Ozito CDG-340HK Operating Instructions Manual

CORDLESS HAMMER DRILL

20.4V

OPERATING INSTRUCTIONS

Always Wear Eye, Face & Ear Protection www.ozito.com.au

20.4V

20.4

VOLT

Battery Power: 20.4V
Charge Time: 1 Hour
No Load Speed: 0-700 rpm
Chuck: 10mm, Keyless
Batteries: 2

Features: Adjustable Torque

State of Charge Indicator
Magnetic Screw Strip
Hammer Function
Accessories Included

This Cordless Drill has been designed to comply with the following Australian /
International Standards and any other applicable standards referenced therein:

AS/NZS 3160: 1996 Approval and Test Specification – Hand held

electrical power tools.

AS/NZS 1044: Edition 2, 1995 Electrical motor operated and thermal

appliances for household and similar
purposes, electric tools and similar apparatus.

3

SPECIFICATIONS – MODEL NO. CDG-340HK

2

0

.

4

V

20.4

VOLT

1. Keyless Chuck

2. Hammer Function

3. Torque Adjustment

4. State of Charge Indicator

5. Magnetic Screw Strip

6. Soft Grip

7. Double Ended Screwdriver Bit

8. Battery Pack Release Buttons

9. 20.4V Battery

10. Forward / Reverse Lever

11. Variable Speed Switch

9

8

7

6

10

11

4

3

2

1

5

INTRODUCTION

4

Warning! A battery operated tool with integral batteries or a separate
battery pack must be recharged only with the specific charger for the
battery. A charger that may be suitable for one type of battery may create
a risk of fire when used with another battery.

• Avoid accidental starting. Make sure the switch is in the locked OFF
position before inserting the battery pack. Carrying a tool with your
finger on the switch or inserting the battery pack into a tool with the
switch on invites accidents.

• Disconnect the battery pack from the tool or place the switch in the
locked OFF position before making any adjustments, changing
accessories, or storing the tool. Such preventative safety measures
reduce the risk of starting the tool accidentally.

• When the battery pack is not in use, keep it away from other metal objects.

Read the whole manual carefully and make sure you know how to switch the
tool OFF, in an emergency, before operating the tool. Save these instructions
and other documents supplied with this machine for future reference.

Congratulations on purchasing an Ozito 20.4V Cordless
Hammer Drill. We aim to provide quality tools at an
affordable price. We hope you will enjoy using this tool
for many years.

Your Ozito Cordless Hammer Drill CDG-340HK has
been designed to drill timber, metal, plastic, masonry
and for screw driving. It is intended for DIY use only.

SAFETY INSTRUCTIONS

5

GENERAL

1. Keep work areas clean. Cluttered areas and benches can cause accidents.

2. Consider work area environment. Do not expose your tool to high

humidity or rain. Do not use your tool in damp and wet conditions. Keep
the work area well lit. Do not use your tool where there is a risk of causing
fire or explosion, e.g. in the presence of flammable liquids and gases.

3. Keep children away. Do not allow children, visitors or animals to come
near the work area or to touch the tool or power lead.

4. Dress appropriately. Do not wear loose clothing or jewellery, as these
can be caught in moving parts. Preferably wear non-slip footwear when
working outdoors. Wear protective hair covering to keep long hair out of
the way.

5. Head protection. Always use safety glasses. Use a face or dust mask
whenever the operations may produce dust or flying particles. Wear ear
protection whenever the sound level seems uncomfortable.

6. Guard against electric shock. Prevent body contact with earthed or
grounded surfaces (e.g. pipes, radiators, cookers and refrigerators).
Electric safety can be further improved by using a high sensitivity
(30 mA/30 mS) residual current device (RCD).

7. Do not overreach. Keep proper footing and balance at all times.

8. Stay alert. Watch what you are doing. Use common sense. Do not

operate the tool when you are tired.

9. Secure work piece. Use clamps or a vice to hold the work piece; it is
safer as it frees both hands to operate the tool.

10. Connect dust extraction equipment. If devices are provided for the
connection of dust extraction and collection facilities, ensure that these
are connected and properly used.

11.Remove adjusting keys and wrenches. Always check that adjusting keys
and wrenches are removed from the tool before operating the tool.

12. Extension leads. Before use inspect the extension leads and replace if
damaged. When using the tool outdoors, only use extension leads
intended for outdoor use and marked accordingly.

13. Use appropriate tool. The intended use is described in this instruction
manual. Do not force small tools or attachments to do the job of a heavy
duty tool. The tool will do the job better and safer at the rate for which it
was intended. Do not force the tool.