TABLE OF CONTENTS |
|
About this guide ................................................. |
2 |
Product overview ................................................ |
3 |
Getting started ................................................... |
7 |
Batteries ......................................................... |
7 |
AC power adapter .......................................... |
7 |
Change settings ............................................. |
7 |
Clock ................................................................... |
8 |
Alarm ................................................................. |
10 |
Temperature ..................................................... |
11 |
Backlight ........................................................... |
11 |
Projector ........................................................... |
11 |
EN
Reset system .................................................... |
12 |
Safety and care ................................................ |
13 |
Warnings ........................................................... |
13 |
Additional resources ........................................ |
14 |
Troubleshooting ................................................ |
15 |
Specifications ................................................... |
16 |
1
EN
ABOUT THIS GUIDE
Congratulations on your selection of the Oregon Scientific Silverstone Radio-Controlled Projection Clock with Indoor Temperature (FAP-101). This powerful device bundles time keeping, alarm, projection, and indoor temperature measurement features.
Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know.
In this box, you will find:
•Main unit
•Batteries
•AC/DC power adapter
2
PRODUCT OVERVIEW
TOP VIEW
EN
DESCRIPTIONS
1.Snooze / Light button (à 10, 11, 12)
2.Projection lens (à 12)
3
EN
LCD DISPLAY |
DESCRIPTIONS |
1. Clock (à 8)
2. RF Reception Signal (à 8)
3. Date / Alarm (à 9, 10)
4. Alarm Type (à 10)
5. Temperature (à 11)
6. Low battery icon (à 7)
4
EN
FRONT VIEW |
BUTTON DESCRIPTIONS |
|
|
1. |
Clock – set time / date or view seconds / day of |
|
|
week (à 7, 9, 10) |
|
2. |
Up / Down – increase / decrease setting |
|
|
or activate / deactivate auto-synchronization |
|
|
(à 7, 9) |
|
3. |
Alarm – set / activate / deactivate alarm |
|
|
(à 10) |
|
4. |
Projector (à 11) |
5
EN
BACK VIEW |
DESCRIPTIONS |
|
|
1. |
Projector focus knob (à 12) |
|
2. |
180° rotation (flip image) button ( à 12) |
|
3. |
Image rotation button (à 12) |
|
4. |
Radio signal format switch (à 8) |
|
5. |
Reset button (à 12) |
|
6. |
Projector switch (à 12) |
|
7. |
°C/ °F switch ( à 11) |
|
|
AC power adapter and battery |
|
compartment not shown. |
6