Omnitronic VM-100 S PRO User Manual

USERMANUAL

BEDIENUNGSANLEITUNG

V

M

-

1

0

0SP

R

O

VOCALMICROPHONE

www.omnitronic.com

www.omnitronic.com

00052433.DOC,Version1.0

Universal Dynamic Microphone

Safety Instructions

Setting into Operation

Cleaning

Technical Specifications

The OMNITRONIC is a dynamic microphone with cardioid characteristic
designed for stage and studio applications and is ideally suited for speech and vocals. The
microphone is supplied with amicrophone holder and a practical leatherette bag.

Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.

Connect the microphone via a connection cable to the XLR microphone input of your audio unit (e.g.
mixing console).

Toswitchonthemicrophone, setthesliding switch to the lower position.

For cleaning the microphone only use a dry cloth. Never use chemicals or water.

Type:............................Dynamic

Directivity pattern: ........Cardioid

Frequency range:.........50 - 16,500 Hz

Impedance:..................600

Sensitivity: ...................-64dB

Max. SPL: ..................150 dB

Connector:...................3-pin XLR,bal.

Weight: ........................870g

VM-100 S PRO





W

Screw the holder onto a stand with 1.5 cm thread. For stands with 1 cm thread use

the supplied adapter screw.

Please note: Every information is subject to change without prior notice. 10.07.2009 ©

VOCALMICROPHONE

USERMANUAL

VM-100SPR

O