OPTi Aura Product Manual

Page 1
Product Manual
Page 2
Switching On/Switching Off
Dimming the Image
Using the Timer
Using the App
Product Overview
Getting Started
Mounting the Projector
Inserting the Effect Wheel
Focussing the Image
Cleaning the Focussing Lens
Operating the Projector
Safety Instructions
Additional Accessories
Guarantee
7 8 8 9
1
2
2 3 6 6
7
12
13
13
.................................................................
......................................................................
..........................................................
....................................................
.............................................................
................................................
.......................................................
..................................................
...............................................................
.....................................................................
........................................................................
...............................................................
.......................................................
...............................................................................
Aura
Page 3
1
Product Overview
The [Opti] Aura LED is an ideal home sensory projector with Wi-Fi Connectivity, a dimmer function and off timer capabilities.
1x [Opti] Aura LED Projector
1x Power Supply
1x Effect Wheel*
1x Table Stand
1x Wall Mount (with xtures and ttings)
Power Rating : 6W
Operating Voltage : 9V AC
Product Size: 20 x 20 x 20 cm
Product Weight: 889g
Packed Product Size: 30 x 30 x 26 cm
Packed Product Weight: 2kg
*Effect Wheel Varies.
Aura
Packed Box Contents:
Page 4
Getting Started
Mounting the Projector
The projector can be mounted using the provided table stand (foam ring) or wall mount.
The wall mount should be screwed to a wall in a vertical position so that it supports the bottom and top of the projector. Fixtures and ttings are provided.
Note:
When wall mounting, the safety cord should be tted to the projector. To do this, attach the spring clip on the safety cord onto the side of the projector as per the image left.
2
Aura
Page 5
3
Position the magnetic wheel onto the magnetic adaptor on the projector.
For Magnetic Effect Wheels
Note:
To remove the wheel simply lift it off.
The [Opti] Aura has been designed to accommodate 4” and 6” effect wheels. For 6” effect wheels the slide on the left of the magnetic adaptor should be at the top as per the image left.
Inserting the Effect Wheel
For this projector Optikinetics recommend selected wheels, these can be found at:
www.optiaura.co.uk/wheels-packages.
Aura
Page 6
Bossed Push On Effect Wheels
For this projector Optikinetics recommend that customers use magnetic wheels. The Aura does also allow the use of bossed push on wheels. To use these wheels you will be required to remove the magnetic adapter from the projector. To do this, use the small allen key provided and place this in the hole on top of the magnetic adapter. Twist the allen key anticlockwise and the adapter will loosen and detatch from the projector.
You may have to turn on the projector to move the rotator. The hole on the top of the magnetic adaptor must face the top of the projector.
To reattach the magnetic adapter, make sure that the at of the shaft is facing the top of the projector. Place the magnetic adaptor onto the shaft and twist the allen key clockwise in the hole on the magnetic adaptor. The adaptor will subsequently tighten and attach to the projector.
Note:
4
Aura
Page 7
To attach glass bossed effect wheels such as liquid wheels, tighten the cross headed screw on the shaft of the wheel rotator as per the image left.
To detach a bossed push on wheel, unscrew the wheel if need be and make sure the wheel is vertical and straight. Then use both hands to pull the wheel off the shaft.
To attach plastic bossed push on effect wheels, simply push the wheels onto the shaft of the wheel rotator as per the image left.
Note:
A slight twist when attaching the plastic bossed push on effect wheel will help.
5
Aura
Note:
The screw needs to be aligned to the at of the shaft.
Page 8
The Aura projects a moving image of any size, however it is recommended that the maximum image projected is 4m in diameter. An image can be projected onto any medium. For best results, use the projector in a dark environment.
Cleaning the Focussing Lens
Use a soft tissue or lens cloth with a little methylated spirit or pure alcohol.
Focussing the Image
The Aura projector uses the same projection lens as Optikinetics' larger projectors [Opti] 100 LED, [Opti] Solar 250 LED and [Opti] Solar Sensory LED. This means that the quality of the image will be the same as those in any sensory room.
To focus the projected effect, twist the slide on the lens forward and backwards until your desired focus is achieved.
6
Aura
Page 9
Operating the Projector
Switching On/Switching Off
To turn the projector on simply connect the power supply cable to the inlet socket on the right hand side of the projector. The projector will turn on as you power up the projector.
If you leave the projector on standby, the next time you turn the projector on without the app, press the 'DIM - OFF - TIMER' button above the inlet socket.
To turn the projector off without the app, press and hold the 'DIM - OFF
- TIMER' button until the light turns off.
DIM - OFF - TIMER
9V AC 750Ma CE
7
Aura
Page 10
Dimming the Image
The projector has a bright dimmable light that is perfect in a bedroom.
To dim the image without the app, press and hold down the 'DIM - OFF
- TIMER' button until you reach your desired light output level.
Note:
It may take up to 15 minutes for liquid wheels to start to work as they contain oil that will ow freely once heated. This heat will come from the projector.
Using the Timer
Utilising the timer is ideal for those who want to automatically turn the projector off after a certain time unsupervised.
Turn on the projector and wait 10 seconds. To start the timer double click the 'DIM - OFF - TIMER' button. To indicate the timer starting, the projected light will icker. The timer automatically sets to 30 minutes, dims down then turns off. The timer settings can be varied and set to up to 60 minutes by using the projectors app.
8
Aura
Page 11
Using the App
The 'Opti Aura' App has been created free of charge to allow users to control the Aura projector remotely. The app is available on IOS and Android platforms and can be downloaded from the App Store or by Google Play. Alternatively you can visit our website
www.optiaura.co.uk/control-app.
Aura Conguration
The Aura should be congured to be part of your home network. This conguration process uses the Aura's own built-in Wi-Fi hotspot and only needs to be done once.
Ensure the Aura is switched on.
Using the networking app on your mobile device, connect to the projectors Wi-Fi hotspot. The SSID (the name of the network) for any Aura projector will start with ESP and be followed by numbers & letters. For example: ESP_9D14A2
Open the 'Opti Aura' App on the same device.
Click on 'Discover' page of the App. Wait until the projector's I.P address appears on one of the buttons (this may take a little time), then click on this I.P address button to select this projector.
1.
2.
3.
4.
9
Aura
The mobile device is now connected to the Aura.
Click on the 'Congure' page of the App.
Insert the SSID and Password of your home wireless router. This information is usually written on a label on the router.
Press the Update button. This then transfers the connection of the Aura to your home network.
Close the App.
Re-connect your mobile device to your normal home network.
5.
6.
7.
8.
9.
10.
If there is no home network, it is possible to directly control the Aura via its own Wi-Fi hotspot. Just follow the instructions above, skipping steps 6 to 10.
Page 12
Note:
It is possible to control 6 different Aura projectors with the same app.
Dimmer
The brightness of the projector can be adjusted using the slider. For full brightness move the slider to the right.
Timer
The timer settings can be varied and set to up to 60 minutes. To set the timer using the app, simply select the button with your desired time. To indicate that the button has been pressed, the selected button will turn green.
Using the App to control the Aura
Turn on/Turn Off
To turn the projector on, move the slider to the right towards full brightness. To turn the projector off, move the slider to the left.
To control the projector using the 'Opti Aura' App, click on the 'control' page of the app.
10
Aura
Page 13
F.A.Q
What do I do if the 'Opti Aura' App is not responding?
Turn off the projector at the mains.
Press and hold the ''DIM - OFF - TIMER' button above the inlet socket. Whilst keeping hold of this button, turn the projector back on at the mains.
Once the projector has been turned on at the mains, continue to hold the ''DIM - OFF - TIMER' button until the projector starts ashing.
1.
2.
3.
When the projectors starts ashing, release the ''DIM - OFF ­TIMER' button.
4.
If the app is freezing or is not working correctly, force the app to close. Check that the web enabled device is fully charged before restarting the app. If the app still does not work, reset the Aura projector to factory settings.
How do I reset the Aura projector to factory settings?
How do I change my home network so I can use the wi from the Aura projector?
Reset the projector back to factory settings and connect to the projectors wireless network.
11
Aura
If the app still does not work, reset the Aura projector to factory settings and disable and enable Wi-Fi on the mobile device.
Page 14
Do not attempt to service the projector unless you are qualied and working under the direction of the manufacturer.
When using your projection equipment basic safety precautions should be followed:
This equipment is for indoor use in moderate climates only.
All effect wheels should be stored in a dry, warm environment.
Always use the mains adaptor supplied suitable for your country.
Important Safety Instructions
Do not operate the appliance with a damaged cord, or if the appliance has been dropped, or damaged, until it has been examined by a qualied engineer.
Position the power supply so that it will not be tripped over, pulled or come into contact with hot surfaces.
If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat.
Always unplug appliance from electrical outlet before cleaning and servicing and when not in use.
To reduce the risk of electric shock – do not dismantle this appliance.
Never use the equipment in damp or wet conditions. Avoid excessive heat, humidity, dust and vibration.
Never pull cord to remove plug form outlet. Grasp plug and pull to disconnect.
12
Aura
Page 15
Additional Accessories
The [Opti] Aura has been manufactured by Optikinetics Ltd. Formed in 1970, Optikinetics is the leading innovators of effects lighting and has a plethora of products suitable for any occasion.
Each [Opti] Aura projector comes with one 6” effect wheel. There are over 200 effects wheels to choose from, additional wheels are available to purchase separately. To view our extensive range, please visit
www.optiaura.co.uk/wheels-packages.
Note:
On this projector some 6” wheels, in particular the liquid wheels may look different to when used on another [Opti] projector.
13
Guarantee
Optikinetics Ltd guarantees this product for 1 year from the date of purchase from all mechanical, electrical or assembly defect. Within this 1-year period any fault will be made good free of charge.
To extend the warranty free of charge to 3 years, please register your [Opti] Aura LED Projector by visiting
www.optiaura.co.uk/guarantee-form
Note:
The guarantee is void if the projector has been opened or if a repair has been attempted by anyone other than an Optikinetics authorised repairer.
Date
Tested
Signature
Aura
Page 16
38 Cromwell Road
Luton
Bedfordshire
LU3 1DN
England
+44 (0) 1582 411 413
UKAdmin@optikinetics.co.uk
www.optiaura.co.uk
Optikinetics Ltd
Loading...