Ozito BSR-7000U Original Instructions Manual
WARRANTY
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
0416
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the
manufacturer mentioned below are limited to either the rectication of said
defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,
the work performed or parts tted will not result in an extension of the
guarantee period, and no new guarantee will become active for the work
performed or parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
BELT
SANDER
800W
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Input: 230V ~ 50Hz
Power: 800W
Sanding Belt Speed: 380m /min
Sanding Surface: 75 x 142mm
Sanding Belt Size: 75 x 533mm
Weight: 3.4kg
BSR-7000U
WHAT’S IN THE BOX
Belt Sander
ozito-diy.co.uk
Sanding Belt
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Front Handle
2 Belt Tracking Knob
3 On/Off Trigger
4 Lock on Button
5 Rear Handle
6 Dust Bag
7 Belt Tensioning Lever
8 Front Roller
BELT SANDER
KNOW YOUR PRODUCT
1. DUST BAG
SETUP & PREPARATION
9 Sanding Belt (tted)
ACCESSORIES
WARNING: ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING STEPS.
2 Ensure the dust bag is closed
before starting operation.
2 Ensure the dust bag is closed
before starting operation.
1 Slide the dust bag
onto the dust ejection
port until it clicks into
place.
1 Unzip the dust bag
and empty the dust
into a bin.
Fitting the Dust Bag
Emptying the Dust Bag
1
7
9
8
2 3 4 5 6
2. SANDING BELT 3. BELT ADJUSTMENT
OPERATION
4. CONTROLS
CAUTION: ENSURE BODY PARTS, CORDS, WORKPIECES
AND ANY LOOSE ITEMS ARE CLEAR OF THE SANDING
BELT BEFORE PERFORMING THE FOLLOWING STEPS.
CAUTION: THE ARROWS ON THE BELT MUST BE
ALIGNED WITH THE MARKINGS ON THE BELT SANDER.
INCORRECT FITMENT COULD CAUSE THE BELT TO
BREAK. BELTS ARE NOT COVERED BY THE WARRANTY.
2 Release the belt tension by
pushing the tensioning lever
all the way towards the front.
2 Remove the belt from the rollers
1 Place the sander on its
left side.
1 Release the belt
tension by pushing the
tensioning lever all the
way towards the front.
4 Once the belt is in the
correct position, pull
the tensioning lever
backwards to secure
the belt.
3 Place the belt over the front and rear rollers.
Fitting the Sanding Belt
Removing the Sanding Belt
It is necessary to ensure the belt is tracking correctly, in a straight line,
to avoid the belt ‘tracking off’ the belt sander’s rollers.
2 Press the on/off trigger to
start the sander and observe
the tracking of the sanding
belt.
4 Adjust the belt until its outer edge is even with the outer edge of
the rear roller. Make sure that the belt does not rub against the rear
guide strip.
1 Turn the sander
upside down and hold
it rmly with one hand.
3 If the belt tracks
outwards, rotate the
tracking knob anticlockwise.
If the belt tracks
inward, rotate the knob
clockwise.
Tracking Adjustment
Loading...