Page 1
OPTI 6 X 4 QUICK ASSEMBLY FOOTBALL GOAL
Assembly & User Instructions - Please keep for future reference
Components - Parts
- CROSSBAR X 1D
A
- Nut & bolt set x 8
- Net x 1
B
- Ground Pegs x 4
G
- Net Clip x 18
N
- Carry Bag x 1
P
C E
Assemble Instructions
- GROUND BAR X 1
D
F
725/9256
- Support
Bar x 2
-Small parts
1. Layout the 6 sections of tubes which include crossbar, ground
bar, left hand, right hand upright posts and two support bars.
2. Connect together the tubes attached by the elastic cord, making
sure the button clip is securly located.
D
3. Fit the left (C) and right (E) upright post assembly to the crossbar
assembly (D). Also attach the ground bar (D) as shown below.
D
E
C
D
Important – Please read these instructions fully before assembly or using
These instructions contain important information which will help you get the best from your
equipment and ensure safe and correct assembly, use and maintenance.
If you need help or have damaged or missing parts, call the Customer Helpline:0345 6402020
Issue 1 9/26/16
Page 2
Assemble Instructions
4. Attach the remaining two support bars (F) onto the goal frame and secure with the nut and
6ft x 4ft EASY ASSEMBLE GOAL
bolt (A). When assembling support bars (F) make sure the washers are on either side of the
tube, under the head of the bolt and wing nut (A).
D
F
F
F
C
D
5. Drape the goal net (B) over the frame, make sure the red net tabs are top left and top
right of the goal. The seam of the net should follow the frame supports. Secure the net to the
frame using the net clip(N), ensure they are evenly spaced around the frame.
E
A
D
A
C
x 5
6. Use the 4 Ground pegs (P) to secure
the goal to the ground along the back
bottom tube that touches the ground.
489 - 499 Avebury Boulevard
x 2
Argos Ltd
Central Milton Keynes
MK9 2NW
x 2
x 2
Made in China
22
Loading...