Opticum 7002T User Manual

User Manual

Of Digital Set Top Box

Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference.

Size:120X170mm

OPTICUM 7002T

Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Position the cables so that they cannot be walked on or pinched by items placed on or against them.

Do not use the set top box in humid or damp conditions. Do not allow the set top box to get wet.

Do not place water filled objects such as vases on top of the set top box.

Do not expose the set top box to dripping or splashing. Do not place naked flame sources, such as candles, on the top of the set

top box.

Cleaning

ALWAYS unplug the set top box before you clean it. Do not use liquid or aerosol cleaners. Clean the set top box with a soft, damp (not wet) cloth.

Ventilation

The slots and openings on the set top box are for ventilation. Do not cover or block them as it may cause overheating.

NEVER let children push anything into the holes or slots on the case.

Servicing

There are no user serviceable parts in this set top box.

When servicing, refer to qualified service personnel. Consult your dealer if you are ever in doubt about the installation, operation or safety of this unit.

Battery Disposal

Please ensure batteries are disposed of safely.

Check with your local authority for disposal regulations.

Safety is Important

To ensure your safety and the safety of others, please ensure you read the Safety Instructions before you operate this product.

Keep this information in a safe place for future reference. Please read all the safety information before using the product. Safety Considerations.

Never dispose of batteries in a fire or with other household waste.

1. The apparatus shall not be exposed to dripping or Splashing and that no objects filled with liquids, such as Vases, shall be placed the apparatus.

2. The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

3. To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains.

4. The mains plug of apparatus should not be obstructed or should be easily accessed during intended use.

Table of Contents

Introduction .......................................................................... 1

Front and Rear Panel............................................................. 2

Remote Controller ................................................................. 3

Connections...........................................................................5

First Time Installation............................................................. 7

Basic Operations ...................................................................9

Using the On-Screen Setup Menu...........................................13

Troubleshooting ...................................................................25

Specifications...................................................................... 26

Introduction

This is a Free-To-Air digital terrestrial receiver, allowing you to access free-to-air digital terrestrial TV channels and radio broadcasts on your TV set. Its digital reception covers VHF & UHF band. Compared with the analog TV programs, digital TV programs eliminate the noise and interference but offer high quality video and audio. An on-screen initial installation guide is provided so that you can easily start to enjoy watching the programs. In addition, a fully featured remote controller is included that offers you access to every feature with a simple press of a button.

Main Features Full comply with European standard

Full MPEG2 ISO/IEC 13818 transport stream compliant audio/ video decoding Bandwidth of 6/7/8MHz supported COFDM demodulator Automatic/manual channel search Channel edit, moving and deletion Parental lock control NTSC/PAL converting automatically and manually EPG (Electronic Program Guide) and Teletext function Multiple-language OSD Supports multi-subtitle RS-232 serial port for software upgrade Dual SCART(TV SCART output/VCR SCART input) Tuner RF in/loop through SDTV only Full function remote control

Package Contents Before installation, please check the items of the package.

The package should contain the following items: ~ Digital Set Top Box x1 ~ Remote Controller x1 ~ AAA Battery for the remote controller x2 ~ User's Manual x1

Digital Set Top Box

1 POWER BUTTON: Used to turn on or off of the main power of the unit. 2 REMOTE CONTROL SENSOR: Used to receive the signal from the remote control. 3 Standby Indicator: Used to visually show power state of the set top box, the green

LED will show if turned on the set top box and the red LED will be light if the set top box entered standby mode.

4 CHANNEL UP/DOWN: Used to change channels without using the remote control.

5 STANDBY BUTTON: Used to switch the set top box on and off.

Front Panel and Rear Panel

1. Front panel

1 RF IN : This socket connects to your external aerial. 2 RF LOOP THROUGH: This socket will bypass the RF signal to either your TV or another

video system.

3 COAXIAL: This socket connects to a coaxial socket on your surround sound system. 4 VCR SCART: This socket connects to either a DVD or other video system. 5 TV SCART: This socket connects to your TV. 6 RS-232 PORT: This socket is only used for software upgrade. 7 MAINS CABLE: This is used to connect to your main power supply.

OFF

7002T

Digital Terrestrial Receiver

LOOPLOOPRR FF

THROUGHTHROUGH

CoaxialCoaxial

Digital Audio

VCR O OVCR O O

TVTV

SERVICE

Serial No.:

100-240V~

50/60Hz

DIGITAL TERRESTRIAL RECEIVER POWER SUPPLY: 100-240V~ 50/60Hz MAX POWER CONSUMPTION: 10WATTS

MODEL: OPTICUM 7002T

ININRRFF

RISK OF ELECTRIC SHOCK

DO NOT OPEN COVER

CAUTION

DTV/VCR

EXIT

PAUSE

1 2 3

4 5 6

7 8 9 0

INFO

AUDIO

EPG

VOL +

VOL

CH+

CH-

MUTE

RECALL

TV/RADIO

STANDBY

GAME

SUBTITLE TEXT

FAVORITE

OPTICUM 7002T

Remote Key Function:

1. DTV/VCR Used to switch between the VCR SCART input

and the DTV output mode.

2. INFO Used to display information about the channel being viewed or further information about the program when in small EPG screen.

3. PAUSE Used to pause or playback the program being viewed .

4. EPG Used to display information about the program being viewed and what's on next.

5. EXIT Used to return to the previous screen or menu.

6. OK Used to confirm a selection within a menu.

7. VOL+ Used to move around the menu screens or changing

the volume in non-menu state.

8. FAVORITE Used to access your favourite channels.

9. GAME: Used to select 4 built-in mini games: Mine, Tetris,

Gomoku, Calendar.

10. RECALL Used to switch between the last two viewed channels.

11. SUBTITLE: Used to switch between different subtitles that are broadcasted

12. TEXT: Used to open teletext OSD display if teletext available in the broadcasted stream.

13. STANDBY Used to switch the set top box to on and off.

14. MUTE Used to turn the sound on or off.

15. MENU Used to open the main menu window.

16. CH+ Used to move around the menu screens or selecting

the channels in non-menu state.

17. VOL- Used to move around the menu screens or changing the volume in non-menu state.

18. CH- Used to move around the menu screens or selecting the channels in non-menu state.

19. NUMBER KEYS Used to select channel numbers or input numbers in menus.

20. AUDIO Used to set the sound output, the available settings are STEREO, LEFT, RIGHT, MONO.

21. TV/RADIO Used to switch between TV channels and Radio stations.

22. COLOR KEYS(RED/GREEN/YELLOW/BLUE): Used to operate different functions in TEXT screen or other menus.

Note: SUBTITLE/TEXT/LANGUAGE may not be available for all channels

Installing the Batteries

Remove the battery cover from the remote control and put 2xAAA size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries.

1.Open the cover

2.Install batteries

3.Close the cover

Using the Remote Control

To use the remote control, point it towards the front of the digital set top box The remote control has a range of up to 7 metres from the set top box at an angle of up to 60 degrees.

The remote control will not operate if its path is blocked.

Sunlight or very bright light will decrease the sensitivity of the remote control.

OFF

7002T

Digital Terrestrial Receiver

DTV/VCR

EXIT

PAUSE

1 2 3

4 5 6

7 8 9 0

INFO

AUDIO

EPG

VOL +

VOL

CH+

CH-

MUTE

RECALL

TV/RADIO

STANDBY

GAME

SUBTITLE TEXT

FAVORITE

OPTICUM 7002T

Caution: Make sure to check the voltage specification of the wall outlet is the same rating with the receiver. To prevent the risk of electric shock, do not open the cover or the back of the receiver.

Connections

Connecting to a TV Set

LOOPLOOPRR FF

THROUGHTHROUGH

CoaxialCoaxial

Digital Audio

VCR O OVCR O O

TVTV

SERVICE

100-240V~

50/60Hz

ININRR F F

LOOPLOOPRRFF

THROUGHTHROUGH

CoaxialCoaxial

Digital Audio

VCR O OVCR O O

TVTV

SERVICE

100-240V~

50/60Hz

ININRR F F

VCR

Connecting to TV and VCR

Note: When connecting the receiver to other equipment, e.g., TV,

VCR and amplifier, make sure to refer to relevant user manual for instruction. Also, make sure you disconnect all the equipments from the mains supply before the connection.

+ 21 hidden pages

Opticum 7002T User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual