Ozito BSW-2581 Instruction Manual

SPECIFICATIONS

Motor Power: 250W (S2 15min)
Input Voltage: 220V-240V ~ 50Hz
No Load Speed: 1,400/min
Saw Blade Speed: 900 m/min
Saw Blade Length: 1,400mm
Max. Blade Width: 8mm
Throat Depth: 200mm
Cutting Height: 80mm at 90°
45mm at 45°
Table Size: 305 x 305mm
Table Tilt: -2° to 45°
Dust Adaptor: Ø 36mm
Weight: 17.5kg

BAND SAW

250W 200mm (8”)

INSTRUCTION MANUAL

BSW-2581

WHAT’S IN THE BOX

Rip Fence

Hex Keys

Push Stick

IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It

Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts:

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other
than that specified on the tool.

• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the
instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.

OZITO

Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.

ozito.com.au

0717

Band Saw

ONLINE MANUAL

Scan this QR Code with your
mobile device to take you to
the online manual.

BAND SAW

KNOW YOUR PRODUCT

Before commencing any operations, refer to the Setup and

Adjustment Manual to make sure that the Band Saw has been

Assembled and Setup correctly.

SETUP & PREPARATION

WARNING! TO PREVENT ACCIDENTAL STARTING,

ENSURE THE BAND SAW IS DISCONNECTED FROM THE
POWER SUPPLY BEFORE MAKING ANY ADJUSTMENTS

1. SETUP AND ADJUSTMENTS

1. Tensioning Knob

2. Upper Blade Pulley

3. Upper Door

4. ON/OFF Switch

5. Lower Door

6. Rip Fence

7. Rip Fence Locking Lever

8. Lower Blade Pulley

9. Upper Door Lock

10. Blade Guard Adjustment

11. Blade Guard

12. Upper Blade Guide

13. Saw Table

14. Stabiliser Bar

15. Lower Door Lock

16. Machine Base

0

I

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

0

0

10

0

20

0

30

0

40

0

45

0

17. Blade Guard Locking Knob

18. Blade

19. Table Tilt Locking Knob

20. Table Tilt Locking Lever

21. Pulley Tracking Adjustment Knob

22. Pulley Tracking Retaining Nut

23. Table Support Bolt

24. Push Stick

25. Hex Keys (3, 4, 5mm)

ACCESSORIES

21

22

23

24 25

17

18

19

20

Adjusting the Blade Guard

Rip Fence

2 Rotate the blade guard

adjustment to lower the blade
guide as close as possible
to the work piece to be cut.
The gap should be approx.
2-3mm between the material
and blade guide.

1

Release the rip fence lever

by pulling it upwards.

2

Move the rip fence along the

table, from either the right
or left side, and position as
required.

3

Push the lever down to

secure the rip fence. If the
clip does not give enough
hold, turn it clockwise several
times and then press the
lever down.

4

You must always ensure that

the rip fence is positioned
parallel to the blade.

0

I

0

I

1 Loosen the blade

guard locking knob at
the back of the unit.

3

Secure in position by

tightening the blade
guard locking knob.

Note: Check the setting

before each cut and re­adjust if necessary.