-voltage lines.

. If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may

be adversely affected.

® Do not extend the supplied cord or cable.
*_Do not allow camera to come into contact with pesticides or volatile substances (can cause surface

damage or coating to peel).

*_Never leave the camera and the battery in a car or on a car hood in the summer.

It may cause leakage of the battery electrolyte, a generation of heat, and may cause a fire and the
battery to burst due to the high temperature.

To clean your camera, remove the battery or disconnect the power plug from the outlet, and wipe with
a soft, dry cloth.

® Use a damp cloth to remove stubborn stains, before wiping with a dry cloth.
*_Do not use benzene, thinners, alcohol, or kitchen detergent, as these may damage the outer casing

and finish of the camera.

® If using a chemically-treated cloth, read the supplied instructions carefully.
*_Do not touch the lens barrier.

*_Turn off camera power before removing battery and card (ensure that battery is removed to prevent

damage through over-discharge).

® Do not leave in contact with rubber or plastic bags.
*_Store together with a drying agent (silica gel) if leaving in drawer, etc. Store batteries in cool (15 °C -

25 °C (59 °F - 77 °F)) places with low humidity (40 % - 60 %) and no major temperature changes.

*_Charge battery once per year and use completely before storing again.

VO 2R20163

Usage cautions and notes (Continued)

*_To prevent damage to cards and data

. Avoid high temperatures, direct sunlight, electromagnetic waves, and static electricity.
. Do not bend, drop, or expose to strong impacts.
. Do not touch connectors on reverse of card or allow them to become dirty or wet.

*_When disposing of/transferring memory cards

° If using the 'format' or 'delete' functions on your camera or computer, this only changes the file

management information, and does not completely delete the data from within the memory card.
When disposing of or transferring your memory cards, we recommend physically destroying the

memory card itself, or using commercially available computer data erasing software to completely
delete the data from the card. Data within memory cards should be managed responsibly.

® Do not press hard on the LCD monitor. This may cause uneven display and damage the monitor.
® In cold climates or other situations when the camera becomes cold, the LCD monitor may be slightly

less responsive than normal immediately after startup. Normal brightness will return once the

internal components have warmed up.

If names or birthdays are set in [BABY] Mode or in the [FACE RECOG.] function,
personal information will be included in the camera and the pictures that have been taken.

®Disclaimer

° Data containing personal information can be altered or lost due to malfunction, static electricity,

accidents, breakdowns, repairs, or other operations.
Panasonic will not be liable for any damage that occurs, direct or indirect, as a result of the

alteration or loss of data containing personal information.

*_When ordering repairs or transferring/disposing of the camera

° To protect your personal information, please reset the settings. (-*26)
° If any pictures are contained in the built-in memory, copy (_137) them to a memory card if

necessary, and then format (_28) the built-in memory.

° Remove the memory card from the camera.
° When ordering repairs, the built-in memory and other settings may be returned to the initial

purchase state.

° If the above operations cannot be performed because of a camera malfunction, consult with the

dealer or nearest Service Center.

When transferring or disposing of your memory card, see 'When disposing of/transferring

memory cards' in the previous section.

164 vQT2R20

Important! Be sure to read the following
before using the location names that
are stored in this product.

Personal Use Onlv.
You agree to use this Data together with
this digital camera for the solely personal,
non-commercial purposes for which you
were licensed, and not for service bureau,
time-sharing or other similar purposes.
Accordingly, but subject to the restrictions
set forth in the following paragraphs, you
may copy this Data only as necessary for
your personal use to (i) view it, and (ii)
save it, provided that you do not remove
any copyright notices that appear and
do not modify the Data in any way. You
agree not to otherwise reproduce, copy,
modify, decompile, disassemble or reverse
engineer any portion of this Data, and
may not transfer or distribute it in any
form, for any purpose, except to the extent
permitted by mandatory laws. Multi-disc
sets may only be transferred or sold as a
complete set as provided by Panasonic
Corporation and not as a subset thereof.

Restrictions.
Except where you have been specifically

licensed to do so by Panasonic
Corporation, and without limiting the
preceding paragraph, you may not (a)
use this Data with any products, systems,

or applications installed or otherwise
connected to or in communication

with vehicles, capable of vehicle

navigation, positioning, dispatch, real
time route guidance, fleet management
or similar applications; or (b) with or

in communication with any positioning
devices or any mobile or wireless-
connected electronic or computer devices,

including without limitation cellular phones,

palmtop and handheld computers, pagers,
and personal digital assistants or PDAs.

Warnin&
The Data may contain inaccurate or

incomplete information due to the

passage of time, changing circumstances,
sources used and the nature of collecting
comprehensive geographic data, any of
which may lead to incorrect results.

VQT2R20 165

Usage cautions and notes (Continued)

No Warranty_.
This Data is provided to you "as is," and

you agree to use it at your own risk.

Panasonic Corporation and its licensors
(and their licensors and suppliers) make no
guarantees, representations or warranties
of any kind, express or implied, arising
by law or otherwise, including but not
limited to, content, quality, accuracy,
completeness, effectiveness, reliability,

fitness for a particular purpose, usefulness,

use or results to be obtained from this
Data, or that the Data or server will be

uninterrupted or error-free.

Disclaimer of Warrant3L'."
PANASONIC CORPORATION AND

ITS LICENSORS (INCLUDING THEIR
LICENSORS AND SUPPLIERS)

DISCLAIM ANY WARRANTI ES,
EXPRESS OR IMPLIED, OF QUALITY,

PERFORMANCE, MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE
OR NON-INFRINGEMENT. Some States,
Territories and Countries do not allow

certain warranty exclusions, so to that
extent the above exclusion may not apply

to you.

Disclaimer of Liability_:
PANASONIC CORPORATION AND

ITS LICENSORS (INCLUDING THEIR
LICENSORS AND SUPPLIERS) SHALL

NOT BE LIABLE TO YOU: IN RESPECT
OF ANY CLAIM, DEMAND OR ACTION,
IRRESPECTIVE OF THE NATURE OF
THE CAUSE OF THE CLAIM, DEMAND

OR ACTION ALLEGING ANY LOSS,
INJURY OR DAMAGES, DIRECT OR

INDIRECT, WHICH MAY RESULT FROM
THE USE OR POSSESSION OF THE

INFORMATION; OR FOR ANY LOSS OF
PROFIT, REVENUE, CONTRACTS OR

SAVINGS, OR ANY OTHER DIRECT,
INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES ARISING
OUT OF YOUR USE OF OR INABILITY

TO USE THIS INFORMATION, ANY
DEFECT IN THE INFORMATION, OR

THE BREACH OF THESE TERMS
OR CONDITIONS, WHETHER IN AN
ACTION IN CONTRACT OR TORT OR
BASED ON AWARRANTY, EVEN IF
PANASONIC CORPORATION OR ITS
LICENSORS HAVE BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
Some States, Territories and Countries

do not allow certain liability exclusions or
damages limitations, so to that extent the
above may not apply to you.

166 VQT2R20

Export Control.
You agree not to export from anywhere
any part of the Data provided to you or any
direct product thereof except in compliance
with, and with all licenses and approvals

About the geographical coordinate
system
The latitude and longitude standard

(geographical coordinate system) recorded
with this camera is WGS84.

required under, applicable export laws,
rules and regulations.

About copyright
According to copyright law, the map data

Entire Aqreement.
These terms and conditions constitute

the entire agreement between Panasonic

stored in this camera may not be used for

purposes other than personal use without
the permission of the copyright holder.

Corporation (and its licensors, including
their licensors and suppliers) and you
pertaining to the subject matter hereof,
and supersedes in their entirety any and

About navigation functions
This camera is not equipped with a

navigation function.

all written or oral agreements previously
existing between us with respect to such
subject matter.

Notices related to licensed software copyright holders

© 2009 NAVTEQ. All right reserved.

This service uses POI (Points Of Interest) of ZENRIN CO., LTD.
"POWERED BY ZENRIN" is a trademark of ZENRIN CO., LTD.

© 2010 ZENRIN CO., LTD. All rights reserved.

© Her Majesty the Queen in Right of Canada, © Queen's Printer for Ontario, © Canada
Post Corporation, GeoBase®, © Department of Natural Resources Canada, © United

States Postal Service® 2009, USPS®, ZIP+4®

VQT2R20 167

Usage cautions and notes (Continued)

Australia Copyright.Based on data providedunder licensefrom PSMAAustralia

Austria © Bundesamt fur Eich- und Vermessungswesen

Croatia, Cyprus, Estoniai © EuroGeographics
Latvia, Lithuania, Moldova,

Poland,
SIovenia and/or Ukraine

France source: Georoute ®IGN France & BD Carto ® IGN France
Germany Die Grundlagendaten wurden mit Genehmigung der zustaendigen

Great Britain Based upon Crown Copyright material.
Greece Copyright Geomatics Ltd.

Hungary Copyright ©2003; Top-Map Ltd.

Norway Copyright © 2000; Norwegian Mapping Authority
Portugal Source: IgeoE - Portugal

Spain Informacion geografica propiedad del CNIG
sweden Based upon electronic data @ National Land Survey Sweden.

switzerland Topografische Grundlage: © Bundesamt for Landestopographie.

Limited (www.psma.com.au).

Behoerden entnommen.

La Banca Dati Italiana e stata prodotta usando quale riferimento anche

cartografia numerica ed al tratto prodotta e fornita dalla Regione
Toscana.

168 VQT2R20

==Countries and regions for which landmarks can be displayed and

recorded

JAPAN Japan
ALBANIA Albania

ARGENTINA Argentina
AUSTRALIA Australia

AUSTRIA Austria
BAHAMAS The Bahamas
BAHRAIN Bahrain
BELGIUM Belgium

BOSNIA Bosnia and
HERZEGOVINA Herzegovina
BRAZIL Brazil

BULGARIA Bulgaria
BELARUS Belarus

CANADA Canada

United States of
America

CHILE Chile
TAIWAN Taiwan

CROATIA Croatia
CZECH REPUBLIC Czech Republic

DENMARK Denmark
ESTONIA Estonia

FINLAND Finland
FRANCE France
MONACO Monaco
ANDORRA Andorra
SPAIN Spain

FRENCH GUIANA French Guiana
GERMANY Germany

GREECE Greece
FRENCH Guadeloupe -

GUADELOUPE France
HONG KONG Hong Kong

HUNGARY Hungary
INDIA India

REPUBLIK INDONESIA Indonesia

IRELAND Republic of Ireland
ITALY Italy

SAN MARINO San Marino

VATICAN CITY STATE Vatican City

KUWAIT Kuwait
LESOTHO Lesotho

LATVIA Latvia
LITHUANIA Lithuania

LUXEMBOURG Luxembourg
MACAU Macao

MALAYSIA Malaysia
BRUNEI Brunei

MartiniqueMARTINIQUE

MEXICO Mexico
MONTENEGRO Montenegro

MOROCCO Morocco
OMAN Oman
NAMIBIA Namibia

NETHERLAND Netherlands
NEW ZEALAND New Zealand

NORWAY Norway
POLAND Poland

PORTUGAL Portugal
QATAR Qatar

REUNION isLAND Reunion
ROMANIA Romania
RUSSIA Russia

SAUDI ARABIA Saudi Arabia
SERBIA Serbia

SINGAPORE Singapore
SLOVAK REPUBLIC Slovakia

SLOVENIA Slovenia
SOUTH AFRICA South Africa
GIBRALTAR Gibraltar
SWEDEN Sweden

VQT2R20169

Usage cautions and notes (continued)

SWITZE RLAN D Switzerland
LIECHTENSTEIN Liechtenstein

THAILAND Thailand

UAE UAE

TURKEY Turkey

UKRAINE Ukraine
MACE DONIA Macedonia

ENGLAND
CHANNEL ISLANDS Channel Islands
ISLE OF MAN Isle of Man
NORTHERN IRELAND Northern Ireland

SCOTLAND Scotland

WALES Wales

Puerto Rico Puerto Rico
US VIRGIN ISLANDS US Virgin Islands

VENEZUELA Venezuela

England

170 VQT R O

==Countries and regions with no landmark information

• Some location name informationis available, such as country name, region name,

and city or town name.

CONGO, DEMOCRATIC Democratic Republic
REPUBLIC of the Congo

RWANDA Rwanda
CONGO, REPUBLIC Republic of the

OF THE Congo
BURUNDI Burundi

CENTRAL AFRICAN Central African
REPUBLIC Republic
TUNISIA Tunisia

EGYPT Egypt
KENYA Kenya

GUINEA-BISSAU Guinea-Bissau
TOGO Togo

BURKINA FASO Burkina Faso
BENIN Benin
MALl Mall

SENEGAL Senegal
GHANA Ghana

COTE D'IVOIRE
(IVORY COAST)

GUINEA Guinea
SIERRA LEONE Sierra Leone
LIBERIA Liberia
CAPE VERDE cape Verde

NIGER Niger
CHAD Chad

NIGERIA Nigeria
CAMEROON Cameroon

GABON Gabon
EQUATORIAL GUINEA Equatorial Guinea

SAO TOME AND Sao Tome and
PRINCIPE Principe
SAINT HELENA Saint Helena

MOZAMBIQUE Mozambique
ANGOLA Angola
MADAGASCAR Madagascar

Ivory Coast

MAYOTTE Mayotte
COMOROS Comoros
MAURITIUS Mauritius

SEYCHELLES Seychelles
MALTA Malta

MONGOLIA Mongolia
ICELAND Iceland
SOUTH KOREA South Korea

VIETNAM Vietnam

LAOS Laos
CAMBODIA Cambodia

KAZAKHSTAN Kazakhstan
BURMA (MYANMAR) Myanmar

NEPAL Nepal
BANGLADESH Bangladesh

BHUTAN Bhutan
SRI LANKA Sri Lanka

MALDIVES Maldives

Svalbard

SVALBARD Archipelago, Jan

Mayen Island
FAROE ISLANDS Faroe Islands
UZBEKISTAN Uzbekistan

TURKMENISTAN Turkmenistan
CYPRUS Cyprus

EAST TIMOR East Timor
GREENLAND Greenland

GUAM Guam
MARSHALL ISLANDS Marshall Islands
NORFOLK ISLAND Norfolk Island

NEW CALEDONIA New Caledonia
NAURU Nauru

PAPUA NEW GUINEA Papua New Guinea
FIJI Fiji

soLOMON ISLANDS Solomon Islands

VQT2R20171

Usage cautions and notes (Continued)

VANUATU Vanuatu

MICRONESIA 'r i
FEDERATED STATES reaerated States 0r
OF

AMERICAN SAMOA American Samoa

COOK ISLANDS Cook Islands
FRENCH POLYNESIA French Polynesia

KIRIBATI Kiribati
NIUE Niue
SAMOA Samoa

TONGA Tonga
WALLIS AND FUTUNA Wallis and Futuna

PHILIPPIN ES Philippines
NORTHERN MARIANA Northern Mariana

ISLANDS Islands
PALAU Palau

TUVALU Tuvalu
TOKELAU Tokelau

URUGUAY Uruguay
FALKLAND ISLANDS Falkland Islands

(ISLAS MALVlNAS) (Malvinas)
BERMUDA Bermuda

CUBA Cuba

JAMAICA Jamaica

HAITI Haiti
DOMINICAN

REPUBLIC

TURKS AND CAICOS Turks and Caicos

ISLANDS Islands
CAYMAN ISLANDS Cayman Islands

COSTA RICA Costa Rica
GUATEMALA Guatemala
HONDURAS Honduras
PANAMA Panama

NICARAGUA Nicaragua
EL SALVADOR El Salvador

BELIZE Belize
PERU Peru

PARAGUAY Paraguay

Micronesia

Dominican Republic

BOLIVIA Bolivia

ECUADOR Ecuador

SAINT PIERRE AND Saint Pierre and
MIQUELON Miquelon

COLOMBIA Colombia
NETHERLANDS Netherlands Antilles

ANTILLES
BARBADOS Barbados
ARUBA Aruba

GUYANA Guyana
SAINT LUCIA Saint Lucia

TRINIDAD AND
TOBAGO Trinidad and Tobago

MONTSERRAT Montserrat
SURINAME Suriname

ANTIGUAAND Antigua and
BARBUDA Barbuda

GRENADA Grenada
SAINT VlNCENTAND Saint Vincent and

THE GRENADINES the Grenadines
ANGUILLA Anguilla

DOMINICA Dominica
SAINT KITTS AND Saint Kitts and Nevis

NEVlS

BRITISH VIRGIN British Virgin Islands

ISLANDS

172 VOT R O

[] Landmark types

The following points of interest, such as tourist spots and public facilities, are displayed
as landmarks.

• Although about 30,000 landmarks are registered for Japan and about 500,000
are registered for countries other than Japan, note that some landmarks are not
registered. (Current as of February 2010. Will not be updated.)

Zoo Botanical garden Aquarium
Amusement park Athletics ground Baseball park
Gymnasium Golf course Famous site, tourist attraction,

Tower Castle, ruins Shrine

Buddhist temple Church Tomb, monument, mound,

Airport, airfield Port Ferry terminal, ship boarding

Leisure park Tourist park Station
Prefectural or state office City or ward office Town or village office
Embassy, consulate Art museum History museum

Other museum Theater

beauty spot

historic site, palace

point

VOT2R20173

Recording pictureftime capacity

®Varies according to [ASPECT RATIO] (496), [PICTURE SIZE] (495), or [QUALITY] (496)

settings.

[ASPECT RATIO[ ' _

[P,CT"RES,ZE[' oo' Zooo

[QUALITY]

Built-in memory

256 MB

512MB

1 GB

' 2 GB

4GB

Memory 8 GB

card

®Varies according to REC MODE] (4108), or [REC QUALITY] (4108) settings.

[REC MODE] ' [AVCHB Lite(GPS REC)[I [AVCRD Lite]

[REC QUALITY] [GSH]/[SH] I [GB]I[H] ! [GL]/[L] '

Built-in memory

Memory 8 GB
card

6 GB

12GB
16 GB

', 24GB
', 32 GB
, 48 GB

' 64 GB

256 MB
512 MB

1 GB
2GB

' 4 GB

6GB

12 GB
16 GB

GB

32GB
48 GB

' 64 GB

2 3
47 70
94 135

190 280
380 560
760 1110

1160 1690
1550 2270
2340 3420
3120 4570

4540 6640
6270 9170
9100 13490

12350 18300

8MEZ 5MEZ 3MEZ 'i OI3MEZ I

3264x2448 2560x1920 2048x1536 640x480

[] _ []

3 5

65 98
130 195
260 390
520 790

1030 1560
1580 2380

2110 3180
3190 4810
4250 6410

6180 9310

8540 12870
12560 18210
17040 24710

3 min
7 min

15 min
30 min

46 min

lh

1 h 34 min

2h
3h

4h
6h
8h

C

3eration is not guaranteed

4 7 8 17

80 140 150 290

155 280 300 580
320 560 600 1160
650 1130 1220 2360

1280 2230 2410 4640

1950 3390 3660 7050
2610 4540 4910 9440
3940 6860 7400 14240
5250 9150 9880 19000

7630 13280 14350 27590

10540 18350 19820 38120
15170 26010 28020 52030
20590 35300 38020 70610

Cannot be used

4 min
9 min

20 min
40 min

lh

1 h 20 min

2h

2 h 40 min

4h

5 h 20 min

8h

10 h 40 min

65 100
1080 1690
2150 3350
4310 6710
8770 12290

17240 24130

26210 36700
35080 49120
52920 74090
70590 98830

102500 143510
141620 198260
182130 182130

247150 247150

1 h 28 min
1 h 54 min

2 h 54 min

[]

7 min

14 min
29 min

12h

16 h_

lh

4h
6h

8h

174 VQT2R20 IFor the DMC-ZS6/DMC-ZS5 (--_176) ]

®When the number of recordable pictures exceeds 99,999, '+99999' is displayed.

11.SM 7.SMEZ 415MEZ 2.SMEZ 0.3MEZ i015M 7MEZ 4.SMEZ 2MEZ 012MEZ

4176×2784 3392x2264 2656x17682048x1360 640x424 4320x2432 3552x2000 2784x1568 1920x1080 640x360

[] In [] In _'I !_ [] In [] In [] In [] In [] Ill [] In [] !_

2 3 3 5 6 11 9 19 70 100 2 3 3 5 6 12 12 25 83 115
47 71 64 99 110 195 170 320 1170 1690 50 75 63 100 115 210 220 420 1380 1900
95 140 125 195 220 390 330 640 2320 3350 100 150 125 200 230 420 440 830 2740 3770

190 280 250 390 450 790 670 1280 4640 6710 200 300 250 400 470 850 880 1670 5490 7550

390 570 520 800 930 1610 1360 2560 8770 12290 400 610 520 820 950 1700 1800 3410 1024015360

760 1130 1030 1580 1820 3170 2680 5020 1724024130 800 1200 1020 1630 1880 3350 3540 6700 2011030170
1160 1730 1560 2410 2770 4820 4070 7640 26210367001220 1830 1550 2470 2860 5090 5390 101903058045870
1560 2310 2090 3230 3720 6460 5450 1023035080491201630 2450 2080 3310 3830 6820 7220 136404093061400

2350 3490 3160 4870 5610 9740 8230 1543052920740902460 3700 3130 5000 5780 1029010898205806174092610
3140 4660 4220 6500 7480 13000109802059070590988303290 4940 4180 6670 7720 13720145382745082360123540

4560 6760 6130 9440 108701888015940298901025001435104780 7170 6080 9690 11210199302110839860119590179380
6310 9350 8470 13040150102608022020413001418201982606600 9910 8400 1339015480275302915855070165220247830
9100 134981214019170214203642030350607101821301821309580 14570121401917022760404704047872850182130364270
12350183081647026010290704943041190823802471502471501300019770164702601030890549205492898860247150494310

' [MOTION JPEG] ®A maximum of approx. 2 GB of

[HD] [WVGA] [VGA] [QVGA]

-- -- -- 24 s

59 s 2 min 30 s 2 min 35 s 7 min 20 s

2min 5min 5min 10s 14min40s
4min 10min10s 10min40s 29min30s

8min20s 20min50s 21min40s lh

16min20s 41min 42min40s 1h58min

25min lh2min lh5min 3h

33min30s lh23min 1h27min 4hlmin
50 min 30 s 2 h 6 min 2 h 11 min 6 h 4 min

1 h 7 min 2 h 48 min 2 h 55 min 8 h 5 min

1 h 38min 4h4min 4h 14min 11 h45 min

2h15min 5h38min 5h51min 16h14min
3h19min 8h17min 8h37min 23h52min
4h30min 11h14min 11h41min 32h23min

* However, note that the maximum continuous time is

13 hours, 3 minutes and 20 seconds.

continuous motion picture can be
recorded in [MOTION JPEG] format.
(Even if there is more than 2 GB
of available space on the card, the
available recording time will be
calculated for a maximum of 2 GB.)
The time displayed in the table is the

total time.

VQT2R20 175

Recording pictureftime capacity

®Varies according to [ASPECT RATIO] (496), [PICTURE SIZE] (495), or [QUALITY] (496)

settings.

[ASPECT RATIO[ ' _

[P,CT"RES,ZE[' oo' Zooo

[QUALITY] _ []

Built-in memory 8 12

256 MB 47 70
512 MB 94 135

' 1 GB 190 280

GB 380 560

' 4 GB 760 1110

Memory 8 GB 1550 2270

card

®Varies according to REC QUALITY] (477) setting.

GB 1160 1690

12GB 2340 3420
16 GB 3120 4570

', 24GB 4540 6640
', 32 GB 6270 9170

m

, 48 GB 9100 13490
' 64 GB 12350 18300

8MEZ 5MEZ 3MEZ 'i OI3MEZ I

3264×2448 2560x1920 2048x1536 640x480

[] _ [] _ []

11 17 14 25 27 53 195

65 98
130 195
260 390
520 790

1030 1560
1580 2380

2110 3180
3190 4810
4250 6410

6180 9310

8540 12870
12560 18210
17040 24710

80 140 150 290

160 280 300 580
320 560 600 1160
650 1130 1220 2360

1280 2230 2410 4640

1950 3390 3660 7050
2610 4540 4910 9440
3940 6860 7400 14240
5250 9150 9880 19000

7630 13280 14350 27590

10540 18350 19820 38120
15170 26010 28020 52030
20590 35300 38020 70610

[]

1080 1690
2150 3350
4310 6710
8780 12290

17240 24130

26210 36700
35080 49120
52920 74090
70590 98840

102500 143510
141620 198270
182140 182140

247160 247160

310

[REC QUALITY]

Built-in memory

Memory 8 GB
card

256 MB
512 MB

i 1 GB

2GB
4 GB

6 GB

12 GB
16 GB

GB
GB

32

GB

48

GB

' 64

[HD]

59s
2 rain
4 rain

8 min 20 s

16 min 20 s

25 min

33 min 30 s
50 min 30 s

1 h 7 min
1 h 38 min
2 h 15 min

3 h 19 min
4 h 30 min

[WVGA[

2 min 30 s

10 min 10 s

20 min 50 s

41 min

1 h2min

1 h 23 min

2 h 6 min

2 h 48 min

4 h 4 min

5 h 38 min
8 h 17 min

11 h 14 min

5 min

[VGA]

2 min 35 s
5 min 10 s

10 min 40 s
21 rain 40 s

42 rain 40 s

1 h5min

1 h 27 min

2 h 11 min

2 h 55 min
4 h 14 min
5 h 51 min

8 h 37 min

11 h 41 min

[QVGA] '

1 min 19 s
7 min 20 s

14 min 40 s

29 min 30 s

lh

1 h 58 min

3h

4 h 1 min
6 h 4 min

8 h 5 min

11 h 45 min

16 h 14 min
23 h 52 min

32 h 23 min

176 VQT2R20 IForthe DMC-ZS7 (-_174) ]

®When the number of recordable pictures exceeds 99,999,'+99999'is displayed.

11.5M 7.5MEZ 415MEZ 2.5MEZ O.3MEZ i015M 7MEZ 4.SMEZ 2MEZ &2MEZ

4176×2784 3392×2264 2656x17682048x1360 640×424 4320x2432 3552x2000 2784x1568 1920×1080 640x360

[] In [] In [] !_ [] In [] In [] In [] In [] In [] In [] !_

8 12 11 17 20 36 30 58 210 310 8 13 11 18 21 38 40 77 250 340
47 71 64 99 110 195 170 320 1170 1690 50 75 63 100 115 210 220 420 1380 1900
95 140 125 195 220 390 330 640 2320 3350 100 150 125 200 230 420 440 830 2740 3770

190 280 250 390 450 790 670 1280 4640 6710 200 300 250 400 470 850 880 1670 5490 7550
390 570 520 800 930 1610 1360 2560 8780 12290 400 610 520 820 950 1700 1800 3410 1024015360
760 1130 1030 1580 1820 3170 2680 5020 1724024130 800 1200 1020 1630 1880 3350 3540 6700 2011030170

1160 1730 1560 2410 2770 4820 4070 7640 26210367001220 1830 1550 2470 2860 5090 5390 101903058045870
1560 2310 2090 3230 3720 6460 5450 1023035080491201630 2450 2080 3310 3830 6820 7220 136404093061400
2350 3490 3160 4870 5610 9740 8230 1543052920740902460 3700 3130 5000 5780 1029010898205806174092620
3140 4660 4220 6500 7480 13000109802059070600988403290 4940 4180 6670 7720 13720145382745082360123550

4560 6760 6130 9440 108701888015940298901025001435104780 7170 6080 9690 11210199302110839860119590179390
6310 9350 8470 13040150102608022020413001418201982706600 9910 8400 1339015480275302915855070165220247830
9100 134981214019170214203642030350607101821401821409580 14570121401917022760404704047872850182140364280
12350183081647026010290704943041190823802471802471801300019770164702601030890549205492898860247160494330

, ®A maximum of approx. 2 GB of

[HD] [WVGA] [VGA] [QVGA'I

-- -- -- 1 min 24 s

59 s 2 min 35 s 2 min 40 s 7 min 50 s
2min 5min 10s 5min20s 15min40s
4min 10min20s 10min50s 31min20s

8min20s 21min20s 22min 10s lh3min
16min30s 41min50s 43min40s 2h5min
25min10s 1 h3min 1 h6min 3h 11min

33 min40 s lh 25min 1h28min 4h 15min
50min50s 2h8min 2h 14min 6h26min

lh8min 2h52min 2h59min 8h35min

1h38min 4h9min 4h 19min 12h27min

2h 16min 5h45min 5h59min 17h13min
3h20min 8h27min 8h48min 25h18min

4h32min 11h28min 11h56min 34h21min

continuous motion picture can be
recorded. (Even if there is more than
2 GB of available space on the card,
the available recording time will be
calculated for a maximum of 2 GB.)
The time displayed in the table is the

total time.

VQT2R20 177

HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other

countries.
HDAVI Control TM is a trademark of Panasonic

['1"! DOLBY

DIGITAL ]

STEREOCREATOR

Corporation.
"AVCHD", "AVCHD Lite" and "AVCHD", "AVCHD Lite"

logo are trademarks of Panasonic Corporation and Sony
Corporation.

Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

o

QuickTime

For DMC-Z:S7 users

This product is licensed under the AVC patent portfolio license for the personal and

noncommercial use of a consumer to (i) encode video in compliance with the AVC Standard
("AVC Video") and/or (ii) decode AVC Video that was encoded by a consumer engaged in a

personal and non-commercial activity and/or was obtained from a video provider licensed

to provide AVC Video. No license is granted or shall be implied for any other use. Additional

information may be obtained from MPEG LA, LLC.
See http://www.mpeg a.com.

SDXC Logo is a trademark of SD-3C, LLC.

o

QuickTime and the QuickTime logo are trademarks or
registered trademarks of Apple Inc., used under license

therefrom.

• Other names, company names, and product names
printed in these instructions are trademarks or registered
trademarks of the companies concerned.

All descriptions and Iogos pertaining to AVCHD, AVCHD Lite and Dolby pertain to

DMC-ZS7 only.

All descriptions and Iogos pertaining to HDMI and VlERA Link pertain to DMC-ZS7
and DMC-ZS6 only.