One for All URC-7040 User Manual

URC-7040 701928
Universal remote
F
UK
I
NL
P
E
2 WWW.ONEFORALL.COM
PICTURE OF THE ONE FOR ALL 4 REMOTE
3
INSTALLING THE BATTERIES
4
FEATURES AND FUNCTIONS
4
INSTALLATION
Setting up your devices
6
The Search Method
7
QUICK CODE REFERENCE
8
CHANGING THE MODE OF A DEVICE KEY
9
RESETTING A DEVICE KEY
9
ADVANCED FEATURES
Colour and Brightness
10
Volume Punch Through
10
Auto Scan
10
Device Sleeptimer
11
ONE FOR ALL Sleeptimer
11
ONE FOR ALL Recall
12
TROUBLE-SHOOTING
12
Customer Service
13
SETUP CODES
Televisions
80
Video Recorders
84
Satellite Receivers
86
Cable Converters
89
DVD Players
89
Congratulations on your purchase of the ONE FOR ALL 4 Universal Remote Control. By choosing the ONE FOR ALL 4 remote you have opted for the User Friendly remote control solution. Made according to the highest quality, the ONE FOR ALL 4 will provide you with long-term satis­faction. Please read these enclosed instructions carefully before putting your ONE FOR ALL 4 to use.
Your ONE FOR ALL 4 Remote Package contains:
• Your ONE FOR ALL 4 Remote Control
• Your ONE FOR ALL 4 Manual
Your Manual is divided into two parts: the set-up instructions and the device codes.
PLEASE DO NOT DISCARD THIS MANUAL AS YOU MAY NEED IT AGAIN IN THE FUTURE!
Your ONE FOR ALL 4 can operate four devices: a Television, a Video Recorder, a DVD Player and a Satellite Receiver or Cable Converter.
Your ONE FOR ALL 4 remote needs to be powered by 2 new “AA/LR6” Alkaline batteries.
UK
Table of Contents
UK
About Your ONE FOR ALL 4
WWW.ONEFORALL.COM 3
9
16
10 14
6 7
11
12 13
15
3
4
2
8
5
1
Installing the Batteries
Your ONE FOR ALL 4 Remote needs 2 new "AA/LR6" Alkaline batteries. 1 Remove the battery cover from the back of your ONE FOR ALL 4 by
pressing down on the arrow on the battery cover and sliding it backwards.
2 Match the batteries to the + and – marks inside the battery case,
then insert the batteries.
3 Slide the battery cover back into place until it clicks. Make sure the
battery cover is secure.
Please refer to the picture of the ONE FOR ALL 4 Remote Control on Page 3.
1 Power Key:
The Power key controls the same function as it did on your original remote.
2 Device Keys:
The TV, VCR, DVD & SAT keys select the home entertainment device you wish to control. For example, pressing the TV key allows the remote to control the functions of your television, etc.
3
4 Mode Indicator LED’s:
During the use of your ONE FOR ALL 4, these LED’s will indicate the mode you’re using. For example when you are controlling your DVD player, the LED on the DVD key will flash red.
4
Number Keys:
The Number keys (0-9, -/--(10), AV (20)) provide the functions just like your original remote, such as the direct access to programme/channel selection. If your original remote uses a 10 key, this function can be found by pressing the -/-- key. If your original remote uses a 20 key, this function can be found by pressing the AV key.
5 Menu Key:
Controls the same function as it did on your original remote control.
6 Magic Key:
The Magic key is used to set-up your ONE FOR ALL 4 Remote Control and to access special functions.
7 Exit Key:
The Exit key will exit the Menu.
8 Menu Navigator:
The Menu Navigator is a miniature joystick. The movement of the navigator up, down, left and right operates the same functions as the up, down, left and right keys of your original remote. By pressing the Menu Navigator, it will operate the same function as the OK/Select key on your original remote control. These keys will allow you to navigate up, down, left and right through the menu of your device.
Please note: the Menu Navigator Joystick is not guaranteed against abusive use such as in on-line gaming now offered by Satellite/Cable Service Providers.
Features and Functions
Important notes:
- In order to avoid having to re-program your ONE FOR ALL 4 after you remove the batteries, you will need to insert new batteries within 5 minutes. Also it is recommended that you do not use rechargeable batteries.
- On the inside of the battery compartment door you will find a label on which to write your Set-Up Codes for future reference. This you will do after setting up your ONE FOR ALL 4 remote for your devices.
WWW.ONEFORALL.COM 4
WWW.ONEFORALL.COM 5
9
Channel Up / Down Control:
The Channel Up / Down keys control the same functions as your original remote control. In DVD mode the Channel Up key operates the (Next Track) function, and the Channel down key operates the (Previous Track) function.
10 Recall Key:
The Recall key operates the same function it did on the original remote control. If your original remote control does not have a Recall function you can set the Recall function up with the ONE FOR ALL Recall (see page 12).
11 Volume Up / Down Control:
These keys operate just as those on your original remote.
12 Mute Key:
The Mute key operates the same function it did on your original remote. It is also used to access the scan feature (see page 10).
13 VCR/DVD Playback keys:
After pressing the VCR mode key, the Playback keys operate the same functions of your Video Recorder Keys. To prevent accidental recording of your video, the RECORD key must be pressed twice. After pressing the DVD mode key, the Playback keys will operate the same functions of your DVD Players.
14 Teletext Functions:
After pressing the TV mode key, the VCR/DVD Playback keys are used to operate the main teletext functions. The symbols above the keys represent the teletext functions they will access.
TEXT ON: Puts your television in the teletext mode. TEXT OFF: Switches the television back to regular viewing mode.
On some televisions, this may be done by pressing the TEXT key several times.
HOLD/STOP: Stops the television changing text pages. EXPAND: Shows the top half of the teletext page in larger letters.
By pressing again, you can see the bottom half of the teletext page enlarged. To return to the regular teletext viewing, press the Expand key again, or press the Text key, depending on your television.
MIX: Shows the teletext and regular television simultaneously. You may also use this key for subtitling. On some televisions this func­tion is accessed by pressing the Text key twice.
15 Wide Screen/Format/16:9 Function:
The 16:9 key allows you to access the wide screen view option of your television (if the function is available on your original remote).
16 Fastext Keys:
The Red, Green, Yellow and Blue keys will allow you to access the fastext functions of your television. Again, your television must have fastext capability to operate these functions. If on your original remote control these keys are used for Menu operation, the ONE FOR ALL 4 Remote will operate the same. These keys will also opera­te the same functions as on your original digital satellite/cable remote.
Important note: For a more detailed explanation of the Teletext and Fastext functions, please refer to the manual of your television. Remember, different televisions control Teletext and Fastext in different ways. Not all Teletext functions may be available for your particular model.
6 WWW.ONEFORALL.COM
Setting Up Your Devices
Example: To set up the ONE FOR ALL 4 for your television:
1 Make sure your device (television) you wish to ope-
rate is switched on (not in standby).
2 Find the code for your device in the Code List (page
80 - 89). The device codes are listed per device type and
brand name. Also the most popular code for each brand is listed first.
3 Press the device mode key (TV) on the ONE FOR ALL 4
remote for the device you wish to set up.
4 Press and hold down MAGIC until the red light blinks
twice (the red light will blink once then twice).
5 Enter your four-digit device code using the number
keys. The red light will blink twice.
6 Now aim the ONE FOR ALL 4 remote at your device
(television) and press POWER. If your device switched
off, the ONE FOR ALL 4 is ready to operate your device.
7 Turn your device (television) back on and try all the remo-
te’s functions to ensure they are working properly. If the functions do not work properly, repeat steps 1-6 using another code listed under your brand.
8 If your device (television) does not respond to the
code entered, follow steps 1-6 with each code listed for your brand. If none of the codes listed for your brand operate your device (television), or if your brand is not listed at all, try the search method described on page 7.
9 Write your devicecode in the applicable four digit
boxes provided in the battery compartment and on page 8 for future reference.
Installation
Before you start, please read these instructions carefully
Important notes:
- Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.
- For VCR setup: If your VCR’s original remote control does not have a POWER key, press PLAY instead of POWER during step 6.
- Remember to press the correct device mode key before operating your device. Only one device can be assigned to each device mode key. If your original remote control operates more than one device, you need to set up each device separately.
ONE FOR A
Adyson
Agazi AGB
Agef
0
0
0
9
0
0
8
7
, 0
0
9
3
, 0
3
6
3
, 0
4
1
0
2
1
7
, 0
2
1
6
0
2
6
4
0
5
1
6
0
0
8
7
0
2
1
6
, 0
0
0
9
, 0
0
3
7
, 0
0
0
3
7
, 0
2
7
4
, 0
2
0
8
, 0
3
7
1
____
6 WWW.ONEFORALL.COM
To set up for a second TV, VCR, DVD or SAT (See Changing the Mode of a Device Key, Page 9).
Devices can be found under the following keys:
Television DVD Player
Video Recorder
Satellite Receiver / Cable Converter
TV
VCR
TV
DVD
SAT
M
A
G
IC
The Search Method
If your device does not respond to the ONE FOR ALL 4 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 4. The search method may also work if your brand is not listed at all.
Example: To search for your television code: 1 Switch your television on (not in standby) and aim your
ONE FOR ALL 4 at your device.
2 Press the TV key on the ONE FOR ALL 4.
3 Press and hold down MAGIC until the ONE FOR ALL 4 red
light blinks twice (the red light will blink once then twice).
4 Press 9 9 1. The red light will blink twice.
5 Now slowly, alternate between TV and POWER, over and
over, until your television turns off. You may have to press these keys many times (up to 200 times!), so please be patient. Remember to keep pointing the ONE FOR ALL 4 at your television when you press these keys.
6 As soon as your television turns off, press MAGIC to store
the code.
The ONE FOR ALL remote should now be ready to operate your TV. Turn your TV back on and try all the remote’s functions to ensure they are wor­king properly. If some of the ONE FOR ALL 4’s commands are not operating correctly, try the search method again. You may be using the wrong code.
Important notes:
- To search for the code for another device follow the instructions above
only press the appropriate device key instead of TV during steps 2 and 5.
- If the original remote control of your VCR does not have a POWER key,
press PLAY instead of POWER during step 5.
WWW.ONEFORALL.COM 7
9
9
1
TV
TV
M
A
G
IC
M
A
G
IC
8 WWW.ONEFORALL.COM
Once you have Set-Up your ONE FOR ALL 4, you can blink back your Set-up Code for future reference.
Example: to blink out your television code: 1 Press the TV key once.
2 Press and hold down MAGIC until the ONE FOR ALL 4 red
light blinks twice (the red light will blink once then twice).
3 Press 9 9 0. The red light will blink twice.
4 For the first digit of your four-digit code, press 1 and
count all the red blinks. If there are no blinks, the digit is "0".
5 For the second digit of your four-digit code, press 2 and
count all the red blinks. If there are no blinks, the digit is "0".
6 For the third digit of your four-digit code, press 3 and
count all the red blinks. If there are no blinks, the digit is "0".
7 For the fourth digit of your four-digit code, press 4 and
count all the red blinks. If there are no blinks, the digit is "0". Now you have your four-digit code.
Quick Code Reference
Make sure you write down the codes for your devices in the boxes below and in the battery compartment for future easy reference.
Device Type Code
1._________________________
2._________________________
3._________________________
4._________________________
Important note: To blink back the code for your other devices, press the appropriate device key during step 1.
9
1
2
3
4
9
0
TV
M
A
G
IC
Loading...
+ 16 hidden pages