Panasonic CQ-DF701W User Manual

≥Please read these instructions carefully before using this product and save this manual for future use.

CD Player/Receiver with Dot Matrix LCD and CD Changer Control

Operating Instructions

VOL

TUNE

SOURCE

D•M

CQ-DF701W

CD RECEIVER WIITH FULL DOT MATRIX DISPLAY

DIM

OPEN

TRACK

DISC

•

SET

BAND

REMOTE

SET/AUTO

•

MUTE

DISP

CH•C

MOSFET

50WX4

S•HDB

HDB

; / 1

PWR

CQ-DF701W

E N G L

I S H

CQ-DF701W

❐ Use this Product Safely

Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineering, manufactured with carefully selected components and assembled by people who take pride in their work. Once you discover the quality, reliability, and value we have built into this product, you too will be proud to be a member of our family.

When Driving

Keep the volume level low enough to be aware of road and traffic conditions.

When Car Washing

Do not expose the product, including the speakers and CDs, to water or excessive moisture. This could cause electrical shorts, ﬁre, or other damage.

When Parked

Parking in direct sunlight can produce very high temperatures inside your car. Give the interior a chance to cool down before switching the unit on.

Use the Proper Power Supply

This product is designed to operate with a 12 V DC, negative ground battery system.

Disc Mechanism

Do not insert coins or any small objects. Keep screwdrivers and other metallic objects away from the disc mechanism and disc.

Use Authorized Servicenters

Do not attempt to disassemble or adjust this precision product. Please refer to the Servicenter list including with this product for service assistance.

For Installation

This product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30x.

≥Operating instructions .................................... 1

≥Installation hardware................1 set (➡ page 28)

≥Power connector ............................................ 1

≥Remote control unit ........................................ 1

≥Lithium battery (CR2025)................................ 1

❐ Components

このページは

繁体中国語のため

本社で作成しております。

E N G L

I S H

CQ-DF701W

Remote Control Unit Preparation

E N G L

I S H

CQ-DF701W

Features

Full-dot expressiveness <3D dot matrix display>

You can select an operation quickly because operation items are shown on the display. You can also enjoy variety of actions and direction.

Audio control functions

≥S•HDB (Super High Deﬁnition Bass) (➡ page 14) ≥CD changer control (➡ page 20)

Anti-theft removable face

You can remove the face plate when you leave your car. (➡ page 33)

You can operate this unit by pressing buttons on the main unit and the remote control. ∫ These instructions describe buttons that are concerned with operations as follows.

Example: Press [P. SET "] or [P. SET #]/["] or [#].

∫ Some operations can be activated by pressing buttons only on main unit or remote control.

Those cases are described in the instructions.

Example: Press [D•M] on the main unit to select the preset station.

Battery Installation

Remove the battery holder. Pull the holder by the position B while pushing position A in the direction indicated by the arrow. Install the battery on the battery holder. Set a new battery properly with its (i) side facing up as shown in the ﬁgure. Insert the battery holder. Push in the battery holder back into its original position.

Battery Notes

Remove and dispose of an old battery immediately. Battery Information:

≥Battery type: Panasonic lithium battery (CR2025) (included) ≥Battery life: Approximately 6 months with normal use (at room temperature)

Back side

Lithium battery (included)

Battery holder Position A

Position B

≥Do not disassemble or short the battery. Do not throw a battery into a ﬁre. ≥Keep batteries away from children to avoid the risk of accidents. ≥Be careful to the local disposal rules when you dispose of batteries.

Caution:

≥Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a ﬁre.

Battery leakage may damage the unit.

Before Reading these Instructions

[buttons on the main unit]/[remote control]

VOL

TUNE

SOURCE

D•M

CQ-DF701W

CD RECEIVER WIITH FULL DOT MATRIX DISPLAY

DIM

OPEN

TRACK

DISC

•

SET

BAND

REMOTE

SET/AUTO•P

MUTE

DISP

CH•C

MOSFET

50WX4

S•HDB

HDB

; / 1

PWR

Point the remote control unit at the main unit’s sensor (REMOTE).

E N G L

I S H

CQ-DF701W

E N G L

I S H

CQ-DF701W

General

Mute/Attenuator

ON: Press [

MUTE

OFF: Press again.

Decreasing volume range depends on setting. (➡ page 26)

Note:

≥When the power is switched on for the ﬁrst time,

a demonstration message appears on the display.

To cancel this display, press [DISP].

Volume

[" VOL]: Up [# VOL]: Down

Setting range: 0 to 40

ACC

Open/Close the Front Panel

OPEN: Press [OPEN] on the front panel. CLOSE: Raise the panel by hand.

: No sound.

Cautions:

≥To avoid damaging the front panel, do not push it down or place objects on it while it is open. ≥Do not pinch your ﬁnger or hand in the front panel. ≥Do not insert foreign matter into the disc slot.

VOL

TUNE

SOURCE

CD RECEIVER WIITH FULL DOT MATRIX DISPLAY

DIM

•

OPEN

TRACK

DISC

•

SET

BAND

REMOTE

MUTE

DISP

CH•C

MOSFET

50WX4

HDB

S•HDB

; / 1

PWR

CQ-DF701W

SET/AUTO•P

Radio

CD player CD changer control

(When a CD is inserted.) (When a CD changer is connected and

magazine is in the changer.)

Source

AUX-IN setting

(When AUX-IN setting is activated.) ( page 26)

[MUTE]

[SOURCE]

(POWER)

[VOL "] [VOL #]

SEL

Car Audio

SOURCE

POWER

VOL

DISPMUTE

RAND

REP

SCAN

BAND

Power

Turn the key in the ignition until the accessory indicator lights.

ON: Press [SOURCE] (PWR). OFF: Press [SOURCE] (PWR) again for more

than 1 second.

≥After turning off the ignition key, a security

message is displayed, and the panel removable alarm that reminds you to take the panel is activated. (When S-LED is set to ON ➡ page 26)

Source

Press [SOURCE] (PWR) to change the source.

VOL

TUNE

SOURCE

D•M

CQ-DF701W

CD RECEIVER WIITH FULL DOT MATRIX DISPLAY

DIM

OPEN

TRACK

DISC

•

SET

BAND

REMOTE

MUTE

DISP

CH•C

MOSFET

50WX4

S•HDB

HDB

; / 1

PWR

SET/AUTO•P

Note:

≥The sound level for each source is stored in

memory. (For radio, one volume setting for AM, one volume setting for all FMs)

: Decrease the volume to 1/10 .

E N G L

I S H

CQ-DF701W

E N G L

I S H

CQ-DF701W

General (Continued)

Display Change

When Power is ON

Press [DISP].

Notes:

≥Set the spectrum analyzer pattern in a separate procedure. (➡ page 24) ≥ : Displays before adjusting the clock. (➡ page 24)

Press and hold [DISP] for more than 2 seconds.

≥The audio indicator is displayed for 15 seconds and returns to the pre-

vious display.

≥When the indicator lights, the audio function (S•HDB/SUB•W) is now

activated.

Press [DISP] again to cancel.

Display and light off (when it is turned on.)

If you press a button, the light is turned on, the mode display appears for 5 seconds, and the light is turned off again.

When Power is OFF

Press [DISP].

Mode display

Mode and spectrum analyzer display

Mode and clock display

Clock display

Display and light off

S•HDB (Super High Deﬁnition Bass)

Especially for rock music, the bass-sound will be more powerful. Press [S•HDB] on the main unit to change the Super High Deﬁnition Bass on.

Dimmer (Display Brightness Setting Range)

Press [DIM] on the main unit to change the dimmer level.

VOL

TUNE

SOURCE

D•M

CQ-DF701W

CD RECEIVER WIITH FULL DOT MATRIX DISPLAY

DIM

OPEN

TRACK

DISC

•

SET

BAND

REMOTE

MUTE

DISP

CH•C

MOSFET

50WX4

S•HDB

HDB

; / 1

PWR

SET/AUTO•P

[DISP]

SEL

Car Audio

SOURCE

POWER

VOL

DISPMUTE

RAND

REP

SCAN

BAND

: Default

: The bass sounds of the speakers are

strongly emphasized.

: The bass sounds of the speakers are

moderately emphasized. (The sounds of the subwoofer can be heard clearly.)

: Bright

Default

: Medium

: Dark

Spectrum analyzer display

If you press a button, the mode and spectrum analyzer display appear for 5 seconds.

Note:

≥When S•HDB is on, the indicator (S•HDB BOOM or TIGHT)

is shown on the audio indicator display. (➡ page 15)

E N G L

I S H

CQ-DF701W

E N G L

I S H

CQ-DF701W

Radio

Band

Press [BAND] to change the band.

Radio Mode

Press [SOURCE] to change to the radio mode.

Tuning

[TUNE $]/[$]: Up [TUNE %]/[%]: Down Press and hold [TUNE $] or [TUNE %]/[$] or [%] for more than 0.5 seconds, then release.

Seeking will start.

One-Touch Selection of a Preset Station

Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.

Manual Preset Memory

Manually save a station in the preset memory

Entering Numbers Directly from the Remote Control

Select a band and frequency (step 1, 2 and 3 on the previous page). Press and hold [1] to [6] on the remote control for more than 2 sec-

onds to memorize.

1 2

Auto Preset Memory (AUTO

•

Automatically save strong stations in the preset memory

Select a band (steps 1 and 2 on the previous page).

Press and hold [BAND] (AUTO•P) for more than 2 seconds.

Note:

≥New stations are overwritten on existing saved stations after following this procedure.

Preset Station Calling

Select a band (steps 1 and 2 on the previous page). Press [P. SET "] or [P. SET #]/["] or [#] to select the preset

number for tuning in the preset station.

Entering Numbers Directly from the Remote Control

Press [1] to [6] on the remote control.

VOL

SET/AUTO•P

TUNE

SOURCE

D•M

CQ-DF701W

CD RECEIVER WIITH FULL DOT MATRIX DISPLAY

DIM

OPEN

TRACK

DISC

•

SET

BAND

REMOTE

MUTE

DISP

CH•C

MOSFET

50WX4

S•HDB

HDB

; / 1

PWR

[SOURCE]

[%] [$]

(TUNE)

[1] to [6] Preset button

[BAND]

["] [#]

(PRESET MEMORY) (SELECT)

SEL

Car Audio

SOURCE

POWER

VOL

DISPMUTE

RAND

REP

SCAN

BAND

FM1

FM2 FM3

Source

Note:

≥Frequency setting can be performed even after selecting a preset num-

ber.

Select a band and frequency (steps 1, 2 and 3 on the previous page).

Press and hold [P. SET "] or [P. SET #]/["] or [#] for more than 2 seconds until the preset number blinks.

Press [P. SET "] or [P. SET #]/["] or [#] to select a preset number.

Press and hold [P. SET "] or [P. SET #]/["] or [#] for more than 2 seconds to memorize.

Direct Memory

Your favorite radio station can be memorized in [D•M] on the main unit.

Default: FM 87.50 MHz

Memorize

Recalling the Direct Memory

Select a band and frequency (steps 1, 2 and

3).

Press and hold [D•M] for more than 2 seconds. Frequency blinks once and is saved in the memory.

Press [D•M].

1 2

Scanning:

Radio mode display

Press [D•M] again to cancel and return to the previous source.

Note:

≥You can recall the direct memory when the power

is off.

FM stereo indicator

1 2

≥The display blinks once, and a re-

ceiving station is saved in the memory.

Preset number

≥The 6 strongest available stations will be automatically saved in the

memory under preset number 1 to 6.

≥Once set, the preset stations are sequentially scanned for 5 seconds

each.

≥Press [P. SET "] or [P. SET #]/["] or [#] for the broadcast you

want to listen to. (Press [1] to [6] on the remote control.)

1 2

Note:

≥The new station is overwritten on existing saved

stations after following this procedure.

+ 13 hidden pages