Panasonic Cw-xc63hu, Cw-xc83gu, Cw-xc83hu Owner's Manual

INSTALLATION AND

OPERATING INSTRUCTIONS

MANUEL D'INSTALLATION ET D'UTILISATION

Room Air Conditioner Climatiseur de fenêtre

Model, Modèle:CW-XC63HU, CW-XC63HK, CW-C83GU, CW-XC83GU,

CW-XC83HU, CW-XC83HK, CW-XC78HU

Please read these operating instructions thoroughly before using your air conditioner and keep for future reference.

Il est recommandé de lire attentivement ce manuel avant d'utiliser l'appareil. Conservez ce manuel.

For U.S customers : For assistance, please call : 1-800-211-PANA(7262) or Register your product at : http://www.panasonic.com/register

For customers in Canada : For assistance, please call : 905-624-5505

Safety Precautions

About the Controls on the Air Conditioner

Features and Installation

Before you call for service...

FOR YOUR RECORDS

Staple your receipt to this page in case you need it later. Write down the model and serial numbers here:

Model # Serial #

You can find them on a label on the side of each unit.

Dealer's Name Date Purchased

Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner.

You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.

READ THIS MANUAL

CAUTION

• Contact the authorized Service technician for repair or maintenance of this unit.

• The air conditioner is not intended for use by young children or infirm persons without supervision.

• Young children should be supervised to ensure that they do not play with the air conditioner.

Safety Precautions

Safety Precautions.............3

About the Controls on the Air Conditioner

Controls..............................5

Remote Controller..............7

Ventilation ..........................8

Air Direction........................8

How to Secure Drain Pipe

....8

Care and Maintenance

Air Filter Cleaning...............9

Features

Features...........................10

Installation

How to Install the Unit......11

Window Requirements.....11

Installation Kit Contents ...12 Suggested Tool

Requirements...................12

Cabinet Installation...........13

Electrical Data..................15

Electrical Safety ...............16

Before you call for service...

Normal Operation.............17

Abnormal Operation.........17

WARNING

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must be followed.

■ Incorrect operation due to ignoring of instruction will cause harm or damage. The seriousness is classified by the following indications.

WARNING : This symbol indicates the possibility of death or serious injury. CAUTION

This symbol indicates the possibility of injury or damage to property only.

■ Meanings of symbols used in this manual are as shown below.

Be sure not to do this.

Be sure to follow the instructions.

Plug in the power plug properly.

• Otherwise, it will cause electric shock or fire due to heat generation.

Do not operate or stop the unit by inserting or pulling out the power plug.

• It will cause electric shock or fire due to heat generation.

Do not damage or use an unspecified power cord.

• It will cause electric shock or fire.

•

If the power cord is damaged, it must be replaced by the manufacturer or an authorized service center or a similarly qualified person in order to avoid a hazard.

Do not modify power cord length or share the outlet with other appliances.

• It will cause electric shock or fire due to heat generation.

Do not operate with wet hands or in a damp environment.

• It will cause electric shock.

Do not direct air flow at room occupants.

• This could lead to health problems.

Safety Precautions

When the air filter is to be

removed, do not touch the

metal parts of the unit.

• It may cause an injury.

Do not clean the air

conditioner with water.

• Water may enter the unit and degrade the insulation. It may cause an electric shock.

Ventilate well when used

together with a stove, etc.

• An oxygen shortage may occur.

When the unit is to be

cleaned, switch off, and turn

off the breaker.

• Since the fan rotates at high speed during operation, it may cause an injury.

Do not put a pet or house

plant where it will be exposed

to direct air flow.

• This could injure the pets or plants.

Do not use for special

purposes.

• Do not use this air conditioner to preserve precision devices, food, pets, plants, and art objects. It may cause deterioration of quality, etc.

Do not operate switches

with wet hands

• It may cause an electric shock.

Do not apply an insecticide

or flammable spray.

• It may cause a fire or deformation of the cabinet.

Do not put a heater, etc.

where it is exposed to direct

air flow.

•

It may cause imperfect combustion.

About the Controls on the Air Conditioner

The controls will look like one of the following.

Controls

When the air conditioner has performed its cooling operation and is turned off or set to the fan position, wait at least 3 minutes before resetting to the cooling operation again.

Off - Turns air conditioner off. Med Fan - Med speed fan operation without cooling. Low Fan - Low speed fan operation without cooling. High Cool - Cooling with high speed fan operation. Med Cool - Cooling with med speed fan operation. Low Cool - Cooling with low speed fan operation.

This automatically controls the temperature of the indoor air. Turn the knob so that arrow points to the higher number for greater cooling. Point the arrow to the lower number for more moderate cooling. (i.e. the higher the number, the greater the cooling)

• FOR NORMAL COOLING

1. Turn the operation switch to the High Cool or the Low Cool setting.

2. Set the Thermostat control to the desired temperature mark 5 (the mid-point is a good starting position). If the room temperature is not satisfactory after a reasonable time, adjust the control to a cooler or warmer setting, as appropriate.

• FOR MAXIMUM COOLING

1. Turn the Operation Knob to the High Cool setting.

2. Set the Thermostat control to the largest (9) temperature mark.

• FOR QUIETER OPERATION

1. Turn the Operation Knob to the Low Cool setting.

2. Set the Thermostat control as needed.

CAUTION

Model : CW-C83GU

3 2

6 2

3 6 2 5

Model: CW-XC83HU

Model: CW-XC83GU

CW-XC63HU

Model: CW-XC83HK

CW-XC63HK

Model: CW-XC78HU

About the Controls on the Air Conditioner

Controls

OPERATION

• To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.

• This button takes priority over any other buttons.

• When you first turn it on, the air conditioner is on the High cool mode and the temp. at 72°F(22°C)

MODE

• Every time you push this button, it will toggle between COOL, FAN and DRY.

ON/OFF TIMER

• Every time you push this button, timer is set as follows. (1Hour → 2Hours → 3Hours → 4Hours → 5Hours 6Hours → 7Hours → 8Hours → 9Hours → 10Hours 11Hours → 12Hours → O)

• The Setting Temperature will be raised by 2°F(1˚C) 30min. later and by 2°F(1˚C) after another 30 min.

FAN SPEED

•

Every time you push this button it is set as follows. {High(F3) → Low(F1) → Med(F2) → High(F3)...}.

TEMPERATURE SETTING

•

This button can automatically control the temperature of the room. The temperature can be set within a range of 60°F to 86°F by 1°F.(16˚C to 30˚C by 1˚C) Select the lower number for lower temperature of the room.

ECONOMY

• If you push the button, the fan stops when the compressor stops cooling.

• Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.

AIR SWING

• This button can automatically control the air flow direction.

REMOCON SIGNAL RECEIVER

OPERATION

TEMP

TIMER

AIR

SWING

MODE

ECONOMY

FAN SPEED

2 4 6

OPERATION

TEMP

TIMER

MODE

ECONOMY

FAN SPEED

2 4 6

OPERATION

TEMP

TIMER

MODE FAN SPEED

2 4

Model: CW-XC83HU Model: CW-XC78HU

Model: CW-XC63HU, CW-XC63HK

CW-XC83GU, CW-XC83HK

About the Controls on the Air Conditioner

Remote controller

OPERATION

• To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.

• This button takes priority over any other buttons.

• When you first turn it on, the air conditioner is on the High cool mode and the temp. at 72°F(22˚C).

MODE

• Every time you push this button, it will toggle between COOL, FAN and DRY.

ON/OFF TIMER

- STOPPING OPERATION

• Every time you push this button, when the air conditioner is operating, timer is set as follows. (1Hour → 2Hours → 3Hours → 4Hours → 5Hours → 6Hours → 7Hours → 8Hours → 9Hours → 10Hours → 11Hours → 12Hours → O)

• The Setting Temperature will be raised by 2°F(1°C) 30min. later and by 2°F(1°C) after another 30 min.

- STARTING OPERATION

• Every time you push this button, when the air conditioner is not operating, timer is set as follows. (1Hour → 2Hours → 3Hours → 4Hours → 5Hours → 6Hours → 7Hours → 8Hours → 9Hours → 10Hours → 11Hours → 12Hours → O)

FAN SPEED

• Every time you push this button it is set as follows. {High(F3) → Low(F1) → Med(F2) → High(F3)...}.

TEMPERATURE SETTING

• This button can automatically control the temperature of the room. The temperature can be set within a range of 60°F to 86°F by 1°F.(16˚C to 30˚C by 1˚C) Select the lower number for lower temperature of the room.

ECONOMY

• If the switch is set to "On", the fan stops when the compressor stops cooling. Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.

AIR SWING

• This button can automatically control the air flow direction.

Precaution:

The Remote Controller will not function properly if strong light strikes the sensor window of the air conditioner or if there are obstacles between the Remote Controller and the air conditioner.

+ 15 hidden pages