Opti Pull Up Bar User guide

Page 1
OPTI CHINNING BAR
620/0299
Main Tube: 1 pc
1
Insert 6 x M4 x 25mm Self Tapping Screws(3) to the Metal Retaining Cups (2) and screw into any position you want on both sides on to the door frame.
Ensure sufficient Head Room to perform the exercise correctly.
Make sure both Metal Retaining Cups (2) are levelled and aligned with each other on the door frame.
Fixed Screw: 1 pc
4
(1)
Metal Retaining Cups: 2 pcs
2
5
Ensure the Rubber Cushion Ring (5) are fully inserted into each side of the Metal Retaining Cups (2)
M4 x 25mm Self Tapping Screw: 6 pcs
3
Fit one end of the Main Tube (1) into one Metal Retaining Cup then rotate the Main Tube to lengthen it, lining up the opposite Main Tube End and Metal Retaining Cup until it is securely fitted into the door frame aperture.
Rubber Cushion Ring: 2 pcs
5
Required tool: Screw-driver (not included)
Regularly check the security of this fitment.
Argos Ltd.,
489 - 499 Avebury Boulevard
Central, Milton Keynes,
Customer contact number: 0345 640 2020
MK9 2NW
www.argos-support.co.uk
Loading...