Keep the camera away from excessive vibration, force,
or pressure.
Avoid using the camera under the following conditions,
●
which may damage the lens, LCD monitor, or camera
body. This may also cause the camera to malfunction or
prevent recording.
• Dropping or hitting the camera against a hard surface
• Sitting down with the camera in your pants pocket or
forcing it into a full bag
• Adding accessories to the camera strap
• Pushing with excessive force on the lens or LCD monitor
The camera is not dust resistant, splash resistant, or
waterproof.
Avoid using the camera in places with excessive dust
or sand, or where water can come into contact with the
camera.
Avoid using the camera under the following conditions,
●
which present a risk that sand, water, or foreign material
may enter the camera through the lens or openings around
buttons. Be especially careful, because these conditions
may damage the camera and such damage may not be
repairable.
• In extremely dusty or sandy places
• In the rain or by the shore, where the camera may be
exposed to water
■
Condensation (When the lens or the LCD monitor is fogged up)
Condensation may occur when the camera is exposed to
●
sudden changes of temperature or humidity. Avoid these
conditions, which may make the lens or LCD monitor dirty,
cause mold, or damage the camera.
If condensation does occur, turn off the camera and wait
●
about two hours before using it. Once the camera adjusts
to the surrounding temperature, the fogging will clear
naturally.
- 4 -
Before use
■
Always take a test shot first
Before important events when you will use the camera (at weddings, for example),
always take a test shot to make sure that pictures and sound record correctly.
■
No compensation for missed shots
We cannot compensate for missed shots if technical problems with the camera or card
prevent recording.
■
Carefully observe copyright laws
Unauthorized use of recordings which contain works with copyright for purposes other
than personal use is prohibited under copyright law. Recording of certain material may
be restricted even for the purpose of personal use.
■
Also refer to “Usage cautions and notes” (→98)
Please note that the actual controls and components, menu items, and other
●
information for your digital camera may differ from those in the illustrations and screens
provided in this manual. When operation or other information is more or less the same
between models, DMC-FH6 is used as examples for the instructions provided in this
manual.
The operations, procedures, or functions that differ among models are indicated
●
separately, together with the relevant model number.
(Example)
Recording mode icons
●
DMC-FH6
DMC-S2
Recording mode:
Available recording modesUnavailable recording modes
- 5 -
Standard Accessories
Check that all the accessories are supplied before using the camera.
The accessories and their shape will differ depending on the country or area where the
●
camera was purchased.
For details on the accessories, refer to Basic Owner’s Manual.
Battery Pack is indicated as battery pack or battery in the text.
●
Battery Charger is indicated as battery charger or charger in the text.
●
SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card
●
in the text.
Please dispose of all packaging appropriately.
●
Keep small parts in a safe place out of the reach of children.
●
■
Optional accessories
• Cards are optional. You can record or play back pictures on the built-in memory
when you are not using a card. (→14)
• If any accessories are lost, customers in the USA and Puerto Rico should contact
Panasonic’s parts department at 1-800-833-9626 and customers in Canada should
contact 1-800-99-LUMIX (1-800-995-8649) for further information about obtaining
replacement parts.
We recommend using
the supplied hand strap
to avoid dropping the
camera.
For dealer display purpose only
• When using an AC adaptor, ensure that the Panasonic DC coupler (for dealer
display purpose only) and AC adaptor (for dealer display purpose only) are used.
20 Card/Battery door (→12)
- 8 -
Names and Functions of Main Parts
Cursor button
[MENU/SET]
(menu display/set) (→33)
Left cursor button ( )
• Self-timer (→47)
Down cursor button ( )
• Changing information display
In this manual, the button that is used is shaded or indicated by .
●
Up cursor button ( )
• Exposure Compensation (→48)
Right cursor button ( )
• Flash (→45)
The illustrations and screens in this manual may differ from the actual product.
●
Do not block the microphone when recording motion pictures.
●
Some tripods or unipods, and some methods of holding the camera may block the
●
speaker, making it difficult to hear the beep, etc.
- 9 -
Charging battery
Charging light
([CHARGE])
On: Charging in progress
(approx. 120 min. if fully
depleted)
Off: Charging complete
If light is flashing:
• Charging may take longer
than normal if battery
temperature is too high or
too low (charging may not be
completed).
• Battery/charger connector is
dirty. Clean with a dry cloth.
Always charge before first use! (battery shipped uncharged)
■
About batteries that you can use with this unit
It has been found that counterfeit battery packs which look very similar to the
genuine products are made available to purchase in some markets. Some of
these battery packs are not adequately protected with internal protection to
meet the requirements of appropriate safety standards. There is a possibility
that these battery packs may lead to fire or explosion. Please be advised that
we are not liable for any accident or failure occurring as a result of use of a
counterfeit battery pack. To ensure that safe products are used we recommend
that a genuine Panasonic battery pack is used.
• Use the dedicated charger and battery.
Insert the battery terminals and attach the battery
to the charger
Connect the charger to the electrical outlet
Plug-in type
●
Battery
Charger
(model-specific)
Charge the battery with the charger indoors
●
(10 °C to 30 °C (50 °F to 86 °F)).
Detach the battery after charging is
completed
The battery charger is in the standby condition when the AC power is supplied.
●
The primary circuit is always “live” as long as the battery charger is connected to
an electrical outlet.
Inlet type
●
• The AC
cable does
not fit
entirely into
the AC input
terminal. A gap will remain.
- 10 -
Charging battery
Guidelines for number of recordable pictures and operating time
The number of recordable pictures or available operating time may vary according to
surrounding environment and usage conditions. Figures may be reduced if flash, zoom,
or other functions are used frequently, or in colder climates.
DMC-FH6 DMC-FH4
DMC-S2
Number of recordable pictures (Approx.)280 pictures260 pictures
Recording time (Approx.)140 min.130 min.
Recording conditions by CIPA standard
●
• CIPA is an abbreviation of [Camera & Imaging Products Association].
• [Normal Picture] Mode.
• Temperature: 23 °C (73.4 °F) / Humidity: 50%RH when LCD monitor is on.
• Using a Panasonic SD Memory Card (32 MB).
• Using the supplied battery.
• Starting recording 30 seconds after the camera is turned on. (When the Optical
Image Stabilizer function is set to [ON].)
• Recording once every 30 seconds with full flash every second recording.
• Perform a zoom operation every recording (W end → T end, or T end → W end)
• Turning the camera off every 10 recordings and leaving it until the temperature of the
battery decreases.
Number reduced if intervals are longer – e.g. to approx. one quarter for 2-minute
intervals under the above conditions.
Playback time (Approx.)240 min.
The time required for charging varies depending on conditions of battery usage.
●
Charging takes longer at high or low temperatures and when the battery has not been
used for some time.
Battery will be warm during charging and for some time thereafter.
●
Battery will run out if not used for long periods of time, even after being charged.
●
We do not recommend frequently charging the battery.
●
(Frequently charging battery reduces maximum usage time and can cause battery to
expand.)
If available battery power is significantly reduced, battery is reaching end of lifespan.
●
Please purchase a new battery.
DMC-S5
- 11 -
Inserting and removing the card (optional)/
the battery
Turn off the power and slide
the card/battery door out ( )
before opening the door (
illustrated
Insert the battery and card,
making sure that their
orientation is correct
• Battery: Insert all the way firmly until
a locking sound is heard, and
check that the lever is hooked
over the battery.
• Card: Insert all the way firmly until it
clicks.
Close the card/battery door and slide the door in until you
hear a locking sound
) as
Card
(check orientation:
terminals face LCD)
Do not touch the terminal
Charged battery (check orientation)
- 12 -
Inserting and removing the card (optional)/the battery
■
To remove
• To remove battery: Move lever in direction of arrow.
DMC-FH6DMC-FH4 DMC-S5 DMC-S2
• To remove card: Press down in center.
Always use genuine Panasonic batteries.
●
If you use other batteries, we cannot guarantee the quality of this product.
●
Remove battery from camera after use.
●
• Keep the battery in a plastic bag, making sure that it is kept away from metallic
objects (such as clips) when carrying or storing the battery.
To remove the card or battery, turn the camera off and wait until the LCD monitor
●
display is completely blank. (Failure to wait may cause the camera to malfunction and
may damage the card or recorded data.)
Keep the Memory Card out of reach of children to prevent swallowing.
●
The unusable battery should be discarded in accordance with battery recycling laws.
●
Call the RBRC hotline at 1-800-822-8837 for information.
- 13 -
Inserting and removing the card (optional)/the battery
Picture save destination (cards and built-in memory)
■
Built-in memory (Approx. 70 MB)
Pictures may be copied between cards and the built-in memory. (→77)
●
The access time for the built-in memory may be longer than the access time for a card.
●
■
Compatible memory cards (optional)
The following SD standard-based cards (Panasonic brand recommended)
SD speed class refers to a specification for sustained write speeds. Confirm the SD speed by
checking the card label or other card related materials.
(Example)
Please reformat the card with this camera if it has already been
●
formatted with a computer or another device. (→39)
If the write-protect switch is set to “LOCK”, the card cannot be used
●
to record or delete pictures, and it cannot be formatted.
It is recommended that you copy important pictures to your
●
computer (as electromagnetic waves, static electricity, or faults may
cause data to be damaged).
Latest information:
●
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)
• Using a card of SD speed “Class 6”
recommended for recording motion pictures.
• Can be used with devices compatible with the
respective formats.
• Before using SDXC Memory Cards, check that
your computer and other devices support this type
of card.
http://panasonic.net/avc/sdcard/information/SDXC.html
• Only the cards listed on the left with the given
capacities are supported.
∗
or above is
Switch
- 14 -
Inserting and removing the card (optional)/the battery
Remaining battery (only when using battery)
(flashes red)
If the battery mark flashes red, recharge or replace battery.
Remaining battery and memory capacity
Estimated remaining pictures or recording time capacity
Displayed when no card is inserted (pictures will be saved to built-in memory)
When in operation
(Card) or (Built-in memory) are illuminated red.
While the light remains lit, an operation is taking place, such as picture writing or reading.
While the light is lit, do not turn off the power or remove battery, card, AC adaptor (for
dealer display purpose only) or DC coupler (for dealer display purpose only), as this can
cause data loss or damage. Do not subject the camera to vibrations, impact, or static
electricity. Should any of these cause camera operation to be terminated, attempt to
perform the operation again.
The number of pictures you can take and the recording time vary in proportion to card
capacity (and depending on recording conditions and type of card).
If you make Web upload settings, the recording picture capacity and the recording time
●
capacity of the card may be reduced.
■
Recording picture capacity (still pictures)
[Picture Size]Built-in memory2 GB32 GB64 GB
• When the number of recordable pictures exceeds 99,999, “+99999” is displayed.
■
Recording time capacity (motion pictures)
[Rec Quality]Built-in memory2 GB32 GB64 GB
• Motion pictures can be recorded continuously up to 2 GB.
The maximum available recording time for up to 2 GB only is displayed on the screen.
1
∗
DMC-S5
1
∗
16M
2
∗
14M
5M256501062021490
0.3M39010050162960247160
1
∗
HD
2
∗
HD
VGA–21m40s5h54m00s11h56m00s
QVGA2m25s1h02m00s16h59m00s34h21m00s
2
∗
DMC-FH6, DMC-FH4, DMC-S2
1130049109880
12330549010980
–10m10s2h47m00s5h39m00s
–8m10s2h14m00s4h32m00s
([h], [m] and [s] indicate “hour”, “minute” and “second”.)
- 15 -
Setting the clock
The clock is not set when the camera is shipped.
Press the Power button
The power is turned on.
If the language select screen is not displayed,
proceed to step .
Press [MENU/SET] while the
message is displayed
Press to select the language,
and press [MENU/SET]
• The [Please set the clock] message
appears.
Press [MENU/SET]
Press to select the items
(year, month, day, hour, minute,
display order or time display
format), and press to set
• To cancel → Press [ / ] button.
Press [MENU/SET]
Press [MENU/SET]
• To return to the previous screen,
press [ / ] button.
If the clock is not set, the correct date cannot be printed when you order a photo studio
●
to print the picture, or when you stamp the date on the pictures with [Date Stamp].
If the clock is set, the correct date can be printed even if the date is not displayed on
●
the screen of the camera.
- 16 -
Setting the clock
To change time setting
When resetting date and time, select [Clock Set] from the [Setup] menu.
• Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in the camera for 24 hours beforehand.
Select [Clock Set] from the [Setup] menu or [Rec] menu (→35)
Set the date and time
• Press to select the items (year, month, day, hour, minute, display order or
time display format), and press to set.
To cancel → Press [ / ] button.
- 17 -
Sequence of operations
Press the Power button
Press [MODE] button
Use cursor button to select the
recording mode and press
[MENU/SET]
■
Recording mode
[Intelligent Auto] Mode (→22)
Take pictures with automatic settings.
[Normal Picture] Mode (→40)
Take pictures with your own settings.
[Scene Mode] (→49)
Take pictures according to scene.
[Motion Picture] Mode (→25)
Take motion pictures.
■
Set [Rec] menu (→55) or [Setup] menu (→35) as required
Press [MENU/SET]
Use cursor button and [MENU/SET] to select the menu
Press [ / ] button
- 18 -
Sequence of operations
Flash
Microphone
Speaker
AF Assist Lamp
We recommend using the
supplied hand strap to avoid
dropping the camera.
Holding the camera
• To avoid camera shake, hold it with both
hands keeping your arms close to your body
and standing with your feet slightly apart.
• Do not touch the lens.
• Do not block the flash or the AF Assist
Lamp. Do not look at it from close range.
• Try to hold the camera steady when you
press the shutter button.
• Be careful not to block the microphone or
the speaker.
■
Zoom In/Out
DMC-FH6
Capture a
wider area
(wide-angle)
DMC-FH4 DMC-S5 DMC-S2
Capture a
wider area
(wide-angle)
■
Flash, self-timer, and other functions
Self-timer
Changing
information
display
Enlarge
the subject
(telephoto)
Enlarge
the subject
(telephoto)
Exposure
Compensation
Flash
- 19 -
Sequence of operations
Press the shutter button and take
pictures
Press halfway
(press lightly to focus)
Press fully
(press the button all the
way to record)
• For motion pictures, recording will start.
To end recording, press the shutter
button again.
Press the Playback button
Press [MODE] button
Use cursor button to select playback
mode and press [MENU/SET]
■
Playback mode
[Normal Play] Mode (→26)
Displays all pictures that can be played back.
[Slide Show] Mode (→65)
Automatically plays back the still pictures in order, in parallel with music.
[Filtering Play] Mode (→66)
Only pictures in selected categories and pictures set as favorite are
displayed.
[Calendar] Mode (→30, 67)
Pictures recorded on the date selected on the calendar screen can be
displayed.
- 20 -
Sequence of operations
Use cursor button to select a
picture to be played back
• Play back motion pictures or
panorama pictures
• [Auto Retouch]
• [Beauty Retouch]
DMC-FH6
Previous
Changing
information
display
• Editing or performing settings for
pictures using the Playback menu (→71)
Next
Press the Power button
- 21 -
Taking pictures with automatic settings
[Intelligent Auto] Mode
Recording mode:
Optimum settings are made automatically from information such as “face”, “movement”,
“brightness”, and “distance” just by pointing the camera at the subject, meaning that clear
pictures can be taken without the need to make settings manually.
Shutter button
Focus display
( When focus is aligned: illuminated
When focus is not aligned: flashing)
Display the screen for recording
mode selection
Select [Intelligent Auto] Mode
Take pictures
Press halfway
(press lightly to focus)
- 22 -
Press fully
(press the button all the
way to record)
Taking pictures with automatic settings [Intelligent Auto] Mode
Automatic Scene Detection
Camera reads scene when pointed at subject, and makes optimum settings automatically.
The icon of scene detected
Depending on recording conditions, different scene types may be determined for the
●
same subject.
If desired scene type is not selected, we recommend manually selecting the appropriate
●
recording mode.
When or is detected, Face Detection is activated, and the focus and exposure
●
are adjusted for the recognized faces.
About Backlight Compensation
●
Backlight is a condition where a light shines from behind a subject. When there is a
backlight, a subject appears darker and the camera automatically corrects the exposure
by increasing the brightness of an entire image. When the camera detects backlight,
is displayed on the LCD monitor.
Recognizes people
Recognizes landscapes
Recognizes night scenes and people in them
(Only when
Recognizes night scenes
Recognizes close-ups
Recognizes sunsets
Reads subject movement to avoid blurring when scene
does not correspond to any of the above.
∗
We recommend using a tripod and the self-timer.
is selected)
∗
∗
About flash
Press to select or .
When is selected, the optimum flash is selected automatically depending on
●
conditions. (→45)
When or is selected, the red-eye reduction function is activated.
●
When or is selected, the shutter speed is reduced.
●
About the Happy color setting
When [Color Mode] (→62) is set to [Happy], pictures are recorded with vivid coloring.
■
Settings:
Press [MENU/SET]
Press to select [Rec] menu and press [MENU/SET]
Press to select [Color Mode] and press [MENU/SET]
Press to select [Happy] and press [MENU/SET]
- 23 -
Taking pictures with automatic settings [Intelligent Auto] Mode
Notes on setting items
Only menu items which are displayed in the [Intelligent Auto] Mode can be set.
The settings selected in the [Normal Picture] Mode or other modes are reflected for not
displayed menu items on the [Setup] menu.
The settings for the following items are different from other recording modes:
●
[Picture Size], [Color Mode] and [Burst]
The settings for the following functions are fixed:
●
• [Auto Review]: [2 SEC.]
• [Stabilizer]: [ON]
• [AF Assist Lamp]: [ON]
• [i.Resolution]: [i.ZOOM]
• [Auto Power Off]: [5 MIN.]
• [White Balance]: [AWB]
∗
(23-area-focusing) when face cannot be recognized
The following functions cannot be used:
●
[Exposure], [Digital Zoom]
[ON]
DMC-FH6
DMC-FH4 DMC-S5 DMC-S2
DMC-FH6
on the [Rec] menu
• [Sensitivity]:
• [AF Mode]: (Face Detection)
• [i.Exposure]: [ON]
• [Red-Eye Removal]: [ON]
∗
- 24 -
Taking motion pictures [Motion Picture] Mode
Recording mode:
Microphone
(Do not block the microphone
with your fingers)
Remaining recording time (approx.)
Elapsed recording time
Display the screen for recording
mode selection
Select [Motion Picture] Mode
Start recording
Press halfway
(adjust the focus)
• Immediately release the shutter button after
pressing it all the way.
• The focus and zoom will remain as they
were at the beginning of recording.
Press fully
(start recording)
End recording
Press fully
Depending on the type of card used, a card-access display may appear for a while after
●
motion picture recording. This is not a fault.
In [AF Mode], (23-area-focusing) is fixed.
●
In [Stabilizer], [ON] is fixed.
●
When there is no space left to store the motion picture, recording automatically ends.
●
Additionally, recording in progress may be stopped, depending on the card used.
- 25 -
Viewing your pictures [Normal Play]
When a card is in the camera, pictures are played back from the card, and without a card,
pictures are played back from the built-in memory.
Press the Playback button
• Press again to enter the
recording mode.
Scroll through pictures
Previous Next
File number
Picture number/Total pictures
• Hold down to quickly scroll forwards/
backwards.
• Press the shutter button to switch to
recording mode.
■
Changing recording information display
Press
.
It may not be possible to view pictures on this camera that were previously edited on a
●
computer.
After pressing the Playback button and switching it into the playback mode, the lens
●
barrel will be retracted after approx. 15 seconds.
This camera is compliant with the unified DCF (Design rule for Camera File system)
●
standard formulated by the Japan Electronics and Information Technology Industries
Association (JEITA), and with Exif (Exchangeable image file format). Files that are not
DCF-compliant cannot be played back.
- 26 -
Viewing your pictures [Normal Play]
Viewing motion pictures
Select a picture with the motion picture icon, and press
Playback now starts.
Motion picture recording time
When playback starts, the elapsed playback time is displayed
in the top right of the screen.
Example: After 3 minutes and 30 seconds: [3m30s]
Motion picture icon
■
Operations during motion picture playback
Pause/play
Single-frame rewind (while paused)
Volume can be adjusted with the zoom lever or the zoom button.
●
It may not be possible to properly play back motion pictures recorded using other
●
cameras.
Motion pictures can be viewed on your computer using “PHOTOfunSTUDIO” on the
●
supplied CD-ROM.
Be careful not to block the speaker.
●
Speaker
Fast rewind (2 steps)
Stop
Fast forward (2 steps)
Single-frame forward (while paused)
- 27 -
Viewing your pictures [Normal Play]
Zooming in and viewing “Playback Zoom”
DMC-FH6
Turn the zoom lever to T side
DMC-FH4 DMC-S5 DMC-S2
Press the T side of the zoom
button
1x2x4x8x16x
DMC-FH6
DMC-FH4 DMC-S5 DMC-S2
DMC-FH6
DMC-FH4 DMC-S5 DMC-S2
Turn the zoom lever to T side/
Turn the zoom lever to W side/
• Move zoom position → Use cursor button to move the zoom position
Playback zoom cannot be used during motion picture playback.
●
Current zoom position (displayed for 1 sec.)
Press the T side of the zoom button
Press the W side of the zoom button
- 28 -
DMC-FH6
Viewing your pictures [Normal Play]
Viewing a list of pictures “Multi Playback”
Picture no./Total no.
Turn the zoom lever to W side
DMC-FH4 DMC-S5 DMC-S2
Press the W side of the zoom
button
1-picture
screen
DMC-FH6
DMC-FH4 DMC-S5 DMC-S2
DMC-FH6
DMC-FH4 DMC-S5 DMC-S2
12-picture
screen
Turn the zoom lever to W side/
Turn the zoom lever to T side/
30-picture
screen
Press the W side of the zoom button
Press the T side of the zoom button
Motion pictures
Panorama pictures
Calendar
Playback
• When you select a picture using the cursor button and press [MENU/SET] on the
12-picture or 30-picture screen, the selected picture is displayed on the 1-picture
screen (full-screen).
Pictures displayed with [!] cannot be played back.
●
- 29 -
Viewing your pictures [Normal Play]
Viewing pictures by their recording date “Calendar Playback”
DMC-FH6
Turn the zoom lever to W
several times
DMC-FH4 DMC-S5 DMC-S2
Press the W side of the zoom
button several times
Selected date (First picture from the date)
1-picture
screen
DMC-FH6
DMC-FH4 DMC-S5 DMC-S2
DMC-FH6
DMC-FH4 DMC-S5 DMC-S2
12-picture
screen
30-picture
screen
Turn the zoom lever to W side/
Press the W side of the zoom button
Turn the zoom lever to T side/
Press the T side of the zoom button
Calendar
Playback
• When you select a recording date using the cursor button and press [MENU/SET], the
display method changes to the 12-picture screen.
Only months when pictures were taken are shown on the calendar screen. Pictures
●
taken without clock settings are displayed with the date January 1, 2012.
Pictures taken with destination settings made in [World Time] are displayed in the
●
calendar screen using the appropriate date for the destination’s time zone.
- 30 -
Loading...
+ 71 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.