Oregon Super 20 User Manual

Oregon ® Super 20 Series

20LP, 21LP, 22LP is the #1

.325”-pitch pro chain

20LP makes fast bias cuts

• 6% faster than it’s

predecessor, 33LG

20LP makes faster bucking cuts

• 8% faster than 33LG

20LP makes the fastest boring cuts

• 18% faster than 33LG

Finish faster with

Super 20 chain

Top features make Super 20 Series chain the top performer

The difference is right on top: aggressive chisel cutters that cut fast and smooth

Lubriwell™ holes help carry oil around the full length of the bar’s rails

Top-plate witness mark helps make sharpening easier and indicates the chain’s end-of-life

Vibe Ban™ chassis reduces vibration at the saw’s handles by 25% or more

Offset depth gauges reduce roughness and help prevent the cutter from diving into the sidewall of the cut

The LubriLink™ cavities in tie straps on BOTH sides of the chain help keep more oil where it’s needed: on the chain and bar

In the most popular cutting mode: nose-clear bucking, 20LP chain cut 8% more wood than 33LG. 20LP outperformed 33LG on boring cuts and bias cuts as well. Test wood used: Douglas Fir, test saw used: Husqvarna 340 with a 16” bar.

Super 20 chain makes your chainsaw a more efﬁ cient cutting machine, one that does more cutting per saw horsepower

Chain Recommended Recommended Pitch Type Gauge Bar Lengths Saw Sizes

Super 20 Series Chains – the #1 pro chain for .325”-pitch saws

.325” 20LP .050” 11” - 20” 2.3 - 3.8 cu. in. 21LP .058” (28 - 50 cm) (38 - 62 cc) 22LP .063”

Multi-Cut™ 20 Series Chains –

.325” M20LP .050” 11” - 20” 2.3 - 3.8 cu. in. M21LP .058” (28 - 50 cm) (38 - 62 cc) M22LP .063”

With professional users it’s all about performance,

for use in highly abrasive conditions

Know your saw chain, and know your saw chain’s manufacturer

Did you know that in one minute of operation, each link on your cutting chain will travel

and for professionals who use .325”-pitch saws, the top performing chain is

Oregon

Super 20 series:

more than half again as far as the piston in a two-cycle engine will at 10,000 rpm? And did you know that each of those chain links will make 32 reversals of direction – per second! Saw chain may look like a simple product, but

serious injury to the saw operator or bystanders. These are NOT low-kickback chains. DO NOT use Oregon chain unless you have experience and specialized training for dealing with kickback. Saw chain with lower kickback potential is available. Users of low-kickback 33SL, 34SL and 35SL chains should be aware that switching to a professional Super 20 Series chain will increase the risk of injury due to kickback. Oregon 33SL, 34SL and 35SL will continue to be available as a low-kickback (blue label) offering for users of .325”-pitch saws.

Oregon® Super 20 chains may be capable of kickback that could result in

20LP, 21LP or 22LP

it’s not. In today’s growing global economy new manufacturers are emerging for many products. When it comes to the chain on your chainsaw, it’s important to know your chain’s manufacturer. For over 55 years, Oregon Cutting Systems has been the world leader in saw chain innovation, patents and expertise.

20LP, 21LP and 22LP.

Oregon Cutting Systems Group, Blount Inc. • www.oregonchain.com • 503-653-8881 • A107039 AA 0805