Omega Products OMWT-AIN5V User Manual

Wireless Voltage Transmitter
OMWT-AIN5V
$
156
Transmits up to
180 m (600') *
12-Bit Analog
to Digital Conversion
0 to 5 Vdc RangeTransmits Unique ID
and Analog Value
Up to 100 Transmitters
Can Coexist
Compact ABS EnclosureInternal Loop Antenna
The OMWT-AIN5V Wireless Voltage Transmitter is a battery operated 12-bit analog-to-digital converter with a microprocessor controlled 418 MHz. FCC certified radio transmitter. The OMWT-AIN5V has an on board time of day clock that allows it to spend most of the time in a low power quiescent state. At predetermined time intervals the clock will wake up the onboard microprocessor. Unique serial number information is read from a semiconductor digital device and analog data is read from a 12-bit analog to digital converter. This information is combined with a CRC-16 error check and transmitted in a very short data packet that results in a transmitter on time of only 15 milliseconds. This architecture allows the OMWT-AIN5V to consume verylow energy resulting in a battery life of up to 2 years.
The electronics are coated with a conformal rubber material that provides a moisture barrier against condensation. Submersion in water is not recommended. A hole in the top ABS cover permits a special tool to be inserted to activate the service switch. The OMWT-AIN5V is shipped with the transmitter turned off (anytime the device is to be shipped the transmitter should be turned off or must be placed in a shielded container to prevent interference that might cause shipping problems). Start the device by momentarily pushing the service switch (you will feel the button click).
When the service switch is pushed a data transmission occurs immediately and a special mark is introduced in the ID field of the transmitted data packet to indicate which sensor is in service or installation. The service switch is also used to put the device in a quiescent mode (no transmissions and very low power consumption). This is the state the device is in when you receive it from the manufacturer. Push and hold the service switch for 10 seconds or more to enter this powered down state.
Using the OMWT Series Windows software incoming data being received from OMWT Series Wireless Transmitters can be viewed in a real-time or historical time-base chart or numerical view. High/low alarms can also be set for each transmitter signal with either a visual or audible alarm indication on the PC. Data can also be logged to disk at a user-specified rate in a text file format that can be opened up into Microsoft Excel. The OMWT Series Windows software also includes a DDE Server that can interface the data being received from OMWT Series Wireless Transmitters to other Windows software packages.a
inst
Specifications
Voltage Input Range: 0 to 5 Vdc Input Impedance: 100 K A/D Resolution: 12-bit Accuracy: ±0.15% FSR Transmission Frequency: 418 MHz Transmission Rate:
10 to 17 seconds random Transmission Range*: Up to 180 m (600') depending on
environmental conditions
OMWT-SOFT, $100, displays real-time
historical chart or numerical data
Operating Temperature:
-40 to 85°C (-40 to 185°F)
Storage Temperature:
-40 to 85°C (-40 to 185°F) Humidity: 10 to 90% RH non-condensing
Battery: 3.6 V lithium battery (included) Battery Life: 2 years Shelf Life with Battery Installed:
FCC Certified: FCC ID: M5ZANA Dimensions:
38 H x 53 W x 15 mm D (1.5 x 2.1 x 0.6") Weight: 43 g (1.5 oz)
AVAILABLE FOR FAST DELIVERY!
OMWT-AIN5V,
$156, shown
To Order (Specify Model Number)
Model No. Price Description
OMWT-AIN5V $156 Wireless voltage transmitter, 0-5 Vdc input range OMWT-REC232A 222 Wireless receiver and 1.8 m (6') RS-232 cable
OMWT-SOFT 100 OMWT Series Windows software (XP) OM-NOMAD-BATT 12 Replacement 3.6 V lithium battery
Comes complete with operator’s manual. * Depending on environmental conditions.
Ordering Example: OMWT-AIN5V wireless voltage transmitter, OMWT-REC232A wireless receiver and OMWT-SOFT Windows software, $156 + 222 + 100 = $478.
C-1
with DB9F termination
larger than
actual size.
Loading...