Omron E5 K-T DATASHEET

Digital Controller

E5@K-T

The E5@K-T Programmable Type Digital
Controllers Expand the Variety of E5@K
Digital Controllers and are Available in Three
Sizes (1/4, 1/8, and 1/16 DIN).

E5@K-T Series

®

1/4 DIN 1/8 DIN

Digital Controllers

E5AK-T/E5EK-T ........................................... I-125

E5CK-T......................................................... I-127

Contents

E5CK-TE5AK-T/E5EK-T

1/16 DIN

Controller

Temperature

Digital Controller E5@K-T I-123

Compact and Easy-to-use Controllers

■ Programming is as easy as following the steps below.

Program can be set in pattern 0 according to the following procedure.

SP

100

0 50 0.00
1 100 0.20
2 100 0.40
3 50 0.20

Step 1 Step 2 Step 3

50

0.20 0.40 0.20

Time: hours and minutes

Step No. Target value Time

(hours.minutes)

1. Press the Display Key to shift to the display for
the number of steps.

5-no

0 8

Parameter for the number of
steps used

Number of steps
(Default setting: 8)

Pattern No.

Display key

4. Set the target value to “50.”

5p0

0 50

5. Press the Display Key to shift to the display for
the time of step 0.

ti0

0 000

6. Press the Display Key again with the step time
set at 0 minutes, and the target value parameter
for step 1 will be displayed.

Target value

Up key

Time parameter for step 0.

Step time
(Default setting: 0.00)

Pattern No.

Display key

5p1

0 0

2. Press the Down Key and set the number of steps.

5-no

0 4

3. Press the Display Key to shift to the display for
the target value of step 0.

5p0

0 0

Four steps in this case

Down key

Step 0
Parameter of the target value

Target value
(Default setting: 0)

Display key

Display key

7. Press the Up Key to increment to “100.”

5p1

0 100

Up key

In the same manner, set the time for step 1, target
value for step 2, time for step 2, etc.

When the target value and time settings are
complete, press the Display Key.

I-124 Digital Controller E5@K-T