Panasonic DMC-FZ8, DMC-FX10, DMC-LZ6, DMC-FX30, DMC-FX12 User Manual

...
Page 1
Operating Instructions
For Digital Camera PC Connection
QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license therefrom.
VQT1D49
Page 2
Connection with the PC Offers much more Enjoyment
Using “LUMIX Simple Viewer” on the supplied CD-ROM, you can easily acquire pictures to the PC, print them, attach them to e-mails, and so on.
• In these operating instructions, “LUMIX Simple Viewer” is referred to as “Simple Viewer”.
1. Installing Simple Viewer,
first of all.
2. Acquiring recorded pictures
to the PC.
3. Printing pictures and
attaching them to e-mails.
2
Page 3
Contents
Connection with the PC Offers much more Enjoyment ..................................................... 2
Introduction
Read Before Use ...............................................................................................................4
Key terms ....................................................................................................................4
Is Simple Viewer compatible with any PC? .................................................................5
Setting up
Installing the Software 1 ................................................................................................... 6
Installing the USB driver (Windows 98/98SE only) ...................................................... 6
Installing the Software 2 ................................................................................................... 7
Installing Simple Viewer .............................................................................................. 7
Connecting the Digital Camera to PC ................................................................................ 8
Using Simple Viewer
Acquiring pictures to the PC (Acquire to PC) ..................................................................... 9
Viewing pictures (View) ...................................................................................................10
Printing pictures (Print) ....................................................................................................13
Sending pictures by e-mail (Send by e-mail) ...................................................................16
Advanced ......................................................................................................................... 18
Enabling the pictures stored in the PC to be used on Simple Viewer
(Add pictures) .......................................................................................................... 19
Viewing pictures on the PC with the digital camera
(Export to the card) .................................................................................................20
After Using Simple Viewer ...............................................................................................22
Others
To Acquire Picture without Using Simple Viewer ............................................................. 23
How to Use on Macintosh ................................................................................................ 24
How to Remove the USB Driver and Simple Viewer (Uninstall) ......................................25
When Pictures cannot be Acquired .................................................................................26
Troubleshooting ............................................................................................................... 27
Operating Environment .................................................................................................... 30
3
Page 4
Introduction
Read Before Use
• Please note that some of the explanations and screens covered in these operating instructions may differ from actual ones depending on the operating environment of the PC.
• The explanations of these operating instructions are subject to change without prior notification.
• No part of these operating instructions may be reproduced without permission.
• Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
• Explanations about Windows in these operating instructions are based on Windows XP screens.
• In these operating instructions, a Card refers to an SD memory card, including the built-in memory.
Key terms
• Key terms you should know at the minimum when using the PC are listed below. Refer to the operating instructions for the PC too.
Ter m Explanation
Introduction
Application software Refers to software programmes to be used for various
Install/Uninstall “Install” refers to incorporating software into the PC and
Drive/Driver A “Drive” refers to a PC peripheral device (CD-ROM drive,
File Refers to a document, picture, or other data.
Folder Refers to a place where a grouping of files are stored.
Click/Double-click “Click” refers to pressing and releasing the mouse button.
purposes such as word processing, spread sheet operation, picture editing, and e-mail sending/receiving.
making it ready for use, and deleting the installed software is referred to as “Uninstall”.
digital camera, etc.) that files are written in and read from, and the software to operate such a drive is referred to as a “Driver”.
Clicking the mouse button twice in rapid succession is referred to as “Double-click”.
• In these operating instructions, description is made on the basis of left-click.
• If double-clicking cannot be performed well, change the interval of the clickings.
4
Page 5
Introduction
Is Simple Viewer compatible with any PC?
Using a USB connection, you can acquire the pictures held in the digital camera to the PC. With Simple Viewer, however, you can save them to the PC more easily.
Windows
• To identify the OS (PC type), select [start] >> ([Setup] >>) [Control Panel] (>> [Performance and Maintenance]), and then (double-) click [System]. You can see the OS.
95 and
earlier
versions
Possible to use Simple Viewer?
Can I acquire the pictures held in the digital camera to the PC using the USB connection cable?
Necessary to install the USB driver?
Which page should I refer to?
¢1: You can acquire them if the PC has a PC card slot. ¢2: To learn how to acquire pictures, refer to P23.
• Please confirm compatibility with Windows Vista on the following website.
http://panasonic.co.jp/pavc/global/cs
(This Site is English only.)
¢1
P27
Macintosh
OS 8.x and earlier
versions
Possible to use Simple Viewer?
Can I acquire the pictures held in the digital camera to the PC using the USB connection cable?
Necessary to install the USB driver?
Which page should I refer to?
¢3: You can acquire them if the PC has a PC card slot. ¢4: If using Mac OS X 10.2.x or earlier versions, slide the Write-Protect switch on the
SDHC Memory Card to the [LOCK] side when acquiring images from it.
98 98SE Me 2000 XP
P6, 8
¢2
¢3
P27 P24
P6– P7–
OS 9 OS X
≤¢4
5
Page 6
Setting up
Setting up
Installing the Software 1
Installing the USB driver (Windows 98/98SE only)
• If Windows 98/98SE is used, install the USB driver (software for operating the digital camera through a PC) before connecting the digital camera to the PC.
• This installation is not required on the 2nd and later connections.
• If any OS other than Windows 98/98SE is used, this installation is not required.
• Before inserting the CD-ROM, close all running applications.
1. Insert the CD-ROM.
The setup menu will start.
2. Click [USB Driver].
3. Click [Next].
• Installation of the USB driver starts.
4. If the [Restarting Windows]
dialogue box appears, click [OK].
After the PC is restarted, installation of the USB driver will be completed.
If the setup menu does not start automatically:
• Double-click [My Computer] on the desktop, double-click or open [VFFXXXX] (part No. XXXX varies by model), and double-click [InstMenu.exe].
6
Page 7
Setting up
Installing the Software 2
Installing Simple Viewer
• This installation is not required on the 2nd and later connections.
• Before inserting the CD-ROM, close all running applications.
1. Insert the CD-ROM.
The setup menu will start.
2. Click [LUMIX Simple
Viewer].
3. Proceed with installation
according to messages appearing on the screen.
• Only when Windows 98SE is used, MDAC2.8 (Microsoft Data Access Components 2.8) may also be installed. Install it according to messages shown on the screen.
• Before first use following the completion of installation, be sure to select [Readme] from [start] >> [All programs] >> [Panasonic] >> [LUMIX Simple Viewer] to read additional information.
• Simple Viewer is installed in the following folder. (It cannot be changed.)
C:\Program Files\Panasonic\ LUMIXSimpleViewer
If the setup menu does not start automatically:
• Double-click [My Computer] on the desktop, double-click or open [VFFXXXX] (part No. XXXX varies by model), and double-click [InstMenu.exe].
If Simple Viewer cannot be installed:
• If Windows 2000/XP is used, you cannot install when you have logged on to the PC as a Limited Account user. Log on as an Administrator Account user and install again. For details, refer to the operating instructions for the PC.
7
Page 8
Setting up
Connecting the Digital Camera to PC
• When Windows 98/98SE is used, install the USB driver (P6) before connection.
• If the PC has a built-in SD memory card slot, insert a Card into the slot and you can acquire pictures to the PC by use of Simple Viewer.
• When the connection is established correctly, Simple Viewer automatically starts to open the screen for starting acquisition. (P9) If Windows 98 is used, refer to P23.
A: USB connection cable B: AC Adaptor
• The illustrations show examples of those of the DMC-FX12/DMC-FX10.
• AC adaptors may be optionally supplied depending on the model.
Preparations on the digital camera side
When you connect the digital camera to the PC, use batteries with sufficient battery power or the AC adaptor. If the remaining battery power is exhausted during communication, the recorded data may be damaged.
• If you use the AC adapter, connect it.
• Turn on the digital camera.
1. Connect the digital camera
to the PC via the supplied USB connection cable.
• Set the digital camera for connecting to a PC. (For details, refer to the operating instructions for the digital camera.)
• When the following screen appears, click [Cancel] to close it.
• If Simple Viewer does not start automatically, refer to P27.
• Do not operate the digital camera or disconnect the USB connection cable while transferring data in the digital camera. The software may not function correctly and damage the data being transferred.
• The shape of the terminal varies depending on the digital camera used. For details, refer to the operating instructions for the digital camera.
8
Page 9
Using Simple Viewer
Using Simple Viewer
Acquiring pictures to the PC ( Acquire to PC)
• When you have once exited Simple Viewer or view the pictures already acquired, double-click the short-cut icon of the LUMIX Simple Viewer on the desktop to start Simple Viewer.
1. When the message for
inquiring whether to start acquisition is displayed, click [Yes].
2. Click [OK].
• When there are many pictures to acquire or the file size of pictures is large, it may take time to acquire them.
Acquire destination folder:
• The pictures acquired to the PC are saved in the following folder.
Windows 2000/XP
C:\Documents and Settings\ All Users\My Documents\My Pictures\ PHOTOfunSTUDIO
Windows 98SE/Me
C:\My Documents\My Pictures\ PHOTOfunSTUDIO
• When you wish to change the current acquire destination folder, refer to P21.
When you click [Cancel] during acquisition:
• Acquisition will be aborted halfway, and the pictures already acquired will be displayed in thumbnail view.
Pictures will be acquired from the card to the PC and the [ View] screen will be opened to display the acquired pictures in thumbnail view.
9
Page 10
Using Simple Viewer
Viewing pictures ( View)
• When you have once exited Simple Viewer or view the pictures already acquired, double-click the short-cut icon of the LUMIX Simple Viewer on the desktop to start Simple Viewer.
1. Select [ View].
• When the above main menu is not displayed, click [ Menu] and then click [View].
2. Select any location where
pictures are saved.
[On the PC]
Select this option when viewing the pictures acquired to the PC.
• If pictures are added by [ Add pictures] in [ Advanced], you can view pictures stored in the PC other than the ones acquired by Simple Viewer. (P19)
[ On the memory card]
Click this button when viewing pictures on the Card connected using the USB connection cable.
10
3. Select any folder, and in
thumbnail view, select any picture.
• When you select [ On the memory card] in step 2, no folders are displayed.
To view motion pictures:
• QuickTime must be installed in the PC used.
• Depending on the efficiency of your PC, the picture or audio may be interrupted when playing back motion pictures.
Page 11
Using Simple Viewer
How to use the [ View] screen
12 3
1. Folder display
Folders containing acquired pictures are displayed. Folders are created on a date basis.
[M/D/Y] This option displays by the
day of recording.
[M/Y] This option displays by the
month of recording.
2. Thumbnail display
The pictures within a selected folder are displayed in thumbnail view. For motion pictures, the mark ( ) appears on the top left of its thumbnail.
• [ Recording date] Click to change the date order of the folder display and the thumbnail display.
Click this button to display pictures in descending order of the recording date.
Click this button to display pictures in ascending order of the recording date.
• [ Add] Click this button to register pictures already saved in the PC so that Simple Viewer can handle them. (P19)
• [ Open folder] Click this button to open the folder where the selected pictures are saved.
45 6 7 8
9121013 1114
3. Picture View
The picture selected in the thumbnail view is displayed a little larger. When motion picture is selected, it is automatically played back repeatedly until another picture is selected.
4. [ ]
Click this button to select the previous picture.
5. [ ]
Click this button to select the next picture.
6. [ 90 degs.] Each click of this button rotates the picture 90° clockwise.
7. [ My favorite]
When clicking this button, the mark ( ) is added to the picture, and it is registered in Favorites. When clicking the button again, the picture is excluded from Favorites. The pictures registered in Favorites can be viewed by selecting [My favorites] at the top of the Folder display.
8. [ Delete]
Click this button to delete a selected picture.
• Pictures taken in Baby mode are
15
displayed in folders created on a date basis and other folders such as the Baby mode folder. In this case, deleting a picture in one of the folders deletes the same picture in all the folders.
11
Page 12
Using Simple Viewer
456721 3
9. [ Enlarge]
Click this button to enlarge a selected picture to full screen. (P12)
10. [ Print 1 by 1]
When you click this button, the selected picture is printed. When you want to print multiple pictures, click [ Print] on the main menu. (P13)
11. [ Send by e-mail]
Click this button to attach a selected picture to an e-mail. (P16)
12. [ Menu]
Click this button to return to the main menu of Simple Viewer.
13. [ Back]
Click this button to return to the previous menu. (P10)
14. [ Exit]
Click this button to exit Simple Viewer.
15. Picture information
[Name] Name of the file on
[Type] File format.
[Location] Place where acquired
[File Name]
[File size] Capacity of the file.
In addition, [Picture size], [Recording date], [Manufacturer], [Model name], [Shutter speed], [Aperture value], [ISO sensitivity], [Exposure +/-], [White balance], [Flash], [Print compensation information], and [Recording mode] are displayed.
Simple Viewer.
files are stored.
Name of the file on the PC.
12
Full screen display
1. [ ]
Click this button to select the previous picture.
2. [ ]
Click this button to select the next picture.
3. Picture show
[Start] Click this button to start the picture show. In the main menu, click [ Advanced] >> [ Setting...] to change the picture show duration. (P21)
[ Stop] Click this button to stop the picture show.
4. Switching the display size of pictures
[ Fit to screen]
Enlarges or reduces the picture to the PC screen.
[ Full scale]
Displays the picture in its original size.
5. [ Menu]
Click this button to return to the main menu of Simple Viewer.
6. [ Back]
Click this button to return to the [ View] screen. (P10)
7. [ Exit]
Click this button to exit Simple Viewer.
If the operating buttons disappear:
Move the mouse and the operating buttons appear again.
Page 13
Using Simple Viewer
Printing pictures ( Print)
• When you have once exited Simple Viewer or view the pictures already acquired, double-click the short-cut icon of the LUMIX Simple Viewer on the desktop to start Simple Viewer.
1. Select [ Print].
• When the above main menu is not displayed, click [ Menu] and then click [ Print].
2. Select any location where
pictures are saved.
[On the PC]
Select this option when printing the pictures acquired to the PC.
• If pictures are added by [ Add pictures] in [ Advanced], you can print pictures stored in the PC other than the ones acquired by Simple Viewer. (P19)
[ On the memory card]
Click this button when printing a picture on the Card connected using the USB connection cable.
3. Select any folder to display
the pictures in it in thumbnail view, and select a one.
• When you select [ On the memory card] in step 2, no folders are displayed.
13
Page 14
Using Simple Viewer
4. Click [ Add] and then click
[ Next].
• The selected picture will be added to [List of pictures to be printed].
• To remove any picture from [List of pictures to be printed], click it in [List of pictures to be printed] and then click
Cancel
[
].
5. Set up printing, and click
[ Next].
[Please select the printing type] ( One sheet)
Used to print one picture on one sheet.
( Two sheets, Four sheets,
Eight sheets)
Used to print pictures on one sheet by the number of pictures corresponding to the mode selected. (Example: [ Two sheets])
(Index)
The selected pictures are printed in list form. (Example: When 16 pictures are selected.)
• Depending on the printer you are using, “Print without borders” cannot be selected or the sizes and types of paper you can use may be restricted. In such cases, click [ Set] and then set up printing.
14
• About 36 pictures can be printed one A4-size sheet of paper.
Page 15
Using Simple Viewer
[Please select the printer]
Set up the printer you are using.
[Choose border setting]
Select “No” or “Yes”.
[Please select the paper size]
Set the size of paper used for printing.
[Please select the paper type]
Set the type of paper used for printing.
[Detail printer settings are available]
Set up the printer in detail. (For details, refer to the operating instructions for the printer.)
6. Check the layout, and set up
printing.
[Date printing]
Used to print the date at the right bottom of the picture. Depending on the digital camera function, the date display will differ. (For details, refer to the operating instructions for the digital camera.)
• If you used the travel date function to take the pictures, the number of days that have passed at the travel destination can be added.
• If you used [BABY] or [PET] mode to take the pictures, the age of the baby or the pet in months and years can be added.
[Trimming]
([ One sheet] only) Used to print the picture in alignment with the paper size.
• Without trimming a picture, the entire picture is printed. If the aspect ratio of paper is different from that of a picture, blank spaces are left in the upper and lower parts or the left and right parts.
[Position adjustment]
Used to fine-adjust the printing position for trimming.
[Title]
([ Index] only) Used to print the name of the picture folder (e.g., 12/05/2007) at the top of the picture.
[Picture name]
([ Index] only) Used to print the date and time of recording the picture at the bottom of the picture.
[Print correction]
Used to enable the print correction function of the printer.
• This function is compatible with “PRINT Image Matching” and “Exif Print”. Refer to the operating instructions for your printer.
7. Click [ Print start].
02/21/2007
02/21/2007
21/02/2007
21/02/2007
Printing cannot be cancelled when it is under way.
15
Page 16
Using Simple Viewer
Sending pictures by e-mail ( Send by e-mail)
• When you have once exited Simple Viewer or view the pictures already acquired, double-click the short-cut icon of the LUMIX Simple Viewer on the desktop to start Simple Viewer.
• Compatible e-mail programmes are Outlook
®
Express and Microsoft® Outlook® only.
1. Select [ Send by e-mail].
• When the above main menu is not displayed, click [ Menu] and then click [ Send by e-mail].
2. Select any location where
pictures are saved.
[On the PC]
Select this option when sending by e-mail the pictures acquired to the PC.
• If pictures are added by [ Add pictures] in [ Advanced], you can attach to e-mails pictures stored in the PC other than the ones acquired by Simple Viewer. (P19)
[ On the memory card]
Click this button when attaching to e-mails pictures on the Card connected using the USB connection cable.
3. Select any folder, and in
thumbnail view, select any picture.
• Each click of [ 90 degs.] rotates the picture 90° clockwise.
• When you select [ On the memory card] in step 2, no folders are displayed.
16
Page 17
Using Simple Viewer
4. Click [ Add] and then click
[ Send by e-mail].
• Up to 20 pictures can be added at one time.
5. When the confirmation
message appears, select [Yes], [No] or [Cancel].
• Select [Yes] to change the file size of the picture to be attached to the maximum file size before sending it. Click [ Advanced] >> [ Setting...] to change the maximum file size. (P21)
• Click [No] if you do not want to change the file size of the picture before sending it.
The picture is attached to an e-mail and the e-mail programme starts automatically. Enter an address, body text, etc. in the e-mail and send it.
The e-mail programme does not start automatically.
Check the settings of the standard e-mail programme according to the following procedures.
• The method of checking it varies depending on the OS you are using.
1 Click [start] >> ([Setup] >>) [Control
Panel], and click [Internet Options].
2 Click the [Programs] tab, then click
[E-mail] to confirm the e-mail software
in use. Only the following e-mail programmes are guaranteed on operation.
• Outlook
•Microsoft
To change the maximum file size of pictures to be attached to e-mails:
• In the main menu, click [ Advanced]
®
Express
®
Outlook
>> [ Setting...]. You can change the file size. (P21)
®
17
Page 18
Using Simple Viewer
Advanced
• You can add pictures to enable using them on Simple Viewer, write the pictures acquired to the PC on the Card, and so on.
1. Select [ Advanced].
• When the above main menu is not displayed, click [ Menu] and then click [ Advanced].
2. Select any function to be
used.
[ Add pictures]
Click this button to register pictures already saved in the PC so that Simple Viewer can handle them. (P19)
[ Export to the card]
Click this button to write pictures saved in the PC to the digital camera. (P20)
[ Setting...]
Click this button to make various settings of Simple Viewer. (P21)
[ About...]
Click this button to display the version of Simple Viewer.
18
Page 19
Using Simple Viewer
Enabling the pictures stored in the PC to be used on Simple Viewer ( Add pictures)
1. Select [ Add pictures].
2. Select a folder containing
pictures to add, and click [Next].
• Click [Browse] to open the [Select Folder] dialogue box, and select a desired folder.
3. Specify whether or not to
add the pictures stored in the sub-folders (folders within the folder).
• After specifying it, click [Next].
4. Click [Start].
• When there are many pictures to add or the file size of pictures is large, it may take time to add them.
5. Click [OK], and then click
[Completion] to complete the addition.
19
Page 20
Using Simple Viewer
Viewing pictures on the PC with the digital camera ( Export to the card)
• Write pictures on the PC to the Card to enable them to be reproduced by the digital camera.
1. Select [ Export to the
card].
2. Select any folder, and in
thumbnail view, select any picture.
3. Click [ Add].
4. Click [ Write].
• Writing to the card is carried out.
• The pictures will be converted automatically to the format that the Panasonic digital camera can reproduce.
• Use a Card with sufficient free space. In case of inadequate free space, a part of the pictures is written.
• The pictures processed on the PC and the ones recorded with digital cameras other than the LUMIX may be displayed coarsely.
The selected picture is added to the list at the bottom of the screen.
• To remove any picture from the list at the bottom of the screen, click the picture in the list at the bottom of the screen, and then click [
Cancel
].
20
Page 21
Setting...
Using Simple Viewer
1. Select [ Setting...].
2. Set the settings and click
[OK].
[The folder to be acquired]
Select a desired folder used when acquiring pictures from the card to the PC.
• Click [Open folder] and you can see the pictures in the selected folder.
• Click [Browse] to open the [Select Folder] dialogue box, and select a desired folder.
• Even if you change the size setting, files of large sizes cannot be sent depending on Internet service providers.
[Full Screen]
Set the duration of the picture show and whether or not it is repeated.
• If motion pictures are played back, the following screen appears after playback is finished.
[Automatic acquisition]
Specify whether to automatically start Simple Viewer and acquire pictures when the digital camera is connected.
[Updating for the folder list]
Click [Updating] to delete empty folders in the Folder display.
[Default]
Clicking this button resets every setting to the state when you purchased.
[Maximum file size per picture to be attached to an e-mail]
Set the maximum file size of the picture to be attached to an e-mail. (1 MB by default)
• Only the pictures with a name of “XXXX.JPG” can be reduced in size. If you do not change the size, set this item to [Not specified].
21
Page 22
Using Simple Viewer
After Using Simple Viewer
To exit Simple Viewer:
1. Click [ Exit].
• When the [ Exit] button is not displayed, click [ Menu] to return to the main menu.
• When you try to exit on any screen other than the main menu screen, the confirmation message appears.
To disconnect the USB
connection cable safely:
2. Select [USB Mass Storage
Device], and click [Stop].
3. Confirm that [USB Mass
Storage Device] is selected, and click [OK].
1. Double-click the icon
displayed at the right bottom (in the task tray) of the PC screen.
The message for notifying hardware removal is displayed.
22
4. Click [Close].
You can remove the USB connection cable safely.
• Depending on the OS (or OS settings) such as Windows 98/98SE, the icon for removing hardware safely is not displayed in the task tray. In this case, make sure that [ACCESS] is not shown on the LCD monitor of the digital camera, and then disconnect the USB connection cable.
Page 23
Others
Others
To Acquire Picture without Using Simple Viewer
• Even if you use Windows 98 on which Simple Viewer cannot run, you can acquire pictures to your PC by connecting the digital camera and PC using the USB connection cable.
1. Connect the digital camera
to the PC via the supplied USB connection cable. (P8)
2. Double-click [Removable
Disk] in [My Computer].
3. Double-click [DCIM] folder.
What is a drag-and-drop operation?
Refers to pressing the mouse button, moving the mouse with the mouse button pressed, and releasing the mouse button.
To disconnect the USB connection cable safely:
Refer to P22.
4. Using a drag-and-drop
operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC.
23
Page 24
Others
How to Use on Macintosh
• If you use Mac OS 9/OS X, you cannot use Simple Viewer, but can acquire pictures to your PC using the USB connection cable.
• If you use Mac OS 8.x or an earlier version, refer to P27.
1. Connect the digital camera
to the PC via the supplied USB connection cable. (P8)
2. Double-click [NO_NAME] or
[Untitled] displayed on the desktop.
3. Double-click [DCIM] folder.
4. Using a drag-and-drop
operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC.
What is a drag-and-drop operation?
Refers to pressing the mouse button, moving the mouse with the mouse button pressed, and releasing the mouse button.
To make sure that the digital camera is connected correctly:
Check that the [NO_NAME] or [Untitled] disk icon is displayed on the desktop.
To disconnect the USB connection cable safely:
Drag the [NO_NAME] or [Untitled] disk icon to the [Trash], and then disconnect the USB connection cable.
24
Page 25
Others
How to Remove the USB Driver and Simple Viewer (Uninstall)
• Usually, it is unnecessary to uninstall these programmes. When these programmes go out of order, uninstall and install them again (P6).
1. Click [start] >> ([Setup] >>)
[Control Panel].
2. Double-click [Add or
Remove Programs].
3. Select a software
programme to be remove, and click [Change/Remove].
• To remove other drivers and software programmes, repeat these step 3.
• When removing the USB driver, select [Panasonic USB Storage Driver].
• When removing Simple Viewer, select [LUMIX Simple Viewer].
• The procedure for uninstalling may vary depending on the PC. For details, refer to the operating instructions for the PC you are using.
25
Page 26
Others
When Pictures cannot be Acquired
• When pictures cannot be acquired though you connect your digital camera and PC using the USB connection cable, use the following procedures.
Check the following items
first.
When Windows 98/98SE is used, install the USB driver (P6), then connect the cable.
If the PC in use has two or more USB ports, connect the USB connection cable to other USB ports in turn.
• If you connect the digital camera to a USB port of the PC’s keyboard, normal operation may not result.
• If you connect the digital camera using a USB hub or USB extension cable, normal operation is not guaranteed.
Is any Card inserted into your digital camera? Or, are there pictures on it?
Are the pictures already acquired to the PC?
• You are not allowed to acquire the same pictures.
Pictures cannot be acquired
even after the above checks.
Make sure that [Removable Disk] is added in [My Computer].
• Drive letters (e.g., H:) may vary depending on PC.
If the Removable disk is not added, perform the following operations.
1 Click [start] >> ([Setup] >>) [Control
Panel], and double-click [System].
2 Click ([Hardware] >>) [Device
Manager], and check that [Other Devices] is displayed.
3 If [Other Devices] is displayed, delete it.
• If it is not displayed, check the connection. (P8)
4 Return to the original screen, and turn
off the PC.
5 Disconnect the USB connection cable
from the PC.
6 Turn on the PC to start it. 7 Install the USB driver again. (For
Windows 98/98SE only)
8 Connect the USB connection cable to
the PC.
• Check that a [Removable Disk] is added again. If any [Removable Disk] is not added, repeat the above steps.
26
Page 27
Troubleshooting
About connection/acquisition
Question Answer
How to acquire pictures on Windows 95, Mac OS 8.x, or earlier versions.
Pictures cannot be acquired from the internal memory of the digital camera.
About Simple Viewer
Question Answer
Simple Viewer does not start automatically. To view acquired pictures again after exiting Simple Viewer.
Memory Card
• If the PC has a built-in PC card slot, use the PC card adaptor (optional) for SD memory card to acquire pictures.
Internal memory (This is applicable only to digital cameras having the internal memory.)
• Copy the pictures stored in the internal memory to the Card and then acquire them by using the PC card adaptor (optional) for SD memory card. For the details of copying, refer to the operating instructions for your digital camera.
Remove the Card from the digital camera, and reconnect it with the PC.
Double-click the short-cut icon of the LUMIX Simple Viewer on the desktop. If the short-cut icon does not exist on the desktop, click [start] >> [All programs] >> [Panasonic] >> [LUMIX Simple Viewer] >> [LUMIX Simple Viewer].
Only when Simple Viewer does not start automatically:
• Click [ Advanced] >> [ Setting...] and set [Automatic acquisition] to [Yes]. (If you do not wish to allow it to start automatically, set to [No].)
Others
27
Page 28
Others
About printing
Question Answer
No picture can be printed. Is the printer set up correctly? Refer to the operating
I wish to change the print position, character size, or character colour of the date.
The top and bottom parts or left- and right-end parts of a picture are trimmed.
Blank spaces are left in the top and bottom parts or the left- and right-end parts.
A date is printed over the existing date.
The date is not printed. If the picture was recorded with the digital camera of which
Others
Question Answer
Pictures added onto the PC are not normally displayed.
How should I change folder names or file names?
instructions for your printer.
The print position, character size, or character colour for date printing are fixed. They cannot be changed.
Set [Trimming] to [No] on the occasion of printing. A trimmed picture is printed with its edges trimmed off if its aspect ratio is different from that of printing paper.
Set [Trimming] to [Yes] on the occasion of printing. If trimming is not applied, the whole picture is printed. If the aspect ratio of the paper is different from that of the picture, blank spaces are left in the top and bottom parts or the left- and right-end parts.
The pictures have been imprinted with the date. Set [Date printing] to [No] when printing.
the clock was not set, or if it was recorded with any digital camera other than Panasonic ones, its date may not be printed correctly.
If you change folder names or file names, the pictures concerned may not be displayed.
• To view on Simple Viewer the pictures associated with a change in folder name or file name, register those pictures by use of [ Add pictures] function. (P19)
You can change folder names or file names on the PC.
• The location where folders and files are stored can be found at [Location] indicated in the picture information. (P12)
• To view on Simple Viewer the pictures associated with a change in folder name or file name, register those pictures by use of [ Add pictures] function. (P19)
28
Page 29
Others (continued)
Question Answer
When acquiring motion pictures, two identical pictures are displayed.
Motion pictures are not played back.
The PC has come not to operate when plugging and unplugging the USB connection cable.
When you take motion pictures with the digital camera, these are recorded as both motion pictures (MOV format) and still pictures (JPEG format). (When taking still pictures with audio, or files that are TIFF or RAW format, two images are also recorded.) To delete pictures related in this way with Simple Viewer, delete each picture individually.
Install QuickTime.
By default, Simple Viewer starts automatically when connecting the digital camera and PC using the USB connection cable. (Setting at the time of purchase) Change the setting so that Simple Viewer does not start automatically and the situation may be improved.
• Select [ Advanced] >> [ Setting...] and set [Automatic acquisition] to [No]. Simple Viewer comes not to start automatically.
To start Simple Viewer manually, double-click the short-cut icon of LUMIX Simple Viewer on the desktop.
Others
29
Page 30
Others
Operating Environment
USB-connectable environment
Compatible OS: Microsoft
Microsoft Microsoft Microsoft Microsoft Microsoft and Mac OS 9.x/Mac OS X (Windows Me/2000/XP and Mac OS 9.x/Mac OS X do not require the USB driver to be installed.)
LUMIX Simple Viewer
Compatible PC: IBM
Intel CPU)
Compatible OS: Microsoft
Microsoft Microsoft Microsoft Microsoft
Memory: 128 MB or more (256 MB or more recommended)
Display: High Colour (16 bit) or more
Desktop resolution of 800k600 pixels or more (1024k768 or more recommended)
Hard disk: [For install] 200 MB or more
[For use] 200 MB or more
Required software: QuickTime 6.1 or later
Sound: Windows compatible sound device
Drive: CD-ROM drive (required to install this program)
Interface: USB port
(When devices are connected through USB hub or by using USB extension cable, operation is not guaranteed.)
File format: JPEG, TIFF (still picture), RAW (pictures of this format can be
acquired or written, but cannot be displayed.) MOV (motion picture)
• Even if the system requirements mentioned in these operating instructions are fulfilled, some personal computers can not be used.
• Operation on an upgraded OS is not guaranteed.
30
®
Windows® 98
®
Windows® 98 Second Edition
®
Windows® Millennium Edition
®
Windows® 2000 Professional
®
Windows® XP Home Edition
®
Windows® XP Professional
®
PC/AT compatible PC having Intel® Pentium® III 450 MHz,
®
Celeron® 400 MHz or higher CPU (including compatible
®
Windows® 98 Second Edition
®
Windows® Millennium Edition
®
Windows® 2000 Professional
®
Windows® XP Home Edition
®
Windows® XP Professional
Page 31
Others
• Operation on an OS other than the one pre-installed is not guaranteed.
• Multi-boot environment is not supported.
• Only available when the user is logged in as the system administrator.
• This software may not run properly on user-built computers.
• If the size of the character is set larger than the standard size on [Appearance] or [Settings] in [Display Properties], some buttons are displayed beyond the screen and cannot be operated. In this case, restore the font size to the normal size on [Display Properties].
• This software can not be used on 64-bit OS.
• Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
• IBM and PC/AT are registered trademarks of International Business Machines Corporation of the U.S.
• Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and other countries.
• Intel, Pentium and Celeron
are registered trademarks or trademarks of Intel Corporation
in the United States and other countries.
• Other names of systems and products mentioned in these instructions are usually the trademarks or registered trademarks of the manufactures who developed the system or product concerned.
31
Page 32
B
VQT1D49
F1206Kd0 ( 30000 A)
C
Matsushita Electric Industrial Co., Ltd.
Web Site: http://panasonic.net
B
Loading...