C-SAT.fm 1 ページ ２００７年３月２９日 木曜日 午前１１時４７分
Using the Main Unit with <C-SAT> Tuner Board
Instruction Manual for ONKYO TX-NR1000 / Integra DTR-10.5 / Integra Research RDC-7.1
Thank you for purchasing the Tuner Board <C-SAT>. When this optional board is inserted into option slot “K” on the main unit’s
rear panel, it can be used as the XM or SIRIUS/FM Stereo/AM tuner terminal. Furthermore, <C-SAT> becomes capable of
supporting RDS.
Usage varies depending on the main unit to which you want to add the optional board. Refer to the user’s manual that comes with
your main unit before starting operations.
For some main units, instructions may be provided in the user’s manual. In this case, please find instructions in the manual
that comes with your main unit.
Caution:
• Before connecting or disconnecting the board, make sure to power off the main unit, and then unplug the power cord from the
AC outlet. Connecting or disconnecting the board while power is being supplied to the main unit may cause failure.
• Plug the optional board into the individual designated slot. Plugging it into the wrong slot may cause failure.
Supplied Accessories
Verify the following items are included in the package:
Board
Allen wrench (1 EA)
Hand screws for
removing board
Hexagon
screwsFM antennaAM antenna
1
T
/
C
C-SAT.fm 2 ページ ２００７年３月２９日 木曜日 午前１１時４７分
Installing Board
■
■
Power off the main unit, and then unplug the
1
power cord from the AC outlet.
Remove the “K” sub-panel or board from the
2
main unit to which you want to add on the
optional board.
If any other slot is already used:
Remove the hexagon screws, one
top and one bottom of slot “K,”
O
E
D
I
V
IN
Y
B
P
R
P
Y
B
P
R
P
E
T
O
M
E
R
L
O
R
T
N
O
C
K
A
N
N
E
T
N
A
.
X
A
M
A
m
0
0
1
B
.
X
A
M
A
m
0
0
1
D
N
I
A
M
F
M
5
7
2
E
N
O
Z
3
E
N
O
Z
M
A
T
U
O
N
I
R
I
using the provided Allen wrench
in the same way described below.
V
2
1
R
E
G
G
I
R
T
T
U
O
A
.
X
A
M
A
m
0
0
2
Retain the hexagon screws for
C
.
X
A
M
A
m
0
0
1
E
.
X
A
M
A
m
0
0
subsequent reuse.
1
Next, introduce the hand screws
attached to the board into the top
UPP
and bottom screw holes, and
3
drive them in as deep as about 3/
16" (5 mm). Hold the screw
heads to pull out the board.
If this is the first time a slot is used:
O
E
D
I
V
T
N
E
N
O
P
M
O
IN
)
BNC
Y
B
P
R
P
T
U
O
Y
B
P
R
P
R
E
T
O
M
E
R
L
O
R
T
N
O
C
.
X
A
M
A
m
0
0
1
B
.
X
A
M
A
m
0
0
1
D
N
I
A
M
2
E
N
O
Z
3
E
N
O
Z
T
U
O
N
I
R
I
loosen the hexagon screws, one
top and one bottom of slot “K,” to
V
2
1
R
E
G
G
I
R
T
T
U
O
A
.
X
A
M
A
m
0
0
2
remove the sub-panel from the
C
.
X
A
M
A
m
0
0
1
E
.
X
A
M
A
m
0
rear panel. In doing so, loosen the
0
1
screws gradually while holding
UPP
the sub-panel to prevent it from
falling. Retain the hexagon
Using the provided Allen wrench,
2
23
S
screws for subsequent reuse.
Remove the sealing sticker carefully and take
the board out of the bag.
Do not touch any parts, solder
surfaces, or contact points of the
connectors with bare hands to
prevent electrostatic damage on
the circuit. Be sure to hold the
outer edges or panel part of the printed circuit board.
2
T
C-SAT.fm 3 ページ ２００７年３月２９日 木曜日 午前１１時４７分
Insert the option board along the upper and
4
lower guide rails.
O
E
D
I
V
N
I
Y
B
P
R
P
Y
B
P
R
P
Fix the option board firmly to the main unit
5
using the hexagon screws on the top and bot-
E
T
O
M
E
R
L
O
R
T
N
O
C
K
.
X
A
M
A
m
0
0
1
B
.
X
A
M
A
m
0
0
1
D
N
I
A
M
2
E
N
O
Z
3
E
N
O
Z
U
O
N
I
R
I
When the board hits the connector,
V
2
1
apply a little more pressure so that
R
E
G
G
I
R
T
T
U
O
A
.
X
A
M
A
m
0
0
2
the connector can be inserted com-
C
.
X
A
M
A
m
0
0
1
E
.
X
A
M
A
m
0
0
1
pletely. Make sure the surface of
the panel becomes flush for perfect
insertion.
UPP
T
tom.
Make sure to fasten the two screws
32
2
S
K
O
E
D
I
V
IN
Y
B
P
R
P
Y
B
P
R
P
R
E
T
O
M
E
R
L
O
R
T
N
O
C
.
X
A
M
A
m
0
0
1
B
.
X
A
M
A
m
0
0
1
D
N
I
A
M
2
E
N
O
Z
3
E
N
O
Z
O
N
I
R
I
completely. If they are loose, the
electrical contact between the ter-
V
2
1
R
E
G
G
I
R
T
T
U
O
minals and the ground or the signal
A
.
X
A
M
A
m
0
0
2
C
.
X
A
M
A
m
0
0
1
line may be poor and it may cause
E
.
X
A
M
A
m
0
0
1
failure.
UPP
Caution:
T
U
Be sure to fasten the screws with
washers, if exist, that were previously used to secure any board on the
slot.
3
C-SAT.fm 4 ページ ２００７年３月２９日 木曜日 午前１１時４７分
Using XM Satellite Radio
Listening to XM Satellite Radio
Important XM Radio Information
XM Satellite Radio offers an extraordinary variety of
commercial-free music, plus the best in sports, news,
talk and entertainment. XM is broadcast in superior digital audio from coast to coast. From rock to reggae,
from classical to hip hop, XM has something for every
music fan. XM’s dedication to playing the richest selection of music is matched by its passion for live sporting
events, talk radio, up-to-the-minute news, stand-up
comedy, children’s programming, and much more. For
U.S. customers, information about XM Satellite Radio
is available online at
www.xmradio.com. For Canadian customers, information about XM Canada is online at
www.xmradio.ca.
Note:
Hardware and required monthly subscription sold separately.
Other fees and taxes, including a one-time activation fee may
apply. Subscription fee is consumer only.
®
All fees and programming subject to change. Channels with
frequent explicit language are indicated with an XL. Channel
blocking is available for XM radio receivers by calling 1-800XMRADIO (US residents) and 1-877-GET-XMSR (Canadian
residents).
For a full listing of the XM commercial-free channels and
advertising-supported channels, visit
lineup.xmradio.com (US residents) or xmradio.ca (Canadian
residents).
Subscriptions subject to Customer Agreement available at
xmradio.com (US residents) and xmradio.ca (Canadian residents). Only available in the 48 contiguous United States and
Canada. ©2007 XM Satellite Radio Inc. All rights reserved.
All other trademarks are the property of their respective owners.
4
C-SAT.fm 5 ページ ２００７年３月２９日 木曜日 午前１１時４７分
A warning against reverse engineering:
It is prohibited to, and you agree that you will not, copy,
decompile, disassemble, reverse engineer, hack, manipulate,
or otherwise access and/or make available any technology
incorporated in receivers compatible with the XM Satellite
Radio system. Furthermore, the AMBE
®
voice compression
software included in this product is protected by intellectual
property rights including patent rights, copyrights, and trade
secrets of Digital Voice Systems, Inc. The software is licensed
solely for use within this product. The user of this or any other
software contained in an XM Radio is explicitly prohibited
from attempting to copy, decompile, reverse engineer, hack,
manipulate or disassemble the object code, or in any other way
convert the object code into human-readable form.
Connecting the XM Mini-Tuner and Home Dock
To receive XM Satellite Radio, you need an XM Mini-Tuner
and Home Dock, which includes a home antenna. These are
sold separately. For connection information, refer to the
instruction manual supplied with the XM Mini-Tuner and
Home Dock.
XM Mini-Tuner jack
5
C-SAT.fm 6 ページ ２００７年３月２９日 木曜日 午前１１時４７分
You can use your main unit and the remote controller supplied with your main unit to perform XM Radio operations.
Button names may vary depending on the model you use. The following table shows the button names of the main unit and of the
remote controller, respectively, and their corresponding operations.
XM Radio Operation Main Unit button names Remote Controller button names
FM-AM-XM band select
Channel Up/Down
Category Up/Down
TUNER/Tuner selector Scroll wheel
CONTROL/TUNING dial
Tuning Up/Down, /
Push SELECT/PRESET dial
/
/
/
Search Mode select
Previous Channel
Display
Preset
Preset Clear
Preset Up/Down
Direct Tuning
Setup Up/Down
Setup Left/Right
Setup Enter
TUNING MODE/Tuning Mode ENTER/Enter
EXIT/Exit RETURN/Return
DISPLAY/Display DISPLAY/Display
MEMORY/Memory -
MEMORY + TUNING MODE
Memory + Tuning Mode
SELECT/PRESET dial
Preset Up/Down
- DIRECT TUNING and Number buttons
SELECT/PRESET dial, / /
CONTROL/TUNING dial,
Push SELECT/PRESET dial, Enter ENTER/Enter
//
-
CH +/–
* In this Instruction Manual, all the button names are essentially provided in capital letters. On some models, however, the names may be different
and written in small letters except for their initial character. Refer to the above table for proper operations.
6
C-SAT.fm 7 ページ ２００７年３月２９日 木曜日 午前１１時４７分
7
XM
Setting the Satellite Radio Mode
Press the [SETUP] button.
1
Use the [ ]/[ ] buttons to select “Hardware
2
Setup,” and then press [ENTER].
Use the [ ]/[ ] buttons to select “SAT Radio,”
3
and then press [ENTER].
Use the [ ]/[ ] buttons to select “XM.”
4
None : Select if you’re not using satellite radio.
: Select to use XM Satellite Radio.
SIRIUS : Select to use SIRIUS Satellite Radio.
Press the [SETUP] button.
5
Selecting XM Satellite Radio
Press the [TUNER] input selector button
1
repeatedly to select XM.
Signing Up for XM Satellite Radio
Before you can use XM Satellite Radio, you must first sign up for
an account. You’ll need a major credit card and your XM Satellite
Radio ID, which you can get from the main unit, as explained
below, or from the Mini-Tuner System package and itself.
Use the [ ]/[ ] buttons or CONTROL/TUNING
1
dial to select “RADIO ID.”
Your XM Satellite Radio ID number is displayed. Write
it below.
ID
To sign up, go to:
2
http://activate.xmradio.com
Or call: 1-800-967-2346
For XM Canada, go to:
http://xmradio.ca
Or call: 1-877-GET-XMSR
Notes:
• “RADIO ID” cannot be selected in Category Search mode.
You must select Channel Search mode (see page 8).
• The following letters are not used in XM Satellite Radio
IDs: I, O, S, F.
C-SAT.fm 8 ページ ２００７年３月２９日 木曜日 午前１１時４７分
■
■
■
Selecting XM Radio Channels
There are three ways to select XM radio channels:
• Channel Search mode: select any channel.
• Category Search mode: select channels by category.
• Direct tuning: enter channel number.
Channel Search Mode
Press the [ENTER] or [TUNING MODE] button
1
to select “Channel Search” mode.
Use the [ ]/[ ] buttons or CONTROL/TUNING
2
dial to select a channel.
You can also use the [ ]/[ ] buttons or push
SELECT/PRESET dial to select a category.
Category Search Mode
Press the [ENTER] or [TUNING MODE] button
1
to select “Category Search” mode.
Use the [ ]/[ ] buttons to select a category, and
2
use the [ ]/[ ] buttons to select a channel in
that category.
Or push the SELECT/PRESET dial to select a category,
and rotate the CONTROL/TUNING dial to select a
channel in that category.
Direct Tuning
You can select an XM radio channel directly by entering its
number by remote controller.
Press the [DIRECT TUNING] button.
1
Within 8 seconds, use the number buttons to
2
enter the channel number.
The channel is selected.
For example, to select channel #20, press 0, 2, 0, or 2, 0,
[ENT].
Selecting the Previous Channel:
To listen to the previously selected XM channel, press the
[RETURN] or [EXIT] button.
8
C-SAT.fm 9 ページ ２００７年３月２９日 木曜日 午前１１時４７分
■
■
Presetting XM Radio Channels
You can store a combination of up to 40 of your favorite XM
channels and AM/FM radio stations as presets.
Tune into the XM channel that you want to store
1
as a preset.
Press the [MEMORY] button.
2
The MEMORY indicator appears and the preset number
flashes.
While the MEMORY indicator is displayed
3
(about 4 seconds), use the SELECT/PRESET
dial or Preset Up/Down buttons to select a preset number from 1 through 40.
Press the [MEMORY] button again to store the
4
channel.
The channel is stored and the preset number stops flashing.
Repeat this procedure for all of your favorite XM channels.
Selecting Presets
To select a preset, use the SELECT/PRESET
1
dial or Preset Up/Down buttons, or the remote
controller’s CH [+/–] button.
Deleting Presets
Select the preset that you want to delete.
1
See the previous section.
While holding down the [MEMORY] button,
2
press the [TUNING MODE] button.
The preset is deleted and its number disappears from the
display.
9
C-SAT.fm 10 ページ ２００７年３月２９日 木曜日 午前１１時４７分
■
■
Displaying XM Radio Information
Press the [DISPLAY] button repeatedly to cycle
through the available information.
Channel Number
Channel Name Preset Number
The indication on the Channel Name switches among the following titles:
Channel name
Category name (CAT)
Artist name (NAME)
Song title (TITL)
Listening Mode
Note:
• If the category, artist, or song title is not available,
“- - -” will be displayed instead.
Displaying XM Information on Your TV
When you select a different XM channel, or the artist or song
title changes, the following information is displayed on your
TV for 3 seconds.
XM
0 5ch50
CHANNEL : Channel name
CAT: Category name
NAME: Artist name
TITLE: Song title
Tip:
You can display this information at anytime by pressing the
[DISPLAY] button.
XM Radio Messages
The following messages may appear while using XM radio.
CHECK ANTENNA
The XM antenna is not properly connected to the Mini-Tuner
Dock. Check the connection. Check the antenna cable for
damage.
UPDATING
XM is updating your Mini-Tuner with the latest encryption
code. Simply wait a few seconds until the update is done. OR,
You may be attempting to tune to a channel that is blocked or
that you cannot receive with your subscription package. To
receive that channel, contact XM Satellite Radio.
NO SIGNAL
The XM Mini-Tuner can not receive the satellite signal. Check
the XM antenna for obstructions to the southern sky. Check the
antenna positioning with the Antenna Aiming feature.
LOADING
The AV receiver is tuning or decoding audio or text data.
Please wait. If this occurs often, check the XM antenna position with the Antenna Aiming feature.
10
C-SAT.fm 11 ページ ２００７年３月２９日 木曜日 午前１１時４７分
OFF AIR
The XM channel you selected is not currently broadcasting.
Select another channel.
XM Listener Care phone number:
US: 1-800-967-2346
Canada: 1-877-438-9677
Positioning the XM Mini-Tuner System
You can check the signal strength of the XM radio signal and
adjust the position of the XM Mini-Tuner System accordingly.
Press the [SETUP] button.
1
Use the [ ]/[ ] buttons to select “SAT Radio
2
Setup,” and then press [ENTER].
Use the [ ]/[ ] buttons to select “Antenna
3
Aiming,” and then press [ENTER].
Adjust the position of the XM Mini-Tuner
4
Antenna so that the Satellite signal strength
bar is as long as possible.
The best signal is acheived when the antenna
is pointing to the southern sky through an
unobstructed window.
If you can’t receive the “Satellite” signal, adjust your
XM Mini-Tuner System so that the “Terrestrial” signal
strength bar is as long as possible.
Terrestrial signals are only available in certain areas.
So long as the signal strength is good, you can enjoy
XM Radio by using either satellite or terrestrial reception.
Press the [ ] button to display “Terrestrial” signal on
the main unit’s display.
11
C-SAT.fm 12 ページ ２００７年３月２９日 木曜日 午前１１時４７分
Using SIRIUS Satellite Radio
®
Listening to SIRIUS Satellite Radio
Important SIRIUS Satellite Radio Information
SIRIUS is available in the US for subscribers with
addresses in the continental US and is available in
Canada for subscribers with a Canadian address. To
Get SIRIUS Satellite Radio a subscription and
compatible tuner and antenna are required and sold
separately. Visit sirius.com for the most complete
and up-to-date channel lineup and information.
Note:
Hardware and required basic monthly subscription sold separately. Installation costs and other fees and taxes, including a
one-time activation fee may apply. Subscription fee is consumer only. All fees and programming subject to change.
“SIRIUS” and the SIRIUS dog logo are
registered trademarks of Sirius Satellite
Radio Inc.
What is SIRIUS Satellite Radio?
Simply The Best Radio on Radio™ with all your favorite
entertainment including 100% commercial-free music, plus
superior sports coverage, uncensored talk and comedy, worldclass entertainment, news, weather and more for your car,
home or office. For more information visit sirius.com or siriuscanada.ca
A warning against reverse engineering:
It is prohibited to copy, decompile, disassemble, reverse
engineer, or manipulate any technology incorporated in tuner
boards compatible with the SIRIUS Satellite Radio system.
12
C-SAT.fm 13 ページ ２００７年３月２９日 木曜日 午前１１時４７分
13
Setting Up the SiriusConnect™ Home Tuner
The optional SiriusConnect Home tuner kit includes everything for easy home installation, including the SiriusConnect
receiver, indoor/outdoor antenna with 21-foot cable, 8-pin
mini DIN connector cable, and an AC power adapter. See the
SiriusConnect Home tuner’s instructions for more information.
Use the 8-pin mini DIN connector cable to connect the SiriusConnect receiver to the SIRIUS jack on the board.
Indoor/outdoor antenna
with 21 foot cable
SiriusConnect
receiver
8-pin mini DIN
connector cable
SIRIUS
jack
To use the included antenna indoors, you must place it at a
north-, west-, or east-facing window, depending on where you
live. If this isn’t possible, you’ll need to install it outside, away
from any overhead obstructions.
AC power
Positioning the Antenna
For a consistent satellite signal, the antenna must be positioned
correctly. Use the following map to determine which area you
are in and position the antenna accordingly.
Area 1: Point the antenna toward the sky in the east , north-
east , or southeast , either through a window or outside.
Area 2: Point the antenna toward the sky in the north or north-
east , either through a window or outside.
Area 3: Point the antenna toward the sky in the north or north-
west , either through a window or outside.
Area 4: Point the antenna toward the sky in the west , north-
west , or southwest , either through a window or outside.
Area 5: Put the antenna outside and point it straight up . The
antenna cannot be used indoors.
SKY
NORTH
1
WEST EAST
5
2
SOUTH
4
3
HORIZON
C-SAT.fm 14 ページ ２００７年３月２９日 木曜日 午前１１時４７分
You can use your main unit and the remote controller supplied with your main unit to perform Sirius Satellite Radio operations.
Button names may vary depending on the model you use. The following table shows the button names of the main unit and of the
remote controller, respectively, and their corresponding operations.
Sirius Radio Operation Main Unit button names Remote Controller button names
FM-AM-Sirius band select
Channel Up/Down
Category Up/Down
TUNER/Tuner selector Scroll wheel
CONTROL/TUNING dial
Tuning Up/Down, /
Push SELECT/PRESET dial
/
/
/
Search Mode select
Previous Channel
Display
Preset
Preset Clear
Preset Up/Down
Direct Tuning
Setup Up/Down
Setup Left/Right
Setup Enter
* In this Instruction Manual, all the button names are essentially provided in capital letters. On some models, however, the names may be different
and written in small letters except for their initial character. Refer to the above table for proper operations.
TUNING MODE/Tuning Mode ENTER/Enter
EXIT/Exit RETURN/Return
DISPLAY/Display DISPLAY/Display
MEMORY/Memory -
MEMORY + TUNING MODE
Memory + Tuning Mode
SELECT/PRESET dial
Preset Up/Down
- DIRECT TUNING and Number buttons
SELECT/PRESET dial, / /
CONTROL/TUNING dial,
Push SELECT/PRESET dial, Enter ENTER/Enter
//
-
CH +/–
14
C-SAT.fm 15 ページ ２００７年３月２９日 木曜日 午前１１時４７分
15
XM
Setting the Satellite Radio Mode
Press the [SETUP] button.
1
Use the [ ]/[ ] buttons to select “Hardware
2
Setup,” and then press [ENTER].
Use the [ ]/[ ] buttons to select “SAT Radio,”
3
and then press [ENTER].
Use the [ ]/[ ] buttons to select “SIRIUS.”
4
None : Select if you’re not using satellite radio.
SIRIUS : Select to use SIRIUS Satellite Radio.
: Select to use XM Satellite Radio.
Press the [SETUP] button.
5
Selecting SIRIUS Satellite Radio
Press the [TUNER] input selector button
1
repeatedly to select “SIRIUS.”
Signing Up for SIRIUS Satellite Radio
Before you can use SIRIUS Satellite Radio, you must first sign
up for an account. You’ll need a major credit card and your
SIRIUS Satellite Radio ID, which you can get from the main
unit, as explained below, or from the SiriusConnect Home
tuner package.
Press [SETUP] button.
1
Use the [ ]/[ ] buttons to select "SAT Radio
2
Setup," and then press [ENTER].
Use the [ ]/[ ] buttons to select "Sirius ID,"
3
and then press [ENTER].
Your SIRIUS Satellite Radio ID number is displayed.
Write it below.
ID
To sign up, go to:
4
http://activate.siriusradio.com
Or call: 1-888-539-SIRIUS (7474)
C-SAT.fm 16 ページ ２００７年３月２９日 木曜日 午前１１時４７分
■
■
■
Selecting SIRIUS Satellite Radio Channels
There are three ways to select channels:
• Channel Search mode: select any channel.
• Category Search mode: select channels by category.
• Direct tuning: enter channel number.
Channel Search Mode
Press the [ENTER] or [TUNING MODE] button
1
to select “Channel Search” mode.
Use the [ ]/[ ] buttons or CONTROL/TUNING
2
dial to select a channel.
You can also use the [ ]/[ ] buttons or push
SELECT/PRESET dial to select a category.
Category Search Mode
Press the [ENTER] or [TUNING MODE] button
1
to select “Category Search” mode.
Use the [ ]/[ ] buttons to select a category,
2
and use the [ ]/[ ] buttons to select a channel in that category.
Or push the SELECT/PRESET dial to select a category,
and use the CONTROL/TUNING dial to select a channel in that category.
Direct Tuning
You can select a SIRIUS Satellite Radio channel directly by
entering its number by remote controller.
Press the [DIRECT TUNING] button.
1
Within 8 seconds, use the number buttons to
2
enter the channel number.
The channel is selected.
For example, to select channel #20, press 0, 2, 0, or 2, 0,
[ENT].
Selecting the Previous Channel:
To listen to the previously selected SIRIUS Satelite Radio
channel, press the [RETURN] or [EXIT] button.
16
C-SAT.fm 17 ページ ２００７年３月２９日 木曜日 午前１１時４７分
■
■
Presetting SIRIUS Channels
You can store a combination of up to 40 of your favorite SIRIUS Satellite Radio channels and AM/FM radio stations as
presets.
Tune into the SIRIUS channel that you want to
1
store as a preset.
Press the [MEMORY] button.
2
The MEMORY indicator appears and the preset number
flashes.
While the MEMORY indicator is displayed
3
(about 4 seconds), use the SELECT/PRESET
dial or Preset Up/Down buttons to select a preset number from 1 through 40.
Press the [MEMORY] button again to store the
4
channel.
The channel is stored and the preset number stops flashing.
Repeat this procedure for all of your favorite SIRIUS
Satellite Radio channels.
Selecting Presets
To select a preset, use the SELECT/PRESET
1
dial or Preset Up/Down buttons, or the remote
controller’s CH [+/–] button.
Deleting Presets
Select the preset that you want to delete.
1
See the previous section.
While holding down the [MEMORY] button,
2
press the [TUNING MODE] button.
The preset is deleted and its number disappears from the
display.
17
C-SAT.fm 18 ページ ２００７年３月２９日 木曜日 午前１１時４７分
■
❑
❑
❑
❑
■
❑
Displaying SIRIUS Satellite Radio Information
Press the [DISPLAY] button repeatedly to cycle
through the available information.
The indication on the Channel Name switches among the fol-
Channel Name Preset Number
lowing titles:
Channel name
Category name (CAT)
Artist/Composer name (NAME)
Song title (TITL)
Listening Mode
Note:
• If the category, artist, or song title is not available, “- - -” will
be displayed instead.
Displaying Sirius Information on Your TV
When you select a different Sirius channel, or the artist or song
title changes, the following information is displayed on your
TV for 3 seconds.
S I R I US
CAT: Category name
NAME: Artist name
T I T L: Title name
OTHR: Composer name
0 5ch50
CH : Channel name
Channel Number
Tip:
You can display this information at anytime by pressing the
[DISPLAY] button.
SIRIUS Satellite Radio Messages
The following messages may appear while using SIRIUS Satellite Radio.
ACQUIRING SIGNAL
The SiriusConnect receiver is acquiring the signal or no
signal is present. Make sure the SiriusConnect Home tuner
is connected properly and that there are no obstacles close
by.
ANTENNA ERROR
Make sure the SiriusConnect Home tuner is connected
properly.
SUBSCRIPTION UPDATED
Displayed while your subscription is being updated. No
operations can be performed until this message has
cleared.
UPDATING CHANNELS XXX%
Displayed while the channel map is being updated. Wait
until the updating is complete.
UPDATING
Displayed while the SiriusConnect receiver’s firmware is
being updated.
18
C-SAT.fm 19 ページ ２００７年３月２９日 木曜日 午前１１時４７分
❑
❑
❑
INVALID CHANNEL
Displayed if you select an unavailable channel.
CALL SIRIUS
Displayed when you select a channel to which you are not
subscribed. Call SIRIUS if you want to subscribe.
CHECK SIRIUS TUNER
Displayed if the SiriusConnect receiver is not connected.
Make sure the SiriusConnect receiver is connected properly, and make sure its AC adapter is plugged in.
Positioning the SiriusConnect
™
Home Antenna
You can check the strength of the SIRIUS Satellite Radio signal and adjust the position of the SiriusConnect Home antenna
accordingly.
Press the [SETUP] button.
1
Use the [ ]/[ ] buttons to select “SAT Radio
2
Setup,” and then press [ENTER].
Use the [ ]/[ ] buttons to select “Antenna
3
Aiming,” and then press [ENTER].
Adjust the position of the SiriusConnect Home
4
antenna so that the SAT signal strength bar is
as long as possible.
If you can’t receive a satellite signal, adjust your
antenna so that the Terrestrial signal strength bar is as
long as possible.
Terrestrial signals are only available in certain areas.
So long as the signal strength is good, you can enjoy
SIRIUS Satellite Radio by using either satellite or terrestrial reception.
19
C-SAT.fm 20 ページ ２００７年３月２９日 木曜日 午前１１時４７分
Parental Lock
You can lock out channels that you do not want to receive.
Press the [SETUP] button.
1
Use the [ ]/[ ] buttons to select “SAT Radio
2
Setup,” and then press [ENTER].
Use the [ ]/[ ] buttons to select “Parental
3
Lock,” and then press [ENTER].
“Enter Code : <0>” appears on the display.
Enter the PIN number.
4
Use the [ ]/[ ] buttons to change the number displayed between the angle brackets < >, and then press
[ENTER].
Repeat this step to enter a four-digit number.
Use the [ ]/[ ] buttons to select “Lock/
5
Unlock,” and then press [ENTER].
Use the [ ]/[ ] buttons to select the channel
6
that you want to lock out.
Press the [ ]/[ ] buttons to select “Locked,”
7
and then press the [ENTER] button.
Press the [SETUP] button.
8
A locked channel is not displayed in “Channel Search”
and “Category Search” modes. When you have selected
a locked channel by direct tuning, you will be prompted
for PIN number. To listen to the channel, enter a correct
PIN number.
To unlock a previously locked channel, select the
“Unlocked” in the step 7.
20
C-SAT.fm 21 ページ ２００７年３月２９日 木曜日 午前１１時４７分
21
Changing the PIN Number
Press the [SETUP] button.
1
Use the [ ]/[ ] buttons to select “SAT Radio
2
Setup,” and then press [ENTER].
Use the [ ]/[ ] buttons to select “Parental
3
Lock,” and then press [ENTER].
Enter the PIN number.
4
For operation, refer to step 4 under "Parental Lock."
Use the [ ]/[ ] buttons to select “Edit Code,”
5
and then press [ENTER].
Enter a new PIN Code.
6
For operation, refer to step 4 under "Parental Lock."
Enter the new PIN number again.
7
A message appears saying "Complete" to indicate you
have successfully changed the PIN number.
If you enter the wrong PIN number, “Wrong Code!”
appears on the display. You’ll be returned to step 5, and
will need to start again.
Press the [SETUP] button.
8
Setup closes.
For some models with jog dials on the main unit:
To control setup, you can use the SELECT/PRESET dial
instead of the / buttons, and the CONTROL/TUNING
dial instead of the / buttons. To confirm your selection,
push the SELECT/PRESET dial in stead of the [ENTER] button.
C-SAT.fm 22 ページ ２００７年３月２９日 木曜日 午前１１時４７分
Receiving RDS Radio
RDS stands for Radio Data System and is a type of FM broadcasting. RDS was developed within the National Radio Systems Committee (NRSC) and is available in the North
America.
Many FM stations now transmit RDS signals which contain
additional information. RDS provides you with various services so that you can choose a station broadcasting your favorite categories of music or other information. The information
of Program Service Name, Radio Text and Program Type is
available for display on this tuner board
Listening to the RDS Radio
For information on how to connect FM antenna and to tune,
refer to the Instruction Manual for your main unit.
The RDS indicator lights up when an RDS station is
received.
RDS indicator
Note:
• If radio signals are weak, RDS may not be received.
Displaying RDS Information
Press the [DISPLAY] / [Display] button repeatedly to cycle
through the available information.
1. Frequency and Listening mode
(If available, Program Service Name will be displayed)
2. Radio Text
(if Radio Text available)
3. Program Type
22
C-SAT.fm 23 ページ ２００７年３月２９日 木曜日 午前１１時４７分
Memo
23
C-SAT.fm 24 ページ ２００７年３月２９日 木曜日 午前１１時４７分
En
SN 29344328
(C) Copyright 2007 ONKYO CORPORATION Japan. All rights reserved.
Printed in Japan
D0704-1
* 2 9 3 4 4 3 2 8 *
24
Loading...