Orion PNVR204 4CH, PNVR208 8CH, PNVR204, PNVR208 User Manual
User
Manual
PNVR204 4CH,
PNVR208 8CH
Full HD NVR
User's Manual PNVR200 series
2
C
opyright
This manual without the manufacturer's approved copy and reprinted partially or in full, or translated into another
language is prohibited.
Limitation of Liability
This product is designed to prevent fire and theft is not the main means. We shall not be liable for accidents or
damage by using this product can result in liability for accidents or damage
In order to improve the performance of the product without prior notice to the product may be a firmware upgrade.
User's Manual PNVR200 series
3
Content
1. Overview ..................................................................................................................................................................... 8
1.1. Safety instruction
.............................................................................................................................................. 8
1.2. Key Features ...................................................................................................................................................... 8
1.3. What's included ................................................................................................................................................. 9
1.4. Front Panel ...................................................................................................................................................... 10
1.5. Rear Panel ....................................................................................................................................................... 10
1.6. Remote Control At a Glance ............................................................................................................................ 11
1.7. Change the remote control ID ......................................................................................................................... 12
2. Installation ................................................................................................................................................................ 13
2.1. HDD Replacement ........................................................................................................................................... 13
2.2. Basic Layout ..................................................................................................................................................... 14
2.3. Precautions...................................................................................................................................................... 14
2.4. Connecting to an external device .................................................................................................................... 14
Connecting to the monitor ......................................................................................................................... 14 2.4.1.
Power connection ....................................................................................................................................... 14 2.4.2.
NVR power connection ............................................................................................................................... 14 2.4.3.
Poe Switching hub power connection ........................................................................................................ 14 2.4.4.
Connecting the camera ............................................................................................................................... 16 2.4.5.
If the distance between the NVR and IP camera is more than 100m ......................................................... 16 2.4.6.
Alarm I/O Connection ................................................................................................................................. 17 2.4.7.
Communication Port ................................................................................................................................... 18 2.4.8.
USB Device .................................................................................................................................................. 19 2.4.9.
Network Connection............................................................................................................................... 20 2.4.10.
Pconnection from a remote network ..................................................................................................... 20 2.4.11.
3. Monitoring ................................................................................................................................................................ 22
3.1. Live Screen at a Glance.................................................................................................................................... 23
Video Window ............................................................................................................................................ 23 3.1.1.
Status bar .................................................................................................................................................... 23 3.1.2.
Timeline ...................................................................................................................................................... 24 3.1.3.
Quick Menu ................................................................................................................................................. 25 3.1.4.
Using the status bar in the live mode ......................................................................................................... 25 3.1.5.
Digital Zooming ........................................................................................................................................... 28 3.1.6.
4. System Setting .......................................................................................................................................................... 31
4.1. To move to the System Setup menu ............................................................................................................... 31
4.2. Camera Setting ................................................................................................................................................ 31
Camera Title ................................................................................................................................................ 31 4.2.1.
Camera Setup .............................................................................................................................................. 32
4.2.2.
User's Manual PNVR200 series
4
Direct Configuration .................................................................................................................................... 32
4.2.3.
Covert Setup ............................................................................................................................................... 33 4.2.4.
Motion Sensor............................................................................................................................................. 33 4.2.5.
Motion area Setup ...................................................................................................................................... 34 4.2.6.
PTZ Settings ................................................................................................................................................. 34 4.2.7.
4.3. Display Setting ................................................................................................................................................. 35
OSD ............................................................................................................................................................. 35 4.3.1.
Monitor ....................................................................................................................................................... 36 4.3.2.
Sequence ..................................................................................................................................................... 36 4.3.3.
To add a sequence ...................................................................................................................................... 36
4.3.4.
To edit a sequence ...................................................................................................................................... 37 4.3.5.
4.4. Audio Setup ..................................................................................................................................................... 37
Audio ........................................................................................................................................................... 37 4.4.1.
Buzzer output .............................................................................................................................................. 38 4.4.2.
4.5. User Setting ..................................................................................................................................................... 39
Management ............................................................................................................................................... 39 4.5.1.
To add a user account ................................................................................................................................. 39 4.5.2.
To edit the user account information ......................................................................................................... 39 4.5.3.
Group Authority .......................................................................................................................................... 40 4.5.4.
4.6. Network Setup ................................................................................................................................................ 41
IP Setup ....................................................................................................................................................... 41 4.6.1.
DDNS ........................................................................................................................................................... 42 4.6.2.
Email ........................................................................................................................................................... 42 4.6.3.
Network Status ........................................................................................................................................... 43 4.6.4.
Network Map .............................................................................................................................................. 43 4.6.5.
Detail Status ................................................................................................................................................ 44 4.6.6.
Security ....................................................................................................................................................... 44 4.6.7.
ENCRYPTION ............................................................................................................................................... 44 4.6.8.
IP FILTER ...................................................................................................................................................... 44 4.6.9.
4.7. System Setting ................................................................................................................................................. 45
Date/Time ................................................................................................................................................... 45 4.7.1.
System Management .................................................................................................................................. 45 4.7.2.
To perform the upgrade ............................................................................................................................. 46 4.7.3.
System information..................................................................................................................................... 47 4.7.4.
Control Device ............................................................................................................................................. 47 4.7.5.
Security ....................................................................................................................................................... 48 4.7.6.
4.8. Storage ............................................................................................................................................................ 49
User's Manual PNVR200 series
5
Disk Information ......................................................................................................................................... 49
4.8.1.
Disk Operations ........................................................................................................................................... 49 4.8.2.
S.M.A.R.T settings ....................................................................................................................................... 50 4.8.3.
4.9. Event Setup ..................................................................................................................................................... 51
Alarm Out .................................................................................................................................................... 51 4.9.1.
ON/OFF Schedule ........................................................................................................................................ 51 4.9.2.
Event Notification ....................................................................................................................................... 52 4.9.3.
Buzzer output .............................................................................................................................................. 52 4.9.4.
Display ......................................................................................................................................................... 52 4.9.5.
Email ........................................................................................................................................................... 53
4.9.6.
FTP .............................................................................................................................................................. 53 4.9.7.
Alarm Sensor ............................................................................................................................................... 54 4.9.8.
Motion Sensor............................................................................................................................................. 55 4.9.9.
Video Loss ............................................................................................................................................... 55 4.9.10.
System Event .......................................................................................................................................... 56 4.9.11.
Disk ......................................................................................................................................................... 56 4.9.12.
Record .................................................................................................................................................... 56 4.9.13.
System .................................................................................................................................................... 57 4.9.14.
Network .................................................................................................................................................. 57 4.9.15.
5. Record Setting........................................................................................................................................................... 58
5.1. To start the Record Setup menu ..................................................................................................................... 58
5.2. Record Setup ................................................................................................................................................... 58
operation Mode .......................................................................................................................................... 58 5.2.1.
Auto configuration ...................................................................................................................................... 58 5.2.2.
Manual configuration ................................................................................................................................. 59 5.2.3.
Continuous Recording ................................................................................................................................. 59 5.2.4.
Size/FPS/Quality Setting ............................................................................................................................. 60 5.2.5.
Schedule Setting ......................................................................................................................................... 60 5.2.6.
Motion Recording ....................................................................................................................................... 61 5.2.7.
Alarm Recording ......................................................................................................................................... 61 5.2.8.
Panic Recording .......................................................................................................................................... 62 5.2.9.
Network Streaming................................................................................................................................. 62 5.2.10.
6. Search ....................................................................................................................................................................... 63
6.1. To move to the Search menu while in monitoring .......................................................................................... 63
6.2. To move to the Search menu while in playback mode ................................................................................... 63
6.3. Search Settings ................................................................................................................................................ 64
TIME Search ................................................................................................................................................ 64
6.3.1.
User's Manual PNVR200 series
6
Thumbnail Search ....................................................................................................................................... 65
6.3.2.
Event Search ............................................................................................................................................... 65 6.3.3.
7. Playback .................................................................................................................................................................... 67
7.1. If you want to play........................................................................................................................................... 67
7.2. Playback screen configuration ........................................................................................................................ 67
Playback channel selection menu ............................................................................................................... 68 7.2.1.
Using the play bar ....................................................................................................................................... 68 7.2.2.
7.3. Bookmarking ................................................................................................................................................... 68
8. Archiving ................................................................................................................................................................... 70
8.1. Using the archive menu during playback ........................................................................................................ 70
8.2. Using the archive menu during monitoring .................................................................................................... 70
8.3. Archive ............................................................................................................................................................ 70
Reserved data management ....................................................................................................................... 71 8.3.1.
Playing the archived data ............................................................................................................................ 71 8.3.2.
Archive devices Setup ................................................................................................................................. 72 8.3.3.
9. Web Viewer .............................................................................................................................................................. 73
9.1. What is the web viewer? ................................................................................................................................. 73
9.2. System Requirements ..................................................................................................................................... 73
9.3. connection ....................................................................................................................................................... 73
To connect to the nvR from inside .............................................................................................................. 73 9.3.1.
To connect to the nvR from outside ........................................................................................................... 73 9.3.2.
9.4. Live .................................................................................................................................................................. 75
Switching the split mode............................................................................................................................. 76 9.4.1.
To save the video ........................................................................................................................................ 76 9.4.2.
Print ............................................................................................................................................................ 76 9.4.3.
Screen capture ............................................................................................................................................ 76 9.4.4.
Activex Settings ........................................................................................................................................... 77 9.4.5.
Status tab .................................................................................................................................................... 77 9.4.6.
Log tab ........................................................................................................................................................ 77 9.4.7.
PTZ tab ........................................................................................................................................................ 78 9.4.8.
9.5. Search .............................................................................................................................................................. 79
Search Viewer at a Glance .......................................................................................................................... 79 9.5.1.
Search by time ............................................................................................................................................ 80 9.5.2.
Search by event ........................................................................................................................................... 80 9.5.3.
9.6. Setup ............................................................................................................................................................... 80
Setup Viewer at a Glance ............................................................................................................................ 81 9.6.1.
Camera ........................................................................................................................................................ 81 9.6.2.
User's Manual PNVR200 series
7
Camera Setting ............................................................................................................................................ 81
9.6.3.
Covert Setting ............................................................................................................................................. 82 9.6.4.
Motion Setting ............................................................................................................................................ 82 9.6.5.
PTZ Setting .................................................................................................................................................. 83 9.6.6.
Display ......................................................................................................................................................... 83 9.6.7.
OSD Setting ................................................................................................................................................. 83 9.6.8.
Monitor Settings ......................................................................................................................................... 83 9.6.9.
Audio ...................................................................................................................................................... 83 9.6.10.
User ........................................................................................................................................................ 83 9.6.11.
Network .................................................................................................................................................. 84
9.6.12.
System .................................................................................................................................................... 85 9.6.13.
Storage ................................................................................................................................................... 86 9.6.14.
Event ....................................................................................................................................................... 87 9.6.15.
Record Setup .......................................................................................................................................... 89 9.6.16.
10. Mobile Viewer ..................................................................................................................................................... 92
10.1. nviewer ............................................................................................................................................................ 92
nviewer specification .............................................................................................................................. 92 10.1.1.
Using the nviewer on iPhone .................................................................................................................. 92 10.1.2.
To connect to NVR with nviewer ............................................................................................................ 92
10.1.3.
Using nviewer with android.................................................................................................................... 95 10.1.4.
To connect to NVR with nviewer ............................................................................................................ 96 10.1.5.
11. Archive Viewer ..................................................................................................................................................... 99
11.1. Getting started with the backup Player .......................................................................................................... 99
11.2. Backup Player at a glance .............................................................................................................................. 101
12. Appendix ............................................................................................................................................................ 104
12.1. Specification .................................................................................................................................................. 104
12.2. Compatible hdd Specifications ...................................................................................................................... 105
12.3. Troubleshooting (FaQ) .................................................................................................................................. 106
User's Manual PNVR200 series
8
1. Overview
1.1. Safety
instruction
The Company shall not have any responsibility for any accident or damage that may incur during the use of the
product.
For your safety, we provide a few instructions about installation, manipulation, cleaning, assembly/disassembly of the
product as below. So please read carefully and comply with the instructions.
Before installation
Comply with the following instructions to prevent a fire, explosion, system failure or electric shock.
Remove the power supply module before proceeding.
Check the input voltage (AC100V–AC240V) to the power supply module before connecting it.
Keep the product away from humidity.
Ensure that all devices connected to the product should be properly earth-grounded.
In operation mode
Comply with the following instructions to prevent a fire, explosion, system failure or electric shock.
If you need to open the cover, consult with a service person who could help you do what you want to do.
Do not connect multiple devices to a single power socket.
Keep the product away from dust or too much combustible substances (ex: propane gas).
Do not touch it with wet hand.
Do not insert a conductor in the vent of the ventilation system.
Do not apply excessive force to unplug the power cord.
Disassembly & Cleaning
When cleaning on the surface, use a dry cloth.
Do not wipe the product using water, paint thinner or organic solvents.
Do never dismantle, repair or modify the product by your own.
During installation
To prevent an accident or physical injury and to operate NVR properly, please comply with the followings:
Secure at least 18 centimeter of distance between cooling fan and wall for a proper ventilation.
Install the product on a flat surface.
Keep it away from direct sunlight or excessive temperature.
While in use
Do not apply force to or shake it while using it.
Do not move, throw away or put excessive force to it.
Using any unrecommended HDD may cause a system failure. Check the compatibility list and use only
compatible HDDs.
{system failure or data loss caused by an incompatible HDD will void your warranty.}
CAUTION
Replaceable batteries
Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.
Warning to service personnel
Double pole/neutral fusing
Ethernet Instruction
This equipment is indoor use and all the communication wiring are limited to inside of the building.. or similar word.
1.2. Key Features
This product allows you to receive audio and video signals from a max of 4/8 CH Full HD(1080p) network camera
before saving them to the internal HDD. Besides, you can also transfer them to an external device that can be
monitored on your PC or mobile phone remotely.
Display the video from up to 4/8 CH 1080p network camera in real time (Max 120/240 fps)
Save the video from up to 4/8 CH 1080p network camera in a max of 8Mbps (Max 120/240fps)
User's Manual PNVR200 series
9
Play up to 4/8 CH 1080p video in real time (Max 120/240 fps)
H.264 BP/MP/HP network camera supported
(BP: Baseline profile, MP: Main profile, HP: High profile)
Support PoE(for camera) for all channel
‘Plug & Display’ camera connection
Protect the IP camera via secured closed circuit LAN environment
Auto notification with self diagnosis (HDD S.M.A.R.T, temperature, network connection status, fan error, etc.)
Dual streaming supported for a remote display
Auto resolution & FPS adjustment for a remote service
External eSATA HDD supported (For Video Recording)
Various search methods (time, event, bookmark and thumbnail)
Mass storage backup via USB port or FTP server
Dedicated smart phone applications that can be used with iPhone and iPad or on Android OS
1080p Full HD GUI
1.3. What's included
Mouse x1
Remote Control x1 &
Batteries (AAA x2)
Screws (For fixing HDD)
User manual CD
Power Cable x2
Quick Guide
Adapter cable retainer clip x2
DC 12V Apaptor
DC 48V Adaptor
User's Manual PNVR200 series
10
1.4. Front Panel
Name
Description
IR Remote
Controle Re
Receive the signal from the remote control.
USB Used for connecting USB storage or mouse
Status LED
Show the status of power, recording or network connection together
with the corresponding alarm
1.5. Rear Panel
No.
No. Name
Description
1
CAM1~CAM8
Ethernet ports used for connecting the network camera video and power.(Can supply
power to cameras with PoE function)
2
WAN(UPLINK)
Network port for connection to the Internet, router or hub.
3
AUDIO IN
Microphone connection port.
4
ALARM OUT
Alarm output device connection port.
5
RS-485
Communications port for connecting peripherals such as system keyboard.
6
Power Switch
NVR power switch. Plug the power cord and turn this switch on.
7
DC 12V
NVR power input port. Connect to a 12V adaptor
8
RS-232C
Signal connection port for POS and ATM. !Scheduled to be upgraded.
9
ALARM IN
Alarm input signal port.
10
AUDIO OUT
Port for speaker connection.
11
HD MONITOR
Port for connecting a full HD(1920x1080) supported monitor.Use the HDMI cable to
connect with a 1080p 60Hz monitor.
12
LAN(DOWNLINK)
Exclusive Port dedicated to connect the NVR Hub. (Do not share with other device.)
13
DC 48V
Power input port for the camera (PoE compliant). Connect to a 48V adaptor.
User's Manual PNVR200 series
11
1.6. Remote Control At a Glance
User's Manual PNVR200 series
12
1.7. Change the remote control ID
The remote control will be active only if the remote control ID matches with that specified on the NVR.
If multiple NVRs are installed on one place and you have just a single remote control, use the ID button to set the
remote control ID.
Only the ID-matching NVR can be controlled.
1. From <SYSTEM> - <CONTROL DEVICE> under the System Setup menu, set the <REMOTE CONTROLLER ID>
and press <APPLY>.
Select between 00 and 99. For more details, refer to <SYSTEM SETUP>.
The remote control will be active only if the remote control ID matches with that of the NVR's system ID
2. Press the [id] button on the remote control. The default remote control ID is 00.
3. Use the number buttons to provide a two-digit ID. If you want to enter 01, for instance, enter the number 0
and 1 in sequence.
Check if the remote control ID is set properly by manipulating the remote control.
4. To reset the ID to 00, press and hold the [ID] button.
User's Manual PNVR200 series
13
2. Installation
2.1. HDD Replacement
User can replace hard disk if existing one reaches its full capacity or becomes problematic.
1. Remove the bracket screw on the bottom of the
NVR.
2. Hold the bracket handle in the middle and pull it out
to separate the bracket from the main unit.
3. Install the HDD on the separated bracket and fasten
4 screws on both sides to secure the HDD.
! When installing HDD, make sure to install in the
correct direction.
4. Insert the bracket installed with HDD back into the
main unit.
5. Fasten the bracket screw removed earlier.
User's Manual PNVR200 series
14
2.2. Basic Layout
2.3. Precautions
To secure recording stability from an overloaded network traffic, hacking attempt or DoS (Denial of Service) attack,
only the direct cable connection between camera and NVR is allowed.
! Using a hub is allowed only for extending single channel for extended transfer range to 100m each.
Any access from an outside PC to the IP camera will be strictly prohibited for the purpose of secure operation.
! Signal connection for POS and ATM is scheduled to be upgraded later.
2.4. Connecting to an external device
Connecting to the monitor 2.4.1.
The product supports 1080p 60Hz monitors with HDMI connection and 1920x1080 resolutions DVI monitors only.
Connect the HDMI cable between HDMI output port in the bottom rear panel and HDMI port of the monitor, or use
the HDMI to DVI cable to connect to the DVI port of the monitor.
Power connection 2.4.2.
Two adaptors are provided: one for NVR operation (DC 12V), and the other for PoE (Power Over Ethernet, 48V).
NVR power connection 2.4.3.
Plug the provided DC 12V adaptor in the rear power port of the NVR.
Poe Switching hub power connection 2.4.4.
Plug the provided DC 48V adaptor in the rear power port of the NVR.
When done, attach the adaptor cable clip to the rear panel and insert the cable in.
User's Manual PNVR200 series
15
Make connection when the power is not applied yet.
Arrange up the cables and be careful not to peel off the cable coating.
Do not place the power cord under the carpet or rug. The power cord is usually earth-grounded. However,
even if it's not earth-grounded, do never modify it on your own for earth-grounding.
Do not insert multiple devices in a single power socket. Otherwise, it may cause a power overload.
For stable power supply, this product provides two separate adaptors and two corresponding AC cords by
factory default. Make sure all cables are connected properly.
User's Manual PNVR200 series
16
Connecting the camera 2.4.5.
You can connect a PoE-featuring IP camera to the rear [CAM1]~[CAM8], RJ45 port using the CAT5 10/100Mb Ethernet
cable without a separate power source.
If the IP camera provides the alarm I/O port or Audio I/O port, you can make alarm or audio connection. For
more details, refer to the user manual of the IP camera.
The Ethernet connection is effective within 100 meter in distance. Beyond that, you may encounter a data
loss or failure to connect to the camera. If you need to make cable connection of longer than 100 meters,
use a separate PoE extender for cable extension.
The total power consumption of the IP cameras should not exceed the rated power capacity of the 48V PoE
adaptor. Beyond that, the video may not be played properly or no video will be displayed at all. If this is the
case, use a separate (additional) power source for supplying power to the cameras.
Even if total power requirement meets PoE device’s power capacity, a camera of more than 15W power
requirement per a port cannot be used.
Each camera’s power consumption can be checked on the network map screen, and total power
consumption should consider camera's maximum possible consumption with optional accessories (such as IR
/ heater device).
For stable operation, a dedicated communication line is established for IP cameras in the same network. This
is why network router or hub connection is not allowed.
If the distance between the NVR and IP camera is more than 100m 2.4.6.
You may extend the transfer range by connecting a switching hub or PoE device between the Ethernet port and IP
camera if desired distance is longer than 100m.
User's Manual PNVR200 series
17
Connecting cameras directly to a general switching hub requires camera connected to a separate power
supply.
A switching hub connected for extending transfer range of a single channel should be connected to one
camera only.
Alarm I/O Connection 2.4.7.
To connect the alarm input signal
Connect the signal line of an alarm input device such as sensor to the rear [ALARM IN] port.
1. While pressing and holding the [A1] or [A2] port button in the rear bottom of the NVR, insert the alarm signal
cable in the hole under the button.
2. Insert the grounding wire in the [GND] port.
3. To ensure secure connection, release the button and pull out the wire to check if it's not pulled out.
4. To remove the wire, pull it out while holding the upper button.
User's Manual PNVR200 series
18
To connect the alarm output signal
Connect the signal line of an alarm output device to the rear [ALARM OUT] port.
1. Check the relay output type of Normal Open or Normal Close before selecting a proper type (N/O or N/C).
While holding the [N/O] or [N/C] button, arrange the alarm signal cable through the hole under the button.
a. NO(Normal Open) : Normally Open but switching to Close if an alarm out occurs.
b. GND : Insert the grounding wire.
c. NC(Normal Close) : Normally Close but switching to Open if an alarm out occurs.
2. Insert the grounding wire in the [GND] port.
3. To ensure secure connection, release the button and pull out the wire to check if it's not pulled out.
4. To remove the wire, pull it out while holding the upper button.
Communication Port
2.4.8.
RS-485 connection
Connect the keyboard controller.
You can connect a text-in device such as POS or ATM. After connecting the control device, be sure to match the
connection settings between NVR and device. Make communication settings in <CONTROL DEVICE>.
1. Use the signal wire to make connection between [D+] of the terminal block plug and [D+] of the keyboard
controller.
2. Make connection between [D-] of the terminal block plug and [D-] of the keyboard controller.
3. Make connection between [GND] of the terminal block plug and [GND] of the keyboard controller.
a. For RS-485 connection, refer to the user manual of the keyboard controller.
b. Signal connection for POS and ATM is scheduled to be upgraded later.
RS-232 connection
You can connect a text-in device such as POS or ATM.
For connection of the text-in device, refer to the user manual of the text-in device.
Signal connection for POS and ATM is scheduled to be upgraded later.
Audio device connection
You can connect an audio output device such as speaker amplifier.
Connect the audio input device such as microphone to the rear Audio In port, connect the audio output device such as
speaker amplifier to the Audio Out port.
User's Manual PNVR200 series
19
USB Device 2.4.9.
You can connect and use USB storage devices for backup of recorded video, saving snapshots, firmware updating,
You can also connect the USB mouse to control all operations of the NVR.
! If you need to connect a USB HDD with a high power consumption, it is recommended to use a separate power
source for that HDD.
User's Manual PNVR200 series
20
Network Connection 2.4.10.
Pc connection in the local network
You can connect NVR to a PC in the same network and control or manipulate it on the PC monitor
1. Connect the [WAN(UPLINK)] port in the rear panel to the router or hub.
2. Connect the local PC to the router or hub.
3. Enter the address in the address bar (web browser) of the local PC or of the dedicated software program
in the format of “http://iP address:web service port ”.
(Ex : http://192.168.0.23:8080) The web service port is set to 8080 by default. From the Network Setup
screen, you can change the port number.
4. Provide the ID and password before logging in. Then, you can view the monitoring screen.
Access ID (factory default) : ADMIN, P/W : 1234.
! For security purpose, change the password before you use the product for the first time after purchasing it.
Pconnection from a remote network 2.4.11.
You can connect NVR to a PC or mobile device in the same remote network and control or manipulate it on the
monitor of the PC or mobile device
User's Manual PNVR200 series
21
1. Connect the [WAN(UPLINK)] port in the rear panel to the router
2. Connect the [WAN(UPLINK)] port of the router directly to the fixed IP LAN cable, or connect it to the
ADSL modem.
3. If using the router, set the port forwarding and enter the DDNS address in the address bar (web
browser) of the remote PC, or of the dedicated software program or mobile phone. For the IP and DDNS
address settings, refer to “Network Setup”.
4. If the MAC address of the NVR is 00-11-5F-12-34-56 and the web port number is 8080, enter
"http://00115f123456.dvrlink.net:8080" in the address bar of the web browser.
If you have renamed DDNS as “mydvr”, you can make network connection at
http://mydvr.dvrlink.net:8080.
User's Manual PNVR200 series
22
3. Monitoring
START
1. Connect the adaptor to the power input port in the
rear panel of NVR.
! Make connection when the power is not applied
yet.
2. Turn on the power switch in the rear panel of NVR.
With a beep, the logo screen appears several
seconds after the front LED turns on.
3. When the booting process is completed, the live
screen then the login screen appears.
Log In
To manipulate or access the menus of NVR, you should
have logged in.
1. When the system starts, the login screen appears.
2. Select a user and provide the password.
The default password of the "ADMIN" account is
"1234".
3. Click <ok>.
If the login information is correct and valid, you will
see the live screen.
! For security purpose, change the password before
you use the product for the first time after
purchasing it.
Log Out
To prevent unauthorized access, it is recommended to log
out when you leave the screen.
! Hover the cursor near the bottom of the screen to
display the menu.
1. In the monitoring screen, click <MENU> in the
bottom left corner of the screen to <LOG OUT>, or
press the [LOG OUT] button on the remote control.
2. Access to SEARCH / ARCHIVING / SYSTEM SETUP
/RECORD SETUP / SHUTDOWN will be restricted.
System Shutdown
1. In the monitoring screen, click <Menu> in the bottom
left corner of the screen to <SHUTDOWN> the
system, or press the [POWER] button on the remote
control.
2. Use the virtual keyboard to enter the password.
3. Be sure to turn off the power switch in the rear
panel.
! If you turn off the system in an abnormal manner
such as removing the power cord while the system is
in operation, the disk will have or increase the bad
sectors, causing data loss and shortened life cycle of
the disk.
User's Manual PNVR200 series
23
3.1. Live Screen at a Glance
The live screen largely consists of three components: video window, status bar and timeline zone.
Video Window 3.1.1.
Icons used in the video window.
Item Description
Camera ID
Show the camera ID.
Record
Mode Icons
Displayed if an event recording is reserved.
Display the status of the continuous recording.
Display the recording status when an alarm occurs.
Display the recording status when a motion event occurs.
Display the status of the emergency recording.
Audio I/O
Icons
The audio signal of the connected camera is outputting.
The audio signal is transferring to the connected camera via the microphone.
Motion
Detection
Icon
A motion is detected by the connected camera.
Status bar 3.1.2.
Press the ▼ button on the remote control, or place the mouse in the lower area of the screen to display the status
bar.
User's Manual PNVR200 series
24
Item Description
Menu
Button
Select one of the system setup, search and backup menu items before
accessing it.
User ID
Show the ID of the user who has currently logged in
Screen
Control
Buttons
Edit the screen layout to show the status bar and timeline at all times or
only when the mouse cursor hovers on the status bar/timeline.
Select a split mode.
Select Auto Sequence or Special Split Mode.
Display or hide the OSD menu on the screen.
PTZ
Move to the PTZ screen. You can control the PTZ operations of a PTZcompliant cameraon the PTZ screen.
Zoom
Move to the Digital Zoom.
Quick Log
Display the log list of the recent recording events.
Audio
Channel
Selection
Button
You can use the camera supporting the audio input to listen to the audio.
Microphone
Channel
Selection
Button
Select a camera to which the audio signal will be transferred from the
connected
microphone.
Panic
Record
Start the panic recording.
Alarm
Indicator
Turns on if an event occurs. It does not turn on if no reaction to the event is
yet defined.
Click this to check the information of the event that occurred.
Network
Connection
Status
Check if network connection is made via an external PC or mobile device.
Click this to view the details of the concurrent users and to check the
network connection status. For more information, refer to "Network
Setup".
Disk Space
Show the disk space information. If you have set the disk overwrite mode, it
will be displayed "OW" (Over Write) from the start point of the overwriting.
Click this to view the details of the disk status. For more information, refer
to "Record Setup".
Date &
Time
Display the current time and date.
Timeline 3.1.3.
Press the [▶] button on the remote control or move the cursor to the right of the screen to display the timeline.
Double-click the timeline to move to the video screen. Drag and drop it to make backup or event search for the
specified area.
User's Manual PNVR200 series
25
Item Description
Timeline Date
Display the date of the current timeline.
Click this to select a desired date of the timeline.
Expand/Collapse
the timeline
Expand or collapse the timeline.
Navigation
through
Timeline
Navigate through the timeline.
You can also use the mouse wheel to do the navigation.
Timeline Bar
Display the recording data with time. The color of each bar indicates
the following:
~ Green : Continuous Recording
~ Red : Alarm Recording
~ Blue : Motion Recording
~ Yellow: Panic Recording
Quick Menu 3.1.4.
Item
Description
Channel No
Display the number of the current channel.
Play
Start playing the video of the selected channel from the specified time.
Zoom
Operates (digital) zooming on the selected channel.
Snapshot Capture
Capture the current live video and save it in the .jpeg format.
Then, you can save the captured video in the HDD or export it to an
external USB memory device.
Audio ON/OFF
Turn on or off the audio signal of the selected channel.
Microphone ON/OFF
Turn on or off the microphone signal of the selected channel.
ONE PUSH
Automatically adjusts the focus, within the camera’s focus range.
It is available only if supported by the connected camera.
Using the status bar in the live mode 3.1.5.
Selecting a split mode
Click a desired split mode from 1, 4, 9, 16, 6 and 8 split
screen. Or press the [DISPLAY] button on the
remote control until a desired split mode is displayed.
ν 8CH NVR model support only 1-, 4-, 9-, 6- and 8-split
screen modes.
Auto sequence
Click the Sequence button in the status bar, or press the
[SeQ] button on the remote control to perform the
specified sequence mode.
You can configure the sequence settings in <SeQUence>.
For details, refer to “Sequence”.
User's Manual PNVR200 series
26
Controlling PTZ
You can control PTZ cameras connected to each channel.
Use the mouse to click PTZ button on the status bar, or
press the [PTZ] button of the remote control to initiate
the predefined sequence.
In PTZ mode, use buttons on the screen to control PTZ or
use [ZOOM], [FOCUS] and [PRESET] buttons of the
remote control.
Pan/Tilt control
Use mouse to rotate the PTZ camera in the direction of
up/down/left/right and diagonal directions.
You can control Pan/Tilt with [▲▼►◄] buttons of the
remote control
Zoom / Focus Control
You can control the PTZ camera for zooming and focus
adjustment.
Click <ONE PUSH FOCUS> button to adjust the
camera’s focus automatically.
If the connected camera supports manual iris adjustment,
you can adjust the iris setting.
You can control by using [ZOOM] and [FOCUS] buttons
of the remote control.
User's Manual PNVR200 series
27
Click <PROPERTY> and change to a desired setting of
the PTZ camera (for auto focus, auto IRIS, pan/tilt speed,
zoom speed, focusing speed, iris speed).
! Depending on the PTZ camera manufacturer and model,
some of the PTZ properties may not be applicable.
CH : Selects the PTZ camera connected to the NVR.
> PRESET (No. / Name) : You can select the
preset number and name.
! Up to 255 presets can be selected for a PTZ camera,
while up to 16 presets can be registered to one NVR.
Control the Camera’s PTZ while watching the video. Press the <Set> button to append the preset.
Click the shortcut icon to move to the corresponding PTZ (preset) position.
Click Delete icon to delete the corresponding preset.
! PRESET: Memorizes the PTZ camera’s framing for direct access at a later time.
SCAN/TOUR
1. Select <Scan> and click the <on> button.
2. Click the < > icon
3. Select a user-defined preset and register it.
! DWELL : Sets the dwell time of 00 seconds before
moving to the next preset location.
<SCAN> function patrols two preset positions at the
specified speed and interval for back-and-forth
monitoring.
4. Select <TOUR> and click the <ON> button.
5. Click the < > icon.
6. Select a user-defined preset and register it.
! DWELL: Sets the dwell time of 00 seconds before
moving to the next preset location.
<TOUR> function patrols multiple presets in order
(PRESET1 ; PRESET 2 ; PRESET 3 ;…) for automated
patrolling monitoring.
User's Manual PNVR200 series
28
Digital Zooming 3.1.6.
You can enlarge the monitoring screen for better view.
Zooming will enlarge the video of the selected channel. If no channel is selected, channel 1 will be zoomed.
1. Click Zoom in the status bar or move the cursor to a
desired channel and right-click it to display the
context menu. Select <ZOOM>. You can also press
the [ZOOM] button on the remote control.
2. Move to the zoom control screen. When the menu
bar appears in the right bottom, use the buttons to
control the zooming.
: Select a channel to zoom in/out.
: Zoom out the current (enlarged) image step
by step.
: Enlarge the current image step by step.
Zoom Box : Use the yellow box to move to or select a
desired zooming area.
: Exit the zooming screen and return to the
live screen.
By its nature, digital zooming which interpolates original
image to have it enlarged, it may produce less clear
image compared to the original.
For clearer zooming, it is recommended to use a camera
that supports optical zooming.
To check the event log
You can check the log of the events that occurred.
1. Click Log to display the “EVENT LOG” window.
The log list is sorted with the latest one on top.
2. Double-click a desired log to display the event video.
You will move to the play screen of the selected log.
To select an audio input channel
Select a channel from which the audio signal will be
received.
>CHANNEL : Produces the selected channel’s audio,
regardless of the split screen mode.
>LINK TO FULL SCREEN : When switching the NVR
display mode to view one channel (Single Split), it
produces the selected channel’s audio.
ν A camera supports audio input should be used, and the
NVR is connected to a speaker.
User's Manual PNVR200 series
29
To select an audio output channel
You can select a camera outputting the voice signal from
the microphone that is connected to NVR.
To check the alarm status
You can check the alarm status of each camera.
Click <OK> to close the window.
To check the network status
You can check the network connection status.
Click <OK> to close the window.
! For more information, refer to "Network Status".
To check the disk status
You can check the storage space of the current disk and
check also if there is any problem with the disk.
Click <OK> to close the window.
! For more information, refer to "Disk Information".
Saving Captured Snapshots
You can capture the current video screen and save or
export to a connected storage device.
1. Select a channel fi rst, and right click to open popup
menu, and select <SNAPSHOT> menu item, or press
the [SNAPSHOT] button of the remote control.
User's Manual PNVR200 series
30
2. Connect a storage device, and click <EXPORT>
button.
To save the captured image onto the built-in HDD,
press the <RESERVE> button.
Saved image can be found in the “Archiving >
Reserved data management” and can be backed up.
3. Enter the <TAG NAME> and <MEMO> and press
<BURN> or <ERASE & BURN> button.
A progress bar appears and indicates the
progress of exporting to storage device.
BURN : Snapshot is stored in the connected USB
storage device.
ERASE & BURN : Deletes all fi les in the
connected USB storage and then saves the
snapshot.
Note that <ERASE & BURN> option erases all
data in the USB storage device and will not be
restored once deleted.
Loading...