Opticon OPH 1005 User Manual

OPH-1005
		Quick Start Guide

Introduction

•Read this quick start guide carefully before installing and/or using this product.

•Keep this quick start guide for future reference and store in a safe place.

Notice

•This quick start guide may be revised or withdrawn at any time without prior notice.

•This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.

•Trademarks used are property of their respective owners.

•Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect damages howsoever caused.

Caution and Warning (Please refer to the specification manual and instruction guide for details.)

1. Laser Safety

• Do not stare into the laser beam.

2. Handling Instructions

OPH-1005

•Do not attempt to disassemble, modify or update this device.

•Operating the scanner while operating machinery or a vehicle can be distracting.

•Do not drop this product or put heavy items on this product.

•Do not insert foreign substances into the device.

•Do not use this product in the following areas:

-In areas exposed to direct sunlight for long periods of time.

-In dusty environments.

-Near water or other liquids, or in extremely high humidity.

-Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat.

-Near microwaves or medical devics.

•When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild detergent.

Battery Pack

•Do not attempt to disassemble this battery.

•Do not expose the battery pack to liquids or allow the battery contacts to get wet.

•Do not expose the battery pack to heat sources including other devices that produce heat.

•Do not short the power leads on the battery pack. If the (+) and (-) terminals come in contact with metals (such as a necklace or hairpin), a short-circuit will occur.

•Do not load the battery pack with its (+) and (-) terminals reversed.

•Check the local regulations for proper battery disposal.

Before Getting Started

■ What's in the Box

Confirm that you have the following items before getting started:

No.	Item	Function
1	Portable Terminal	A laser portable terminal with a barcode scanning feature.
2	Strap
3	Quick Start Guid	Provides product information and instruction guide.

*The number of accessories may differ depending on the product specification. Please contact the nearest dealer if accessories are damaged or missing.

Copyright©2012, Opticon All rights reserved.

Overview

■ OPH-1005 Basic Specifications

	Parameter		Specifications
	Physical	Size	(H) 136.1 x (W) 55.4 x (D) 22.8 mm
	Features
		Weight	Approx. 140g (including Li-ion battery)
	Control	CPU	32bit MCU
	Section
		OS	Proprietary
	Memory	FROM	4MB
		RAM	4MB
	Display	Material	LCD (262144 color)
	Section
		Number of dots	320 dots x 240 dots
		Dot size	0.24mm x 0.24mm
		Dot pitch	0.18mm
		Backlight	White LEDs
		Contrast Control	Enabled
	Other Display	LED	Bi-color LED (Red and Green)
	Section
		Buzzer	Tone and loudness can be configured
	OperationSection	Keys	23 keys
	Scanning	Light Source	Red laser diode
	Section
		Wavelength	650 ±10nm
		Light Output	1mW or less
		Scan Rate	100 ±20scan /sec
			JAN, EAN, UPC-A, UPC-E, NW-
			7(Codabar), Industrial 2 of 5,
			Interleaved 2 of 5, Code 11,
		Supported	Code 39, Code 93, Code 128,
			MSI/Plessey, UK/Plessey, IATA,
		Symbologies
			Telepen, Matrix 2 of 5, S-Code,
			Tri-Optic, Chinese Post, EAN 128,
			R S S -14 , R S S L i m i t e d , R S S
			Expanded, PDF417, MicroPDF417
	Power	Main Battery	Lithium-ion battery (3.7V 1100mAh)
	Supply
		Backup Battery	Manganese dioxide lithium-ion battery (11mAh)
	Section
		Operating Time	Approx. 50 hours (2 scans/10 sec)
		DataRetentionTime	More than 24 hours
	Comm.	IrDA	IrDA Ver. 1.2
	Section		Baud rate: (SiR): 9600 to 115.2kbps
	Clock	Real Time	Supports year, month, day, hour,
	Section	Clock (RTC)	minute, second (leap year supported)
	Durability	Operating Temp.	-10 deg. C to 50 deg. C
		Operating Humidity	20% to 85% (non-condensing)
		Storage Temp.	-20 deg. C to 60 deg. C
		Storage Humidity	20% to 85% (non-condensing)
		Charging Temp.	0 deg. C to 40 deg. C
		AmbientLight	Fluorescent: up to 4,000lx
		Immunity	Sunlight: up to 80,000lx
		Dustand Drip-proof	IP54
		Shock	Dropped 3 times from each of 6 angles
			onto concrete from a height of 150cm
		Endurance
			with no defects found. (Total 18 times)

■Detailed View

No.	Part	Function
	LCD	Indicates the status of program
		execution, scanned data and so
		on.
	Status LED	Alerts users the status of scanning
	(Red and Green)	operation and data communication.
		The scan engine emits a laser beam

Optical Window through the optical window while

scanning a barcode.

SCAN Key

Starts a barcode scanning operation.

POWER Key Turns ON or OFF the power.

IrDA	This portable terminal communicates

Communication with the designated cradle through

	Window	the IrDA communication window.
	Buzzer Hole	Buzzer sounds through the buzzer
		hole.

Battery Cover Protects the battery pack.

	Charging	Electrical terminals for power distri-
	Terminals	bution and power management.

Strap Hook

To avoid communication problems between the portable Memo terminal and a cradle, keep the IrDA communication

window clean.

The IrDA communication performance may decline due to excessive ambient light especially under strong sunlight or inverted fluorescent light.