Ozito HTER-600U Original Instructions Manual

HEDGE
TRIMMER

600W 550mm

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Input: 230-240V ~ 50Hz
Motor: 600W
No Load Speed: 1,400/min
Blade Length: 550mm
Max. Cutting Capacity: 20mm

Protection Class: II

Weight: 3.85kg

WHAT’S IN THE BOX

Hedge Trimmer

Blade Cover

HTER-600U

ozito-diy.co.uk

1117

OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work
performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.

Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.

CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk

WARRANTY

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

1. Impact Guard

2. Safety Guard

3. Safety Switch

4. Front Handle

5. Rotating Handle Lock

6. On/Off Switch

7. Rotating Rear Handle

8. Blade Cover

HEDGE TRIMMER

ACCESSORIES:

KNOW YOUR PRODUCT

1 2 3 4 5 6

8

7

1.BEFORE USE

Items Supplied

Please check that the article is complete as specied in the scope

of delivery. If parts are missing, please contact our service centre or
the sales outlet where you made your purchase at the latest within
5 working days after purchasing the product and upon presentation
of a valid bill of purchase. Also, refer to the warranty table in the
service information at the end of the operating instructions.

• Open the packaging and take out the equipment with care.

• Remove the packaging material and any packaging and/or
transportation braces (if available).

• Check to see if all items are supplied.

• Inspect the equipment and accessories for transport damage.

• If possible, please keep the packaging until the end of the
guarantee period.

Danger!

The equipment and packaging material are not toys. Do not let
children play with plastic bags, foils or small parts. There is a
danger of swallowing or suffocating!

Proper Use

Important. This hedge trimmer is suitable for cutting hedges,
bushes and shrubs.

The equipment is to be used only for its prescribed purpose. Any
other use is deemed to be a case of misuse. The user / operator
and not the manufacturer will be liable for any damage or injuries of
any kind caused as a result of this.

Please note that our equipment has not been designed for use in
commercial, trade or industrial applications. Our warranty will be
voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

Caution!
Residual risks

Even if you use this electric power tool in accordance with
instructions, certain residual risks cannot be rules out.
The following hazards may arise in connection with the
equipment’s construction and layout:

1. Lung damage if no suitable protective dust mask is used.

2. Damage to hearing if no suitable ear protection is used.

3. Health damage caused by hand-arm vibrations if the equipment

is used over a prolonged period or is not properly guided and
maintained.

1. Slide the blade cover off
the blade.

The hedge trimmer comes with a blade cover to protect the
blades when storing. The blade cover must be removed prior to
operation.

2. To t, slide the cover back

over the blade.

2. BLADE COVER

3. CHECKS PRIOR TO OPERATION

PREPARATION

Fitting and Removing the Blade Cover

WARNING! ENSURE THE HEDGE TRIMMER IS

DISCONNECTED FROM THE POWER SUPPLY BEFORE
REMOVING COVER AND PREPARING FOR USE.

WARNING! ENSURE THE HEDGE TRIMMER IS

DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.

WARNING! NEVER USE THE HEDGE TRIMMER WITH THE

BLADE COVER FITTED.

1. Check that the blades
are not damaged. if so
the blades will need to be
replaced.

2. Make sure that the safety
guard is attached securely.

Before Using the Hedge Trimmer

WARNING: MAKE SURE THAT THE WORK AREA IS

FREE OF ROCKS, DEBRIS, LINES AND OTHER FOREIGN
OBJECTS.