Onkyo T-405X User Manual
Stereo Tuner
T-405X
Instruction Manual
English
Before using
Connections
STANDBY/ON
ACCUCLOCK
STANDBY/ON
ACCUCLOCK
FM STEREO / AM TUNER
FM STEREO TUNER
MEMORYTIMERBAND CLEAR
AUTO/MONO
MEMORYTIMER CLEAR
AUTO/MONO
PRESET
TUNING
PRESET
TUNING
Operation
CHARACTERDISPLAY
T-405X
CHARACTERDISPLAY
T-405X
Other Information
Before using
Thank you for purchasing ...
Thank you for purchasing the ONKYO T-405X Tuner.
Please read this manual thoroughly before making any connection or turning on the power.
Follow these instructions to obtain optimum performance and maximum listening enjoyment from
your new Tuner. Please retain this manual for future reference.
Main Features
• High-Quality Separate Component
• Preset Memory for Up to 30 Broadcast Stations
• Auto Preset Memory Function
• Weekly Program Timer
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Important Safeguards
1. Read Instructions – All the safety and
operating instructions should be read before
the appliance is operated.
2. Retain Instructions – The safety and
operating instructions should be retained for
future reference.
3. Heed Warnings – All warnings on the
appliance and in the operating instructions
should be adhered to.
4. Follow Instructions – All operating and use
instructions should be followed.
2
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
5. Water and Moistur e – The appliance should
not be used near water – for example, near a
bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement, or near a swimming pool,
and the like.
6. Carts and Stands – The appliance should be
used only with a cart or stand that is
recommended by the manufacturer.
6A. An appliance and cart
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the appliance and cart
combination to overturn.
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
PORTABLE CART WARNING
S3125A
Important Safeguards
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC – NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
S2898A
7. Wall or Ceiling Mounting – The appliance
should be mounted to a wall or ceiling only
as recommended by the manufacturer.
8. Ventilation – The appliance should be
situated so that its location or position does
not interfere with its proper ventilation. For
example, the appliance should not be situated
on a bed, sofa, rug, or similar surface that
may block the ventilation openings; or if
placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow
of air through the ventilation openings, there
should be free space of at least 5 cm (2 in.)
and an opening behind the appliance.
9. Heat – The appliance should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances (including
amplifiers) that produce heat.
10. Power Sources – The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance.
11. Polarization – If the appliance is provided
with a polarized plug having one blade wider
than the other, please read the following
information: The polarization of the plug is a
safety feature. The polarized plug will only fit
the outlet one way. If the plug does not fit
fully into the outlet, try reversing it. If there is
still trouble, the user should seek the services
of a qualified electrician. Under no
circumstances should the user attempt to
defeat the polarization of the plug.
12. Power-Cord Protection – Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, especially near
plugs, convenience receptacles, and the point
where they exit from the appliance.
13. Cleaning – The appliance should be cleaned
only as recommended by the manufacturer.
14. Power Lines – An outdoor antenna should
be located away from power lines.
15. Nonuse Periods – The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.
16. Object and Liquid Entry – Care should be
taken so that objects do not fall and liquids
are not spilled into the enclosure through
openings.
17. Damage Requiring Service – The appliance
should be serviced by qualified service
personnel when:
A. The power-supply cord or the plug has
been damaged; or
B. Objects have fallen, or liquid has been
spilled into the appliance; or
C. The appliance has been exposed to rain;
or
D. The appliance does not appear to operate
normally or exhibits a marked change in
performance; or
E. The appliance has been dropped, or the
enclosure damaged.
18. Servicing – The user should not attempt to
service the appliance beyond that described
in the operating instructions. All other
servicing should be referred to qualified
service personnel.
19. Outdoor Antenna Grounding – If an
outside antenna is connected to the receiver,
be sure the antenna system is grounded so
as to provide some protection against voltage
surges and built up static charges. Article 810
of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna-discharge unit, size of grounding
conductors, location of antenna-discharge
unit, connection to grounding electrodes, and
requirements for the grounding electrode. See
Figure 1.
FIGURE 1:
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Before Using
Connections
Operation
Other Information
3
Precautions
1. Warranty Claim
You can find the serial number on the rear panel of
this unit. In case of warranty claim, please report this
number .
2. Care
From time to time you should wipe the front and
rear panels and the cabinet with a soft cloth. For
heavier dirt, dampen a soft cloth in a weak solution
of mild detergent and water, wring it out dry, and
wipe off the dirt. Following this, dry immediately with
a clean cloth. Do not use rough material, thinners,
alcohol or other chemical solvents or cloths since
these could damage the finish or remove the panel
lettering.
3. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit will
be used meets the required voltage (e.g., AC 230 V,
50 Hz or AC 120 V, 60 Hz) written on the rear panel.
Setting the STANDBY button to standby does not
shut off the power completely. So the power cord
should be removed from the AC outlet when the
unit is not used for a prolonged time.
For British model
Replacement and mounting of an AC plug on the
power supply cord of this unit should be performed
only by qualified service personnel.
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Blue : Neutral
Brown: Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected
to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked with the
letter L or coloured red.
IMPORTANT
A 5 amp fuse is fitted in this plug. Should the fuse
need to be replaced, please ensure that the
replacement fuse has a rating of 5 amps and that it
is approved by AST A or BSI to BS1362. Check for the
ASTA mark or the BSI mark on the body of the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFEL Y. THERE IS A DANGER
OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF
PLUG IS INSERTED INTO ANY 13 AMP SOCKET.
If in any doubt, please consult a qualified electrician.
4
For U.S. model
Note to CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC,
ANSI/NFPA 70, which provides guidelines for proper
grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system
of the building, as close to the point of cable entry
as practical.
FCC Information for User
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
For Canadian model
For models having a power cord with a polarized
plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MA TCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modele pour les Canadien
Sur les modèles dont la fiche est polarisée:
A TTENTION:
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.
POUR ÉVITER LES CHOCS ÉLECTRIQUES,
Table of contents
Connections
Connecting to the ONKYO Separate Collection Series Components ................ 6
Connecting to other components ................................................................... 8
Antenna connections .................................................................................... 10
Operation
Setting the Clock .......................................................................................... 12
Receiving stations ......................................................................................... 16
Naming a preset station ................................................................................ 19
Receiving RDS (European models only) .......................................................... 22
Using the timer ............................................................................................. 23
Other Information
Troubleshooting ............................................................................................ 30
Index to parts and controls............................................................................31
Specifications................................................................................................ 32
Supplied accessories
Check that the following accessories are supplied with this unit.
Before Using
Audio connection cable × 1
AM loop antenna × 1
(only available on the U.S. and Canadian models)
remote control cable × 1
Declaration of Conformity
We,
ONKYO EUROPE
ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3 (or EN60555-2, -3)
GERMERING, GERMANY
ONKYO EUROPE ELECTRONICS GmbH
K.OTSU
FM indoor antenna × 1
(not available on the U.S. and Cnadian models)
T-shaped FM indoor antenna × 1
(only available on the U.S. and Canadian models)
Memory Preservation
This unit does not require memory preservation batteries.
A built-in memory power back-up system preserves the
contents of the memory during power failures and even
when the unit is unplugged. The unit must be plugged
in order to charge the back-up system.
The memory preservation period after the unit has been
unplugged varies depending on climate and placement
of the unit. On the average, memory contents are
protected over a period of a few weeks after the last
time the unit has been unplugged. This period is shorter
when the unit is exposed to a highly humid climate.
5
Connections
Connecting to the ONKYO Separate Collection Series Components
This section introduces you to the other Separate Collection Series system components and their
convenient system functions, followed by instruction on how to connect the system.
The following Separate Collection Series components are available:
• A-905X ....... Integrated Stereo Amplifier
• C-705X ....... Compact Disc (CD) Player (Not available in U.S. and Canada)
• C-707CH .... Compact Disc (CD) Changer (Only available in U.S. and Canada)
• K-505X ....... Stereo Cassette Tape Deck
• MD-105X ... Minidisc (MD) Recorder (Not available in U.S. and Canada)
Note that the available components may vary according to the area.
Combining the T-405X Stereo tuner with the above system components enables you to operate the
following convenient functions:
• Auto Power On
– You can turn on the power to the amplifier by pressing the STANDBY/ON button on one of the
system components. (The amplifier’s POWER switch must be set to ON.)
– When the amplifier's POWER switch is set to ON, you can turn on the power to all the system
components simultaneously by pressing the STANDBY/ON button on the amplifier.
Afterwards, you can turn off the power to the individual components that are not in use.
• Direct Change
Press the following button on the component you want to operate. The amplifier will automatically
select the input from the corresponding component:
– The play button on the CD player (or changer), MD recorder, or stereo cassette tape deck; or
– The PRESET √/® buttons on the tuner.
• Remote Control Operation
You can operate all the system components using the remote controller supplied with the amplifier
A-905X.
• Program Timer
You can operate the timer playback and recording functions using the T-405X (see page 23).
• Sleep Timer
You can fall asleep to a music/radio program using the timer (see page 29).
• CD Dubbing
Simple CD dubbing using a stereo cassette tape deck or MD recorder is possible with the pr essing of
a single button (CD dubbing function using an MD recorder is not avalable on the C-707CH). (Refer
to the K-505X or MD-105X Instruction Manual for more information).
• CD/MD Synchro Recording
When using a stereo cassette tape deck or MD recorder to r ecor d fr om the CD player or when using
a stereo cassette tape deck to record from an MD recorder, you can record with simply starting on a
CD player or MD recorder . (Refer to the K-505X or MD-105X instruction manual for mor e information.)
• Dubbing a specific track from CD
Y ou can specify a track on a CD and easily dub it to a connected MD r ecorder. (Refer to the MD-105X
instruction manual for more information.)
6
System connection for use of Timer function
If you wish to use the Timer function of this unit in your system, connect the power cord as shown
below and connect the
• Be sure to connect the power cord of this unit to an AC outlet that supplies continuous power.
• Turn on the POWER switch on the amplifier A-905X. If you turn off the POWER switch, the Timer
function setting will be cancelled.
• Be sure to make the audio cable connection. Refer to the instruction manual for the A-905X for
information on audio cable connection.
Cassette tape
deck (K-505X) or
MD recorder
(MD-105X)
cable and audio connection cables.
ANALOG
REMOTE
INPUT OUTPUT
CONTROL
(REC) (PLAY)
DIGITAL INPUT
L
R
OPTICAL
L
12
R
AC OUTLET
AC230V 50Hz
UNSWITCHED
100W MAX.
MINIDISC RECORDER
MD-105X
ANTENNA
FM STEREO TUNER
FM
75
MODEL NO.
T-405X
OUTPUT
REMOTE
CONTROL
L
R
AC OUTLET
AC230V 50Hz
UNSWITCHED
100W MAX.
To wall
outlet
Tuner
(T-405X)
Before Using
CD player
(C-705X) or
CD changer
(C-707CH)
cable
ANALOG
OUTPUT
L
R
REMOTE
CONTROL
COMPACT DISC PLAYER
MODEL NO.
DIGITAL OUTPUT
OPTICAL
12
C-705X
AC OUTLET
AC230V 50Hz
UNSWITCHED
100W MAX.
"CLASS 1 LASER
PRODUCT "
L
R
OUT(REC)
LINE-1LINE-2
L
R
TUNER
CD
cable
IN(PLAY)
L
SPEAKERS
R
REMOTE
TAPE
CONTROL
IN(PLAY)
OUT(REC)
OUT
MD
PROCESSOR
L
INTEGRATED
STEREO AMPLIFIER
A-905X
MODEL NO.
RATING;
R
IN
SUBWOOFER
PRE OUT
AC OUTLET
AC230V 50Hz
SWITCHED
100W MAX.
Amplifier
(A-905X)
cable
Notes
Y ou can turn off the power to the entir e system by simply turning off the POWER switch on the A-905X
Amplifier, refer to the A-905X instruction manual for more information.
The 230 V models are shown in the illustrations.
Using the remote controller
The unit is not shipped with a remote controller.
However, you may use a remote controller (RC398S) that is supplied with A-905X amplifier to
operate the unit.
Be sure to make the
connection securely. If
the connection is incomplete, you cannot use the
remote controller to operate the unit.
Point the remote controller toward the remote
control sensor of A-905X.
A-905X
Remote control
sensor
30°
30°
RC-398S
T-405X
5m
Notes
• Place the unit away from strong light such as direct
sunlight or inverted fluorescent light which can
prevent proper operation of the remote controller.
• Using another remote controller of the same
type in the same room or using the unit near
equipment which uses infrared rays may cause
operational interference.
Do not put any object such as a book on the remote
•
controller . The buttons of the remote controller may
be pressed by mistake and drain the batteries.
• Make sure the audio rack doors do not have
colored glass. Placing the unit behind such doors
may prevent proper remote controller operation.
• If there is any obstacle between the remote
controller and the remote control sensor, the
remote controller will not operate.
Connections
Operation
Other Information
7
Connecting to other components
Before connecting
• Do not connect the unit’s AC power cord to a wall outlet until you have completed all the other
connections.
• On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a
white connector (marked L) to the left channel. Connect white plugs of audio connection cables to
L connectors and connect red plugs of audio connection cables to R connectors .
Audio connection cable
To L connectors
To R connectors (Red)
• Insert the plug securely. If the connection is incomplete, noise or malfunction may result.
Improper connection
Insert completely
• Bundling an audio connection cable with the power cord or speaker cord may degrade the sound
quality.
Note:
The 230 V model is shown in the following illustrations.
Connections
(White)
(White)
(Red)
To L connectors
To R connectors
MODEL NO.
FM STEREO TUNER
FM
ANTENNA
75
Antenna
connections
(See pages 10, 11)
T-405X
OUTPUT
L
R
See
next page.
REMOTE
CONTROL
2
AC OUTLET
AC230V 50Hz
UNSWITCHED
100W MAX.
To wall
outlet
1
LR
TUNER
Amplifier
8
1 Connecting the amplifier
Connect the tuner’s OUTPUT jacks and the amplifier’s TUNER input jacks using the audio connection
cable. Refer to the amplifier’s instruction manual for connection information.
2 AC outlet (UNSWITCHED)
The AC power cord of another
component can be connected to this AC
OUTLET connector.
This means that if the T-405X is plugged
into an AC outlet, AC power is available
ANTENNA
FM STEREO TUNER
FM
75
MODEL NO. T-405X
OUTPUT
REMOTE
CONTROL
AC OUTLET
AC230V 50Hz
UNSWITCHED
100W MAX.
to this AC OUTLET even if the T-405X is
off.
The shape and capacity of the AC outlet
may differ depending on the area of
purchase. Make sure that the capacity of
other components connected to this unit
Capacity is
100 watts.
120 V, 60 Hz models230 V, 50 Hz models
Capacity is
120 watts.
does not exceed the capacity that is
printed on the rear panel.
Connecting the connector
If you are using other ONKYO components equipped with connectors, you can control these components using the amplifier‘s remote controller.
Before connecting
• The amplifier must be connected to the
• Each component has two
connectors. There is no difference between these connectors.
• The components may be connected in any order.
• Remote control operation is not possible if only the
connectors. Connect the audio connection cables correctly.
The illustration is an example of an
hookup. With these hookups, you can use
the Program Timer function. (See “Using the
timer” on page 23).
For the Program Timer function, at least the
unit and amplifier must be connected via the
connectors.
Note
An
remote control cable equipped with
a 1/8 in. (3.5mm) diameter miniature twoconductor phone plug is included with this
unit and with every compact disc player and
cassette deck that bears the
mark.
system hookups for control operations.
remote control cable is connected to the
T-405X
Amplifier
Stereo cassette deck
REMOTE
CONTROL
Supplied
cable
cable
cable
Before Using
Connections
Operation
Other Information
CD player
9
Antenna connections
Connecting the FM antenna
Connecting the antenna cable
1. Open the lever. 2. Insert the wire.
FM indoor antenna
The supplied FM antenna is for indoor use only. Move the antenna in various directions until the
clearest signal is received. Fix it with push pins or similar implements in the position that will cause the
least amount of distortion.
U.S. and Canadian models
3. Close the lever.
Other models
ANTENNA
300
AM
FM
ANTENNA
75
FM outdoor antenna
If the reception is not very clear with the supplied FM antenna, the use of an outdoor antenna is
recommended.
Please make sure that you follow the considerations below regarding the location.
• Keep the antenna away from noise sources (neon signs, busy roads etc.).
• It is dangerous to put the antenna close to power lines. Keep it well away from power lines, etc.
• To avoid the risk of lightning and electrical shock, grounding is necessary. Follow item 19 of the
“Important Safeguards” on page 3 when you install the outdoor antenna.
10
U.S. and Canadian models
75
300
ANTENNA
FM
75 ohms
coaxial cable
AM
Other models
ANTENNA
FM
75
FM
75
Loading...