VOLTAGE SIGNAL
ISOLATOR
OMDC-VSI
$
179
l Accepts Wide Range of
Input Voltages
l Can be Used for Master/
Follower Operation
l Can be Used with Any DC
Speed Control
The OMDC-VSI (voltage signal isolator)
permits the user to control the output of a
variable speed motor drive from any external
grounded or ungrounded DC input signal.
A single model accepts a wide range of input
voltages (0 to 5 through 0 to 25 Vdc or
0 to 25 through 0 to 250 Vdc). The GAIN
trimpot is used to adjust the output of the
OMDC-VSI to full on when a full speed
signal is applied to its input terminals. The
OMDC-VSI incorporates a feedback circuit,
which virtually eliminates output changes
due to the thermal drift of logic components.
The OMDC-VSI is packaged in an aluminum
chassis mount housing and contains an
on-board power supply for its logic circuit.
An electrical isolation rating of 2500 Vrms is
achieved by the use of an optically isolated
IC package.
The OMDC-VSI can be used with virtually
any motor speed control that has a speed
reference circuit of +5 to +15 Vdc and an
input impedance greater than 47 kΩ. The
output of the OMDC-VSI is a filtered, pulse
OMDC-VSI, $179,
shown actual size.
width modulated signal that is directly
proportional to the input speed signal. The
wide input range allows the OMDC-VSI to
follow signals as low as 0 to 5V logic levels
and up to the 180 Vdc levels present at the
armature leads of a 180 Vdc motor. By
simply connecting the input terminals across
the armature leads of a “master motor”, you
can use the OMDC-VSI for master/follower
operation. The addition of a scaling pot will
provide for proportional follower operation.
To Order (Specify Model Number)
MODEL NO. PRICE DESCRIPTION
OMDC-VSI $179 Voltage signal isolator
Comes complete with operator’s manual.
Ordering Example: OMDC-VSI, voltage signal isolator for use with any DC speed control, $179.
D-1
Note: By adding a resistor across signal
input, OMDC-VSI can function as a current
signal isolator.
SPECIFICATIONS
Supply Voltage: 120/240 Vac, 50/60 Hz
Input Signal Voltage: 0-5 to 0-
0-25 to 0-250 Vdc
Output Signal Voltage: +5 to +15 Vdc
Dimensions:
92 W x 108 L x 42 mm D
(3.63 x 4.25 x 1.65")
Weight: 277.3 g (9.8 oz)
AVAILABLE FOR FAST DELIVERY!
25 Vdc or
One Omega Drive | Stamford, CT 06907 | 1-888-TC-OMEGA (1-888-826-6342) | info@omega.com
www.omega.com
UNITED KINGDOM
www. omega.co.uk
Manchester, England
0800-488-488
UNITED STATES
www.omega.com
1-800-TC-OMEGA
Stamford, CT.
CANADA
www.omega.ca
Laval(Quebec)
1-800-TC-OMEGA
GERMANY
www.omega.de
Deckenpfronn, Germany
0800-8266342
Karviná, Czech Republic
FRANCE
www.omega.fr
Guyancourt, France
088-466-342
CZECH REPUBLIC
www.omegaeng.cz
596-311-899
BENELUX
www.omega.nl
Amstelveen, NL
0800-099-33-44
More than 100,000 Products Available!
Temperature
Calibrators, Connectors, General Test and Measurement
Instruments, Glass Bulb Thermometers, Handheld Instruments
for Temperature Measurement, Ice Point References,
Indicating Labels, Crayons, Cements and Lacquers, Infrared
Temperature Measurement Instruments, Recorders Relative
Humidity Measurement Instruments, RTD Probes, Elements
and Assemblies, Temperature & Process Meters, Timers and
Counters, Temperature and Process Controllers and Power
Switching Devices, Thermistor Elements, Probes and
Assemblies,Thermocouples Thermowells and Head and Well
Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level
Measurement, Magnetic Flowmeters, Mass Flowmeters,
Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel
Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area
Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen
Instrumentation, Environmental Instrumentation, pH
Electrodes and Instruments, Water and Soil Analysis
Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems,
Communication Products and Converters, Data
Acquisition and Analysis Software, Data Loggers
Plug-in Cards, Signal Conditioners, USB, RS232, RS485
and Parallel Port Data Acquisition Systems, Wireless
Transmitters and Receivers
Pressure, Strain and Force
Displacement Transducers, Dynamic Measurement
Force Sensors, Instrumentation for Pressure and Strain
Measurements, Load Cells, Pressure Gauges, Pressure
Reference Section, Pressure Switches, Pressure Transducers,
Proximity Transducers, Regulators,
Strain Gages, Torque Transducers, Valves
Heaters
Band Heaters, Cartridge Heaters, Circulation Heaters,
Comfort Heaters, Controllers, Meters and Switching
Devices, Flexible Heaters, General Test and Measurement
Instruments, Heater Hook-up Wire, Heating Cable
Systems, Immersion Heaters, Process Air and Duct,
Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page