One for All URC-7560 User Manual

Retain For Future Reference

USER GUIDE & CODE BOOK

Universal Remote

URC-7560

QUICK SET-UP

2

QUICK SEARCH

3

INSTALLING THE BATTERIES

4

THE KEYPAD

4

INSTALLATION

Setting up your TV 7
Setting up your other devices 8
The Search Method 9

SET-UP CODES

Quick Code Reference 11 Home Automation 21
Televisions 11 Amplifiers 21
Video Recorders 16 Amp/Tuners 21
Satellite Receivers 18 Cassette Players 21
Cable Converters 20 Laser Disc 21
CD/Mini Disc 20 Digital Audio Tape 21
Miscellaneous Audio 21 DVD 21

BSKYB AND ON DIGITAL INFORMATION

22

ADVANCED FEATURES

Controlling Colour and Brightness 23
Volume Punch-Through 23
Changing the Device Keys 24
Menu 25
Auto scan 26
Macros 28
Learning Feature 30
Home Theater 32
Key Magic 34
Telephone Upgradable Technology 35

TROUBLE-SHOOTING

Helpful Hints 36
Consumer Help-Line 37

Table of Contents

About Your ONE FOR ALL 6

Your ONE FOR ALL 6 Package contains:

Your ONE FOR ALL 6 Remote
Your ONE FOR ALL 6 Manual

Your manual is divided into two parts: set-up instructions and
device codes. You may need this guide again in the

future, so please be sure to keep it.

Your ONE FOR ALL 6 needs 2 new “AA/LR6” batteries.
Your ONE FOR ALL 6 is designed to let you use one remote to

operate your Video and Audio equipment; any device
designed to be operated by an infrared signal. This also
includes those devices which operate over 100 kHz. You can
choose any combination of six devices you would like to
operate. Also, what makes the ONE FOR ALL 6 even more
unique is the "Learning" feature which allows you to
customise any of the special functions of your original remote
control onto the keypad of your new ONE FOR ALL.
The following pages explain in simple steps how
to customize the ONE FOR ALL 6 to your home
entertainment needs.

l

i

f

t

h

e

r

e

Q

u

i

c

k

S

e

t

-

U

p

WWW.ONEFORALL.COM 1

Backlit
Device

Keys

Volume(-)

Menu down

Menu left

Rewind/

Text on

SP/LP/Red

Record/Yellow

Stop/Green

Pause/Hold
Fast Forward/

Expand

Programme(-)

Programme(+)

Menu up

Power

Home

Theater Key

Number

Keys

Custom

Keys

Teletext Keys
Auto/Blue

Play/Text off

Menu right
Volume(+)

Mute/OK

Menu

Magic

2

Quick Set-Up

The instructions below and on the next page
can be used to quickly install your new ONE
FOR ALL.

You can use the Quick Set-Up below with the
codes listed on pages 11-21. If this doesn’t
work, try the Quick Search on the next page.
The Quick Search can also be used even if
your brand is not listed at all.

Make sure you install the batteries in
your ONE FOR ALL before following the
instructions below.
Make sure your device is switched on
(not in standby).

Press device key:

Press and hold
until the device key blinks
twice (the device key will
blink once and then twice).
Then release

.

Enter
(4-digit code). See pages
11-21. The device key
will blink twice.

Aim remote at your
device and press
(or PLAY).

1.

2.

4.

3.

____

NOTES:

- The instructions above are a “Quick”
set-up guide. For further explanation,
please refer to the pages within.

- Make sure you write your Set-Up codes
in the boxes provided on page 11 and
inside the battery compartment for
easy future reference.

TV CDVCR

AUD

or
or

or orSAT

DVD

3

Quick Search

Aim your ONE FOR ALL at
your device and press a
device key:

Press and hold
until the device key blinks
twice. (The device key
will blink once then twice).

Press

Slowly alternate between
the device key ( )
and until your
device turns off.

When your device turns
off, press . The
device key will blink
twice. Your device is
set up.

1.

2.

4.

5.

3.

NOTES:

- During step 4, you may have to press
these keys many times, so please be
patient.

- If the original remote control does not
have a power key, press PLAY instead
of POWER during step 4.

ie:

Make sure your device is switched on
(not in standby).
Make sure you aim your ONE FOR ALL
at your device during “Quick Search”.

TV

TV CDVCR

AUD

or
or

or orSAT

DVD

4 WWW.ONEFORALL.COM

Installing the Batteries

Important notes:

- On the inside of the battery compartment door you will

find a label on which to write your Set-Up codes after
your ONE FOR ALL 6 is set up for your device. Please
write down your codes for easy, future reference.

- Do not use rechargable batteries

- Upon changing the batteries, your set-up codes and

advanced programming will be retained.

1

2

3

Your ONE FOR ALL 6 needs 2 new “AA/LR6” alkaline batteries.

Remove the battery cover from the
back of your ONE FOR ALL 6 by
pressing down on the tab.

Match the batteries to the + and ­marks inside the battery case, then
insert the batteries.

Press the battery cover back into
place.

Function

Magic Key

The Magic key is used to set up your ONE
FOR ALL 6 and to access special functions.

Menu Key

The Menu key (see page 25) controls the
same function as it did on your original
remote. If available on your original remote
control, this key will allow you to access the
Surround mode of your device.

Power Key

The Power key controls the same function as
it did on your original remote.

The Keypad

WWW.ONEFORALL.COM 5

Function

Backlit Device Keys

The TV, VCR, SAT, CD, AUD and DVD keys
select the home entertainment device to be
controlled. For example pressing the TV key
allows the remote to control the functions
of your Television, after pressing VCR you
can operate your Video Cassette Recorder,
etc. For more detailed information, please
refer to the chart on page 6. During
operation of the ONE FOR ALL the device
key will light up to indicate the mode you
are using.

Home Theater Key

This key is used to select the Home Theater
mode of the ONE FOR ALL remote control.
See page 32 for more information.

Volume, Programme Keys

The Volume and Programme keys control
the two most frequently used functions of
your devices. They operate just as the keys
on your original remote. These keys are also
used to adjust colour and brightness (see
page 23 for further explanation)

Directional Keys

If available on your original remote, these
keys will allow you to navigate through the
Menu (see page 25) and the Surround Sound
mode of your device.

Mute Key

The Mute key operates the same function it
did on your orginal remote control. It is also
used to activate the Scan feature (see page

26). Also, if your original remote control
required that you press an “OK” or “ENTER”
key during Menu operation, the Mute key
can be used for this function.

Number Keys

The Number keys (0-9, 10, 20) provide
functions just like your original remote, such
as direct access programme selection. If your
original remote uses one/two digit input
switching (-/-- symbol), this function can be
obtained by pressing the -/-- key, which is the
same as the 10 key. If your original remote
has a 20 key this function can be found
under the AV key.

The AV key operates the same function it
did on your original remote control. Also, if
your original remote control required that
you press an “EXIT” key during Menu
operation, the AV key can be used for this
function. In VCR mode it obtains the TV/VCR
function.

The Keypad

TV

CD

DVD

SAT

H

VCR

AUD

_

-/--

AV

AV

AV

AV

20

Function

Video Recorder Keys

After pressing the VCR key, the Video Recorder
keys operate the functions of your Video
Recorder. To prevent accidental recordings, the
Record key must be pressed twice to start
recording.
The SP/LP key controls the tape speed function,
the AUTO key controls the auto tracking
function just like on your original remote.

Teletext and Fastext Keys

After pressing the TV key, the top row of
the VCR keys is used to operate the main
Teletext functions. The symbols below the
keys are for Teletext. The text keys are used
to access the Teletext functions of your
television. Of course, your television must have
Teletext capability.

TEXT ON Puts the television in the Teletext mode.

TEXT OFF Switches the television back to regular viewing

mode. On some televisions, this may be done
by pressing the TEXT ON key several times.

HOLD/STOP

Stops changing pages.

EXPAND Shows the top half of the Teletext page in

larger letters. By pressing again, you can see
the bottom half of the Teletext page enlarged.
To return to regular Teletext viewing, press the
EXPAND key again, or press the TEXT ON key,
depending on your television.

After pressing the TV key and accessing the
text mode, the bottom row of the Video
Recorder keys marked red, green, yellow
and blue, allow you to access the Fastext
functions of your television. Again, your
television must have fastext capability to
operate these functions. If on your original
remote control these keys are used for
Menu navigation, the ONE FOR ALL Fastext
keys may operate the same.

Custom Keys

The Custom Keys are spare keys which give you
the possibility to customize the ONE FOR ALL
remote using the Learning and Key Magic

®

features (page 30 and 34). These keys can also
be used to program Macros (see page 28).

For your convenience, the ONE FOR ALL 6 comes with an
adhesive overlay to label the “custom keys”. To use the overlay:

1. Remove the label from under the door.

2. Peel off the transparent protective cover from the front.

3. Write down the appropriate functions in the white area
next to the appropriate key you have customized.

4. Peel off the backing sheet.

5. Stick the label back in place.

6 WWW.ONEFORALL.COM

The Keypad

(red)

(blue)

(yellow)

(green)

SP/LP

AUTO

SP/LP

AUTO

Important note: For a more detailed explanation of Teletext and
Fastext, please refer to the manual of your television. Remember,
different televisions control Teletext and Fastext features in
different ways. Not all of the Teletext functions may be available
for your particular model.

A

B
C

D

E

F

G

H

Setting Up Your Television

To set up the ONE FOR ALL 6 for your TV, follow the
instructions below.

Find your 4-digit Television code in the
Set-Up Code section (starting on page

11). Codes are listed by brand name. The
most popular code is listed first. Make

sure your Television is switched on
(not in standby).

Press and release your ONE FOR ALL 6’s

TV key.

Press and hold down the MAGIC key

until the TV key blinks twice (the TV key
will blink once then twice).

Enter your four-digit TV code using the
number keys. The TV ke y will blink twice.

Now, aim the ONE FOR ALL 6 at your
Television and press POWER. If your
Television switches off, your ONE FOR ALL 6
should be ready to run your Television.

Turn your device back on and try all the
remote’s functions to ensure they are
working properly (you may need to press
a number key instead of power). If the
functions do not work properly, repeat
steps 1-5 using another code listed under
your brand.

Write your code in the boxes
provided in the battery compartment
and on page 11 for easy future
reference.

WWW.ONEFORALL.COM 7

ONE FOR ALL

Acura
Admiral
Adyson

Agazi
AGB

Agef

Aiko

0009
0087, 0093, 0363, 041
0217, 0216

0264
0516

0087
0216, 0009, 0037, 0

0037, 0274
0361, 0208, 0371,

1

2
3

5

6

7

Installation

TV

Important notes:

- Some codes are quite similar. If your device does not respond or
is not functioning properly with one of the codes, try another
code listed under your brand.

- If your television does not respond, follow steps 1 through 6 with
each code listed for your brand. If none of the codes listed for
your brand operate your device or if your brand is not listed at
all, try the search method described on page 9.

- Remember, to control your television after the ONE FOR ALL is
set up, you must press the TV key.

4

____

Setting Up Your Other Devices

To set up the ONE FOR ALL 6 for your other devices:

Find the code for your device in the Set-Up
Code section (starting on page 11). Codes are
listed by device type and brand name. The most
popular code is listed first. Make sure your

device is switched on (not in standby).

Press the device key on the ONE FOR ALL 6 for the

device you wish to control. Devices can be found under
the following key:

Device Device Key

Television TV key
Video Recorder VCR key
Satellite Receiver / Cable Converter SAT key
CD Player / Mini Disk Player CD key
Audio Amplifier AUD key

Tuner AUD key
Miscellaneous Audio AUD key
Phonographs AUD key

Digital Versatile Disc (DVD) DVD key
Laser Disc Player DVD key
Audio Cassette Player DVD key
Digital Audio Tape DVD key

Press and hold down the MAGIC key

until the device key blinks twice. (The
device key will blink once and then twice.)

Enter your four-digit device code using
the number keys. The device key will
blink twice.

Now, aim the ONE FOR ALL 6 at your
device and press POWER. If your device
switches off, the ONE FOR ALL 6 is ready
to operate your device.

Write your code in the four boxes
provided in the battery compartment
and on page 11 for easy future reference.

Installation

8 WWW.ONEFORALL.COM

Important notes:

- If your device’s original remote control does not have

a power key, press PLAY instead of POWER when
setting up your device.

- Remember to press the correct device key before

operating your device. Only one device (CD, amplifier,
cassette, etc.) can be assigned to a device key. If your
original remote operates more than one device (for
example, a receiver, CD player and cassette player in one
remote), you need to set up each device separately.

- If your device does not respond, follow steps 1 through 5

with each code listed for your brand. If none of the
codes listed for your brand operate your device, or if
your brand is not listed at all, try the search method
described on page 9.

1

ONE FOR ALL

Fernseher

Admiral 087 093 264

163
Agazi 264
AGB 075
Aiko 216 009
Akai 208 351 037

2

4

5

6

3

____

WWW.ONEFORALL.COM 9

Installation

The Search Method

If your device does not respond to the ONE FOR ALL 6 after
you have tried all the codes listed for your brand, try
searching for your code. The Search Method allows you to
find the code of your device by scanning through all the codes
contained in the memory of the ONE FOR ALL 6. The Search
Method may also work if your brand is not listed at all.

If you cannot get your ONE FOR ALL 6 to control your television.
To search for your TV code:

Switch your television on (not in standby) and aim your
ONE FOR ALL at your TV.

Press the TV key on your ONE FOR ALL 6.

Press and hold down MAGIC until the
ONE FOR ALL 6’s TV key blinks twice (The
TV key will blink once and then twice).

Press 9 9 1. The TV key will blink twice
(The TV key will blink once and then
twice).

Now slowly, alternate between TV and
POWER, over and over, until your
television turns off. You may have to
press these keys many times, so please be
patient. Remember to keep pointing the
ONE FOR ALL 6 at your television when
you press the TV and POWER keys.

As soon as your television turns off,
press MAGIC.

The ONE FOR ALL remote should now be
ready to operate your device. Turn your
device back on and try all the remote’s
functions to ensure they are working
properly. If some of the ONE FOR ALL’s
commands are not operating correctly,
try the search method again. You may be
using the wrong code.

Important notes:

- To search for the code for another device follow the instructions
above only press the appropriate device key (see chart on page

8) instead of TV during steps 2 and 5.

- If the original remote control of your device does not have a
power key, press PLAY instead of POWER during step 5.

- During step 5, you may have to press these keys many times (up
to 150!) so be patient. Remember you must aim the ONE FOR ALL
at your device the entire time you are searching for your code.

1
2
3

4

6

7

5

TV

TV

10 WWW.ONEFORALL.COM

After you have used the Search Method, you can find out
which code the ONE FOR ALL responded to by blinking back
the code. It is useful to know the device code for future
reference. Remember, you can only blink back your code

after the ONE FOR ALL is operating your device.

To blink out your Television code:

Press TV once.

Press and hold MAGIC until the ONE
FOR ALL 6’s TV key blinks twice (The TV
key will blink once and then twice).

Press 9 9 0. The TV key will blink twice.
For the first digit of your four-digit code,

press 1 and count all the red blinks.
If there are no blinks, the digit is "0".

For the second digit, press 2 and count
all the red blinks.
If there are no blinks, the digit is "0".

For the third digit, press 3 and count all
the red blinks.
If there are no blinks, the digit is "0".

For the fourth digit, press 4 and count
all the red blinks. If there are no blinks,
the digit is "0". Now you have your four­digit code.

Make sure you write your Television code in the boxes
provided in the battery compartment and on page 11
for easy future reference.

Installation

6

4

5

1
2

3

7

TV

Important note: To blink back the code for your other devices
press the appropriate device key during step 1.