Omnitronic VHF-101, VHF-102 User Manual

USER’S MANUAL

PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION

VHF WIRELESS MICROPHONE

1. Power Indicator

2. ON/OFF Switch

3. Volume Control

4. RF Indicator

1. Connect one end of supplied 6.35mm to 6.35mm plug audio cable
into AF OUT jack on rear panel of the receiver. Connect the other

end of the audio cable into "MIC IN" or "AUX IN" of amplifier or
mixer.

2. Connect DC plug of supplied AC/DC adapter to DC INPUT jack on

rear panel of the receiver. Connect AC plug of AC/DC adapter to
mains power socket.

3. Press ON/OFF button on front panel to turn on the receiver.

4. Extend antenna fully.

5. Turn on the transmitter. RF indicator on receiver will light.

6. Adjust receiver volume and your amplifier or mixer volume to

suitable level.

RECEIVER

Parts Description

Single
Channel

Front

Rear

Dual
Channel

Front

Rear

Operation

142

3

5

6 7

142

3 3

4

5 67

SPECIFICATIONS

Receiver

Frequency Range: 171.905MHz or 215.200MHz
Frequency Stability: 10PPM
Sensitivity: -92dBm
Frequency Response: 80Hz~12KHz
Audio Output Level: 150mV(RMS)
S/N: >75dB
Distortion: <1%
Power Supply: DC 9V 200mA
Current Consumption: 150mA

Transmitter

Frequency Stability: 10ppm
RF Output: <10mW
Modulation: FM

Max Deviation: ±75KHz
Harmonic Suppression : >45dB
Power Supply: 3V(2xAA batteries)
Current Consumption: 100mA

5. 1/4" unbalanced output jack

6. DC input jack

7. Antenna

7

Frequency Range: 171.905MHz or 215.200MHz

Model:VHF-06HHM
FCC ID: RIVHF-06HHM

Z