Product Bulletin OP224ESA
September 1996
High Reliability GaAlAs Infrared Emitting Diode
Type OP224ESA-XN (3)
Features
∙Processed to Optek’s Military screening program patterned after ESA/SCC Generic Specification No. 5000
∙Miniature hermetically sealed“pill” package
∙Twice the power output of GaAs at the same drive current
∙Mechanically and spectrally matched to the OP600 series phototransistor
Description
The OP224ESA is a high reliability gallium aluminum arsenide infrared emitting diode mounted in miniature“pill” type hermetically sealed package. This package style is intended for direct mounting into PC boards.
All devices are processed to Optek’s 100 percent screening program patterned after ESA/SCC Generic Specification No. 5000. See page 13-4 for details.
Gallium aluminum arsenide features twice the radiated output of gallium arsenide at the same forward current. With a wavelength centered at 890 nanometers, it closely matches the spectral response of silicon phototransistors, such as Optek’s OP600 high reliability series.
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
- 65o C to +150o C |
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
- 55o C to +125o C |
Soldering Temperature (for 5 sec. with soldering iron) . . . . . . . . . . . |
. . . . . . 240o C(1) |
Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . . . 2.0 V |
Continuous Foward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . . . . 100 mA |
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
. . . . 100 mW(2) |
Notes:
(1)No-clean or low solids, RMA flux is recommended. Duration can be extended to 10 seconds max. when flow soldering.
(2)Derate linearly 1.00 mW/ o C above 25o C.
(3)X defines the Testing Level per ESA/SCC 5000 Generic Specification Chart III. X will be either “B”(full processing) or“C”(reduced processing).
N defines Lot Acceptance Tests per ESA/SCC Generic Specification 5000 Chart V. N will be either 1, 2, or 3. See Generic Processing Table for details.
|
Part Number Guide |
|
OP224ESA-XN |
Optek |
ESA/SCC Specification |
High Reliability |
No. 5000 |
Part Number |
|
|
“B”- Full Processing |
|
“C”- Reduced Processing |
|
Level ”1”Environmen - |
|
tal/Mechanical plus Level |
|
2 & 3 |
|
Level “2”Life Testing |
|
plus Level 3 |
|
Level “3" Electrical Inspec - |
|
tion |
Optek Technology, Inc. |
1215 W. Crosby Road |
Carrollton, Texas 75006 |
(9 72) 323-2200 |
Fax (972) 323-2396 |
13-26