Opticon OPH 1004 Specifications Manual

Portable Terminal

OPH 1004

The OPH 1004 is a portable terminal with a built-in
laser scan engine.

Specifications Manual

All information subject to change without notice.

Document History

Opticon

OPH 1004

Specifications Manual

Model Number:
Edition:
Date:

OPH 1004

1A

2009

Specification Number:
Original Spec Number:

SS06146

Copyright 2009 Opticon. All rights reserved.

This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or
machine readable form without prior written consent of Opticon.

Limited Warranty and Disclaimers
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE

PRODUCT.
Serial Number

A serial number appears on all Opticon products. This official registration number is directly related to the device
purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty.

Warranty

Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and
workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in
materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by
modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under
warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon
has been informed about the possibility of such damages.

Packaging

The packing materials are recyclable. We recommend that you save all packing material to use should you need to
transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by
the warranty.

Trademarks

Trademarks used are the property of their respective owners.

Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-17,
Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL [phone]; FAX [phone]

SUPPORT

USA Europe

Phone: [phone]

Email: [e-mail] Email: [e-mail]

Web: www.opticonusa.com Web: www.opticon.com

2

Opticon

OPH 1004

Specifications Manual

Contents

1. Abstract....................................................................................................................................... 5

2. Overview...................................................................................................................................... 5

3. Physical Features....................................................................................................................... 6

3.1. Dimensions ......................................................................................................................... 6

3.2. Weight ................................................................................................................................. 6

4. Environmental Specifications ...................................................................................................7

4.1. Operating Temperature and Humidity................................................................................. 7

4.2. Charging Temperature ........................................................................................................ 7

4.3. Storage Temperature and Humidity .................................................................................... 7

4.4. Ambient Light Immunity....................................................................................................... 7

5. Controls....................................................................................................................................... 8

6. Electrical Specifications ............................................................................................................ 9

6.1. Electrical Characteristics..................................................................................................... 9

6.2. Main Battery ........................................................................................................................ 9

7. Optical Specifications.............................................................................................................. 10

7.1. Laser Scan Specifications................................................................................................. 10

7.1.1. Tilt of Laser Scan Line .............................................................................................................10

7.1.2. Curvature of Scan ....................................................................................................................10

8. Technical Specifications.......................................................................................................... 11

8.1. Print Contrast Signal (PCS) .............................................................................................. 11

8.2. Minimum Resolution.......................................................................................................... 11

8.3. Scan Area and Resolution ................................................................................................ 12

8.3.1. Depth of Field...........................................................................................................................12

8.4. Pitch, Skew, and Tilt.......................................................................................................... 13

8.4.1. Pitch Angle ...............................................................................................................................13

8.4.2. Skew Angle and Dead Zone ....................................................................................................14

8.4.3. Tilt Angle ..................................................................................................................................15

8.5. Curvature .......................................................................................................................... 16

9. Interface Specifications ...........................................................................................................17

9.1. Infrared Transmission (IrDA)............................................................................................. 17

9.1.1. Specifications ...........................................................................................................................17

9.1.2. Transmission speed.................................................................................................................17

3

Opticon

OPH 1004

Specifications Manual

10. Serial Number........................................................................................................................... 17

11. Packaging Specifications........................................................................................................18

11.1. Individual Packaging Specification .................................................................................... 18

11.2. Collective Packaging Specification ................................................................................... 19

12. Durability................................................................................................................................... 20

12.1. Static Electricity ................................................................................................................. 20

12.2. Shock ................................................................................................................................ 20

12.3. Vibration Strength ............................................................................................................. 20

12.4. Dust and Drip Proof........................................................................................................... 20

12.5. Cable Bending...................................................................................................................20

13. Regulatory Compliance ...........................................................................................................21

13.1. Laser Safety ...................................................................................................................... 21

13.2. Product Safety................................................................................................................... 21

13.3. EMC .................................................................................................................................. 21

13.4. RoHS................................................................................................................................. 21

14. Safety......................................................................................................................................... 22

14.1. Shock ................................................................................................................................ 22

14.2. Temperature Conditions.................................................................................................... 22

14.3. Foreign Materials .............................................................................................................. 22

14.4. Other ................................................................................................................................. 22

15. Mechanical Drawing.................................................................................................................23

Table of Figures

Figure 1: Scan tilt and curvature................................................................................................. 10

Figure 2: Depth of field ............................................................................................................... 12

Figure 3: Pitch angle................................................................................................................... 13

Figure 4: Skew angle and dead zone ......................................................................................... 14

Figure 5: Tilt angle...................................................................................................................... 15

Figure 6: Curvature..................................................................................................................... 16

Figure 7: Serial number label ..................................................................................................... 17

Figure 8: Individual packaging.................................................................................................... 18

Figure 9: Collective packaging.................................................................................................... 19

Figure 10: Mechanical drawing...................................................................................................23

4

Specifications Manual

1. Abstract

This manual provides specifications for the OPH 1004 portable terminal (hereafter referred to
as “scanner”).

2. Overview

The OPH 1004 is a portable terminal with a built-in laser scan engine. Barcodes and data input
are stored in the terminal’s internal memory using various keys. Stored data can be sent to a
host via infrared transmission (IrDA version 1.2) using the CRD 1001 dedicated cradle or the
CRD 1002 analog modem cradle or the CRD 1003 GSM modem cradle.

Features

• IrDA-equipped, batch-type portable terminal

• Satisfies IP54 requirements; drop-resistant to 1.5 m

• Small, compact chassis

Supported symbologies:

Opticon

OPH 1004

Linear (1D) Postal 2D

JAN/UPC/EAN, incl. add-on Chinese Post Composite Codes

Codabar/NW-7 Korean Postal Authority Code MicroPDF417

Code 11 PDF417

Code 39

Code 93

Code 128

GS1-128 (EAN-128)

GS1 Databar (RSS)

IATA

Industrial 2of5

Interleaved 2of5

ISBN-ISMN-ISSN

Matrix 2of5

MSI/Plessey

S-Code

Telepen

Tri-Optic

UK/Plessey

5

An application development kit for the development of a customer’s original application is
available as an option.

Development language: C language.

[Contents]

• Application Development Specification Manuals

• Development Library

3. Physical Features

3.1. Dimensions

W 55.0 x D 23.0 x H 136.0 mm

3.2. Weight

140 g (including battery)

Opticon

OPH 1004

Specifications Manual

6

4. Environmental Specifications

4.1. Operating Temperature and Humidity

Temperature: -10 to 50° C

Humidity: 20% to 85% RH

4.2. Charging Temperature

Temperature: 0 to 40° C

4.3. Storage Temperature and Humidity

Temperature: -20 to 60° C

Humidity: 20% to 85% RH

4.4. Ambient Light Immunity

Decoding performance is guaranteed when the range of illumination on a barcode
surface is between zero and the following values:

Opticon

OPH 1004

Specifications Manual

Incandescent light 4,000 lx

Fluorescent light 4,000 lx

Sunlight 80,000 lx

Conditions

Barcode Sample: OPTOELECTRONICS Test Sample

PCS = 0.9, Resolution = 0.25 mm, Quiet Zone = 15 mm,

Symbology = 9-digit Code 39, N/W Ratio = 1:2.5

Distance 96 mm from the edge of the scanner

Angle α = 0° β = 15° γ = 0°

Curvature R = ∞

Direct light or specular reflection from a light source should be prevented from entering
the acceptance area.

Note: α, β and γ respectively represent pitch, skew and tilt. Please see section 8 for how

these values are defined.

7