Omega Products OME-DB-1825-1 User Manual
D1-1
OME-DN-20, $58, shown smaller than actual size
OME-DN-37, $75, shown smaller than actual size
OME-DN-50, $65, shown smaller than actual size
⻬ Two 20-Pin Flat Connectors
⻬ Digital I/O Access for OME
Boards with 20-Pin Connectors
⻬ 145 x 75 mm (6 x 3")
⻬ Two 37-Pin D-Sub Connectors
(One for Expansion)
⻬ Analog or Digital I/O Access
for OME Boards with 37-Pin,
D-Sub Connectors
⻬ 145 x 75 mm (6 x 3")
⻬ One 50-Pin Flat Connector
⻬ Digital I/O Access for
OME-PIO-D144, OME-PIO-D96,
OME-PIO-D48, (Multiple
OME-DN-50 Boards may be
Required to Access all Channels
on OME-PIO Series Boards)
⻬ 145 x 75 mm (6 x 3")
⻬ 37-Pin D-Sub Connector
⻬ Analog or Digital I/O
Access for OME Boards
with 37-Pin, D-Sub Connectors
⻬ Direct Connect
⻬ 130 x 78 mm (5 x 3")
To Order
(Specify Model Number)
Model Number Price Description
OME-DN-20* $58 20-pin DIN rail mount I/O connector board (two 20-pin headers),
includes two 1 m (3') cables (OME-CA-2010)
OME-DN-37* 75 37-pin D-Sub DIN rail mount I/O connector board (two 37-pin D-Sub connectors,
one for expansion), includes one 1 m (3') cable (OME-CA-3710)
` OME-DN-50* 65 50-pin DIN rail mount I/O connector board (one 50-pin header),
includes one 1.5 m (5') cable (OME-CA-5015)
OME-DB-37 57 Direct connect 37-pin screw terminal boardne 1
ALL MODELS AVAILABLE FOR FAST DELIVERY!
General Purpose Screw Terminal Panels
for the OME Family of Data Acquisition Boards
OME-DN-20
OME-DN-37
OME-DN-50
OME-DB-37
* Add suffix /'N' to order product without DIN Rail mounting
Ordering Example: OME-PCI-1002L 110KS/s low gain, 12-bit analog and digital I/O board, OME-DN-37 terminal panel for analog I/O,
OME-DN-20 terminal panel for digital I/O and OMEGACARESM1 year extended warranty for OME-PCI-1002L (adds 1 year to standard
1 year warranty), $365 + 75 + 58 + 36 = $534.
OME-DB-37, $57, shown smaller than actual size
OME-DB-1825 Screw Terminal Board
The OME-DB-1825 screw terminal board
(Dimensions: 170 L x 114 mm H [6.7 x 4.5"]) has
32 single-ended channels or 16 differential channels.
The OME-DB-1825 connects to the D-sub 37-pin
connector on OME-PCI-1802, OME-PCI-1602,
OME-PCI-1202 or OME-PCI-1002 using the D-sub
37 pin cable (OME-CA-3710 or OME-CA-3720).
Other features of the board include blank pads for
break detection, low-pass filter, current shunt and
voltage attenuation. The OME-DB-1825 screw
terminal board also provides an additional
D-sub 37-pin connector to connect to OME-DB-889D
multiplexer board(s).
Please use suffix "/1" or "/2" with the model number
to specify the D-sub 37-pin cable length
(OME-CA-3710 or OME-CA-3720).
OME-DB-8225 Screw Terminal Board with CJC
The OME-DB-8225 screw terminal board
(Dimensions: 170 L x 114 mm H [6.7 x 4.5"]) has
16 single-ended channels or 8 differential channels.
The OME-DB-8225 connects to the D-sub 37-pin
connector on OME-PCI-1800(H/L), OME-A-826PG,
OME-A-822PG or OME-A-8111 using the D-sub 37
pin cable (OME-CA-3710 or OME-CA-3720). Other
features of the board include blank pads for break
detection, low-pass filter, current shunt and voltage
attenuation, and on-board cold junction circuit in
analog input channel 1 (jumper selectable singleended, differential mode).
Please use suffix "/1" or "/2" with the model
number to specify the D-sub 37-pin cable length
(OME-CA-3710 or OME-CA-3720).
D1-2
Analog Input Screw Terminal Panels
OME-DB-8225/1, $80 or OME-DB-1825/2, $85,
shown smaller than actual size
(shown with DIN-Rail Mounting Kit)
OME-DB-8025 Screw Terminal Board
The OME-DB-8025 screw terminal board
(Dimensions:102 L x 114 mm H [4.0 x 4.5"])
has two 20 pin flat cable connectors and blank
pads for building – (1) an R/C filter circuit, (2)
a voltage divider (for bringing voltage signals higher
than that allowed by the A/D data-acquisition board
(3) a current to voltage converter circuit. Two 2 m (7')
CA-2020 20-pin flat cables are included with the
board. The OME-DB-8025 screw terminal board acts
as an analog I/O screw terminal panel to connect to
OME-A-812PG or OME-PIO-D64, but can be used
for digital I/O with any other OME series boards that
have two 20-pin flat connectors for digital I/O.
OME-DB-1825/1, $80
or OME-DB-1825/2, $85,
shown smaller than actual size
OME-DB-8025, $58, shown
smaller than actual size
Screw Terminal Boards for OME Family
of Data Acquisition Boards
Loading...