Oregon Scientific Global 5-Day Weather Adviser I, I300 User Manual

1

EN

Global 5-Day Weather Adviser I

Model: I300

USER MANUAL

CONTENTS

Introduction .................................................................. 2

Packaging Contents ..................................................... 2

Overview ....................................................................... 3

Front View ..................................................................3

Back View ...................................................................3

USB Communications Hub .........................................4

Outdoor Thermo Sensor .............................................4

Getting Started ............................................................. 5

Set Up Remote Sensor .............................................. 5

Set Up Main Unit ........................................................6

Set Up Software (First Time Use) ................................

6

Windows XP ............................................................... 6

Windows Vista ............................................................

7

Disable Sleep Mode ...................................................... 7

To Disable Sleep Mode on Computer (Windows XP) .....7

To disable sleep mode on computer (Windows Vista) ...7

Set Up USB Communications Hub .............................7

Main Unit Screen Display ........................................... 8

To

Change Display Modes ........................................ 8

To

View Different Warning Messages ........................ 8

Weather Forecast ....................................................... 8

Clock ............................................................................. 8

To Manually Set Clock ............................................... 8

Alarm .............................................................................9

To

Set Alarm .............................................................. 9

To

Activate / Deactivate Alarm ...................................9

To

Silence Alarm ........................................................ 9

Backlight ...................................................................... 9

Reset ............................................................................. 9

Specifications ..............................................................9

Main Unit ....................................................................9

Indoor Temperature ....................................................

9

Indoor Relative Humidity ............................................9

Usb Communications Hub ........................................10

Outdoor Remote Thermo Sensor ............................. 10

Clock / Calendar ....................................................... 10

Precautions ................................................................ 10

About Oregon Scientific ........................................... 11

EU-Declaration of Conformity .................................. 11

FCC Statement ........................................................... 11

Declaration of Conformity ........................................ 12

2

EN

INTRODUCTION

Thank you for selecting the Oregon Scientific™ Global
5-Day Weather Adviser I (I300).

The weather station is capable of connecting to a PC
computer using the USB connection. By installing the PC
software, world cities can be user-selectable. The software
can also download and display the latest weather data and
real time of the selected cities.

For full details see software instructions.

PC system requirements

The minimum system requirements for use of the software is:

• Operating system: Microsoft Windows XP SP2 or
Vista

• Processor: Pentium III or 4 (recommended)

• RAM: Min. 256 MB or 512 MB (recommended)

• Hard disk free space: Min. 256 MB or 512 MB
(recommended)

• Screen Display Area:1024 x 768 pixels
(recommended)

NOTE

The USB is only used for the uploading and
downloading of weather data. It is not to be used for
charging battery power.

NOTE

Please keep this manual handy as you use your
new product. It contains practical step-by-step instructions,
as well as technical specifications and warnings you
should know about.

PACKAGING CONTENTS

1x Main Unit

1x USB

Communications

Hub

1x Remote

Sensor

3 x AA

UM-3 1.5V

batteries

1x USB Cable

2 x AAA

UM-4 1.5V

Batteries

3

EN

1

2

3

4

6
7

8
9

5

1

2
3

4
5

6
7

8

9

11

10

12

13
14

OVERVIEW

FRONT VIEW

1. : Indicate AM / PM

2. : Information signal reception indicator

3. : Indicate outdoor sensor reception status

4. Current outdoor temperature (home environment)

5. : Sensor batteries low

6. Cu rrent indoo r temperature / humidity (ho me
environment)

7. Today’s regional weather forecast (user selected
city)

8. Next 4 day regional weather forecast with HI / LO

temperature (user selected city)

9. SNOOZE · MESSAGE: Activate snooze alarm; turn on
backlight; toggle between weather warning / advisory /

clock message

10. City name / Clock / Calendar / Scrolling warning
message

11.

: Indicate alarm time is displayed

12. : Indicate daily alarm is On

13. : Main unit batteries low

14. Today’s regional HI / LO temperature (user selected
city)

BACK VIEW

4

EN

1

1

3

2

1. ALARM : Change settings / display; activate /
deactivate alarm; set alarm

2. MODE: Toggle between temperature and humidity
display, set clock

3. Battery compartment

4. ºC / ºF: Select temperature unit

5. Wall mount hole

6. : Initiate sensor search; increase value of the
setting; display next city’s data

7. : Decrease value of the setting; display previous
city’s data

8. Collapsible table stand

9. RESET: Reset unit to default settings

USB COMMUNICATIONS HUB

FRONT VIEW BACK VIEW

1

1
2

3

S

E

A

R

C
H

Front View:

1. LED status indicator: Blink dur ing registrat ion
with main unit or during sensor search; indicate a
successful USB connection

Back View:

1. SEARCH: Initiate search for remote sensors

2. RESET: Reset USB Communications Hub to default
settings

3. USB

port: Upload / download records to / from PC

OUTDOOR THERMO SENSOR

FRONT VIEW BACK VIEW

Front View:

1. LED status indicator: Blink when transmitting a
reading

5

EN

Back View:

1. RESET: Reset unit to default settings

2. Channel Switch

3. Battery compartment

GETTING STARTED

SET UP REMOTE SENSOR

1. Slide open the battery door.

2. Select channel.

3. Insert the batteries, matching the polarities (+ / -) and
press RESET.

4. Close the battery door.

NOTE

• Install batteries in the remote sensor before installing
the USB Communications Hub and main unit.

• Press RESET after each battery change.

5. Secure the sensor in the desired location using the
wall mount bracket.

6. Press SEARCH on USB Communications Hub to
initiate search and start receiving data from the
sensor.

NOTE

USB Communications Hub will search only for
already registered sensor or new sensor reset within last
30 minutes. To register a new sensor, reset sensor prior
to search.

7. Press and hold and on the main unit to initiate

sensor search.

For best results:

• Place the sensor within 100 m (300 ft) of the USB

Communications Hub and main unit.

• P os ition t he sensor s o that it fac es the USB

6

EN

Communications Hub and main unit, minimizing
obstructions such as doors, walls and furniture.

• Place the sensor out of direct sunlight and moisture.

• Place the sensor in a location with a clear view to the
sky, away from metallic / electronic objects.

• Position the sensor close to the USB Communications
Hub and main unit during cold winter months as below­freezing temperatures may affect battery performance
and signal transmission.

TIP

The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.

NOTE

Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.

SET UP MAIN UNIT

1. Remove the battery compartment cover.

2. Insert the batteries, matching the polarities.

3. Press RESET after each battery change.

NOTE

Batteries should not be exposed to excessive heat
such as sunshine or fire.

SET UP SOFTWARE (FIRST TIME USE)

WINDOWS XP

To install software:

1. Run CD software provided.

2. Setup wizard dialogue box will appear and guide you
through the installation process.

3. After successful installation, double click on
desktop shortcut.

4. Click DISPLAY in Oregon Weather Station dialogue
box.

Select Cities:

5. Click

next to 5 day weather forecast.

6. On the new page that appears, there will be cities set
as default. To change, click

CHANGE.

7. In the Settings… dialogue box, City tab, select cities
in the drop down menus (Region; Country / Area; City
/ US Zip).

8. Click OK.

7

EN

WINDOWS VISTA

To Disable User Access Control (UAC):

1. From the desktop, My Computer > Control Panel >
User Accounts and Family Safety > Change your
Windows password > Turn User Account Control
On or Off.

2. Deselect the UAC option by un-ticking.

3. Follow steps 1-8 from above section.

DISABLE SLEEP MODE

To allow for continuous update of data, ensure Sleep Mode
on computer is disabled.

TO DISABLE SLEEP MODE ON COMPUTER
(WINDOWS XP )

1. Right click on Desktop.

2. Choose “Properties”.

3. Click on “Screen Saver” Tab in the Display Properties
window.

4. Click on “Power ” located at the b ottom half of
window.

5. A new window “Power Options Properties” will open.

6. Under “System standby” option, choose “Never” in
drop down menu.

7. Click “Apply” and then click “OK”.

8. Previous window will return. Click “OK” to confirm and
exit.

TO DISABLE SLEEP MODE ON COMPUTER

(WINDOWS VISTA)

1. Right click on Desktop.

2. Choose “Personalize”.

3. Click on “Screen Saver” Tab in the Display Properties
window.

4. Click on “Change Power Settings” located at the bottom
half of window.

5. Select “High Performance” and click “Change plan
settings”.

6. Click “Change advanced power settings”.

7. Click “Sleep” and click “Hibernate after”.

8. Click “Setting” and set “0” minutes.

9. Click “Apply” and then “OK”.

SET UP USB COMMUNICATIONS HUB

NOTE

Set up the remote sensor before installing the USB

Communications Hub.

Approximately 30 minutes daily connection to computer
is sufficient to receive current weather data.

For c ont i nuo us us e, al w ays conn ect t he US B
Communications Hub to the computer using the USB

8

EN

cable provided.

There is a registration mode with the main unit when the
USB Communications Hub is turned on the first time, or
after each installation.

IMPORTANT

Registration can take half an hour. Do
not turn off computer / disconnect USB from computer
during this time.

Continuous display of

indicates data transfer is

successful.

MAIN UNIT SCREEN DISPLAY

TO CHANGE DISPLAY MODES

To toggle between 5 cities:

Press / .

To view alarm time and status:

Press ALARM.

To toggle be tween tem perat ur e and humidity
display:

Press MODE.

TO VIEW DIFFERENT WARNING MESSAGES

Press SNOOZE · MESSAGE.

WEATHER FORECAST

For your convenience there is an enclosed sheet listing
individual weather icons and their respective meanings.

The number of days with weather forecast available is
dependent on data provided by local observatories.

CLOCK

TO MANUALLY SET CLOCK

NOTE

This product is designed to synchronise its calendar
clock automatically with the information downloaded from
the PC.

1. Press and hold MODE to enter settings.

2. Press / to change settings.

3. Press MODE to confirm settings.

The settings order is: 12/24 hr format, hour, minute, year,

9

EN

month-day / day-month, month, day and language.

NOTE

The language options are English (ENG), German
(GER), French (FRE), Italian (ITA), Spanish (SPA) and
Russian (RUS).

ALARM

TO SET ALARM

1. Press ALARM to enter Alarm mode.

2. Press and hold

ALARM to enter settings.

3. Press / to set hour / minute.

4. Press ALARM to confirm settings.

5. Press MODE to confirm and return to clock display.

TO ACTIVATE / DEACTIVATE ALARM

1. Press ALARM to enter Alarm mode.

2. Press ALARM repeatedly until desired option is

displayed ( / “OFF”).

3. Press MODE to confirm and return to clock display.

TO SILENCE ALARM

• Pre ss SNOO ZE · MESSAGE to silence it fo r 8

minutes

OR

• Press any key to turn the alarm off and activate it again

after 24 hours.

BACKLIGHT

Press SNOOZE · MESSAGE to activate LED backlight
for 8 seconds.

RESET

Press RESET to return to the default settings.

SPECIFICATIONS

MAIN UNIT

Dimensions 135 x 27 x 135 mm
(L x W x H) (5.3 x 1.1 x 5.3 in)

Weight 260 g (9.17 oz) without battery

Power 3 x UM-3 (AA) 1.5V batteries

INDOOR TEMPERATURE

Temperature unit °C / °F

Displayed range 0°C to 50°C (32°F to 122°F)

Operating range -5°C to 50°C (23°F to 122°F)

Resolution 0.1°C (0.2°F)

INDOOR RELATIVE HUMIDITY

Displayed range 2% to 98%

Operating range 25% to 90%

Resolution 1%

10

EN

USB COMMUNICATIONS HUB

Dimensions 68 x 46 x 136 mm
(L x W x H) (2.7 x 1.8 x 5.4 in)

Weight 92 g (3.2 oz) without battery

Signal frequency 433 MHz

Transmission range 100 meters (300 feet)
unobstructed

Information update Approximately every
10 minutes

Registration period Approximately 20 minutes

Power Via PC through USB cable

OUTDOOR REMOTE THERMO SENSOR

Dimensions 62 x 20 x 90 mm
(L x W x H) (2.4 x 0.8 x 3.5 in)

Weight 50 g (1.76 oz) without battery

Temperature range -20°C to 60°C (-4°F to 140°F)

Temperature resolution 0.1°C (0.2°F)

Signal frequency 433 MHz

Transmission range 100 m (300 ft) unobstructed

Transmission period Approximately every
60 seconds

Number of channels 3

Power 2 x UM-4 (AAA) 1.5V
batteries

CLOCK / CALENDAR

Clock display HH:MM

Hour format 12hr AM/PM or 24hr

Calendar DD/MM or MM/DD

PRECAUTIONS

• Do not subject the unit to excessive force, shock, dust,
temperature or humidity.

• Do not cover the ventilation holes with any items such
as newspapers, curtains etc.

• Do not immerse the unit in water. If you spill liquid over
it, dry it immediately with a soft, lint-free cloth.

• Do not clean the unit with abrasive or corrosive
materials.

• Do not tamper with the unit’s internal components. This
invalidates the warranty.

• Only use fresh batteries. Do not mix new and old
batteries.

• Images shown in this manual may differ from the actual
display.

• When disposing of this product, ensure it is collected
separately for special treatment and not as normal
household waste.

• Placement of this product on certain types of wood
may result in damage to its finish for which Oregon
Scientific will not be responsible. Consult the furniture

11

EN

manufacturer’s care instructions for information.

• The contents of this manual may not be reproduced
without the permission of the manufacturer.

• Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.

• Please note that some units are equipped with a
battery safety strip. Remove the strip from the battery
compartment before first use.

NOTE

The technical specifications for this product and
the contents of the user manual are subject to change
without notice.

NOTE

Features and accessories will not be available in
all countries. For more information, please contact your
local retailer.

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn
more about Oregon Scientific products. If you’re in
the US and would like to contact our Customer Care
department directly, please visit: www2.oregonscientific.
com/service/support

OR

Call 1-800-853-8883.

For inte rna tio nal inqu iri es, pl ea se vis it: ww w2.
oregonscientific.com/about/international

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientific, declares that this Global 5-Day
Weather Adviser

I (model: I300) is in compliance with
the essential requirements and other relevant provisions
of Directive 1999/5/EC. A copy of the signed and dated
Declaration of Conformity is available on request via our
Oregon Scientific Customer Service.

COUNTRIES RTTE APPROVAL COMPLIED

All EU countries, Switzerland CH

and Norway N

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.

WARNING

Changes or modifications not expressly

approved by the party responsible for compliance could

12

EN

void the user’s authority to operate the equipment.

NOTE

This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation.

This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV

technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact
for support or sales. Please call our customer service

number (listed on our website at www.oregonscientific.
com, or on the warranty card for this product) for all
inquiries instead.

We

Name: Oregon Scientific, Inc.

Address: 19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA

Telephone No.: 1-800-853-8883

declare that the product

Product No.: I300

Product Name: Global 5-Day Weather Adviser I

Manufacturer: IDT Technology Limited
Address:Block C, 9/F, Kaiser Estate,
Phase 1,41 Man Yue St.,
Hung Hom, Kowloon,
Hong Kong

is in conformity with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: 1) This device
may not cause harmful interference. 2) This device must
accept any interference received, including interference
that may cause undesired operation.