DIGITAL CLOSED LOOP
CONTROLLER
FOR AC OR DC MOTOR DRIVES
OMDC-ASP10, $450.
OMDC-ASP10
$
450
l Adjustable Min/Max and
Accel/Decel
l Adjustable Equivalent to
Proportional and Integral
Gain Setting
l Pulse Input Capacity of
50,000 PPM, 833 Hz
l Programmable Power-On
Initial Settings
l Front Panel Programming with
Parameter Lockout Capability
l Display Programmable for
Engineering Units
l NEMA 4X Rated Faceplate
l Universal Power Supply:
85 to 265 Vac
l Programmable Alarm-Form
C 5 A @ 230 Vac Relay
l Multiple Operational Modes:
Rate, Time, Follower
l Non-Volatile Memory Storage
The OMDC-ASP10 is a compact, economical
control that can be used with conventional
AC, DC, or Brushless DC adjustable speed
drive systems to provide an LED display of
set speeds and precise, digital closed loop
motor speed control. An on-board
microprocessor with non-volatile memory
coupled with sophisticated internal software
makes the OMDC-ASP10 the ultimate in
accuracy and control. Target speeds are
displayed directly in RPM, FPM, GPM,
process time, or any other engineering unit
of measure. Friendly front-panel field
programming permits customizing the
controller to the exact specifications for
each application; maximum and minimum
set speed, decimal points or colon,
operating mode (master or follower), and
the constant which takes into account motor
gear ratios. The OMDC-ASP10 is simple to
operate… just set the desired RPM, rate, or
To Order (Specify Model Number)
MODEL NO. PRICE DESCRIPTION
OMDC-ASP10 $450 Digital closed loop controller for ac/dc speed control
OMDC-PU-40E 114 Shaft mounted pick-up sensor, 20 pulses per revolution
OMDC-PU-2E 114 Shaft mounted pick-up sensor, 1 pulse per revolution
Comes complete with operator’s manual.
Ordering Example: OMDC-ASP10 digital closed loop speed controller, with OMDC-PU-2E
pick-up sensor (1 pulse/revolution), $450 + 114 = $564.
D-x
time in the large 1⁄2" LED display by
depressing the “up-down” pushbuttons,
one digit at a time or fast sweep. The
OMDC-ASP10 settings are exact and
repeatable. It will precisely control speed to a
remarkable ±
The panel mount unit is easy to install into a
standard
directly to a rugged screw type terminal strip
through the easy access rear panel.
1
⁄2 RPM of set speed, long term.
1
⁄8 DIN cutout. All wiring connects
SPECIFICATIONS:
Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: 85 to 265 Vac
Input Frequency: 50 to 60 Hz
Transducer Signal Input: 0-5 to 0-24 Vdc
On-Board Power Supply: 5 Vdc, 50 mA
for external sensors
Cutout: 92 W x 45 mm H (3.62 x 1.77")
Dimensions: 115 W x 58 H x 117 mm D
(4.54 x 2.29 x 4.63")
AVAILABLE FOR FAST DELIVERY!
ADVANCED DIGITAL
CLOSED LOOP
CONTROLLER
FOR AC OR DC MOTOR DRIVES
OMDC-ASP20
$
590
l Compact 1⁄8 DIN Cutout, with
NEMA 4X Faceplate
l Microprocessor Based—True
PID Closed Loop Control
l Field Programmable
Operating Parameters
l RS232/422/485 Serial
Interface–Remote Speed Setting
and Continuous Output of Actual
Shaft Speed, Set All Field
Programmable Parameters
l Displays Actual or Desired
Speed Directly in RPM, FPM,
Process Time, or Other
Engineering Units
1
l ±
⁄2 RPM of Set Speed Accuracy
l Master/Follower Operation
l Non-Volatile Memory Retains
Speed Setting and All Field
Programmable Parameters
l Internal A/D Interface—Use a
Potentiometer, 4 to 20 mA or
0 to 5 Vdc Signal in Lieu of
Digital Pick-Up Signal or to
Control Target Speed, Current
Program or Frequency
The OMDC-ASP20 digital control unit, with an
advanced 16-bit microprocessor, is designed
for use with conventional AC frequency or DC
drives, any horsepower, to provide: LED
display of set or actual speed, closed loop
motor speed control, Master or Follower
modes, and Serial communications. This
control features a true P-I-D algorithm, for
extremely responsive and precise control over
a wide variety of desired speeds and
applications. Set or actual speed is displayed
directly in RPM, FPM, Process Time, or other
engineering units. Field programming permits
customizing specific operating parameters.
The integrated RS485/RS422/RS232 serial
interface port is perfect for monitoring or
control using almost any computer or
Generator Output
l Inhibit Circuit Permits Start and
Stop Without Breaking AC Lines;
Pre-Selecting Speed, or
Simultaneous Start-Up of
Multiple Control Units
l Exclusive User Assignable
Output—to Drive Relays
or Alarms
l Independent Frequency
Generator
To Order (Specify Model Number)
MODEL NO. PRICE DESCRIPTION
OMDC-ASP20 $590 Advanced digital closed loop controller for ac/dc
OMDC-PU-40E 114 Shaft mounted pick-up sensor, 20 pulses per revolution
OMDC-PU-2E 114 Shaft mounted pick-up sensor, 1 pulse per revolution
Comes complete with operator’s manual.
Ordering Example: OMDC-ASP20 advanced digital closed loop speed controller, with
OMDC-PU-40E pick-up sensor (20 pulses/revolution), $590 + 114 = $704.
OMDC-ASP20, $590.
process controller. Units can even be
attached in a Local Area Network, and can
then be controlled and programmed either
individually or all at once. Multiple programs
allow the user to choose between a “menu”
of up to six programmed configurations.
SPECIFICATIONS:
Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: 85 to 265 Vac
Input Frequency: 50 to 60 Hz
Transducer Signal Input: 0-5 to 0-24 Vdc
On-Board Power Supply: 5 Vdc, 50 mA
for external sensors
Cutout: 92 W x 45 mm H (3.62 x 1.77")
Dimensions: 115 W x 58 H x 117 mm D
(4.54 x 2.29 x 4.63")
AVAILABLE FOR FAST DELIVERY!
speed control
D-y
One Omega Drive | Stamford, CT 06907 | 1-888-TC-OMEGA (1-888-826-6342) | info@omega.com
EPG05
www.omega.com
UNITED KINGDOM
www. omega.co.uk
Manchester, England
0800-488-488
UNITED STATES
www.omega.com
1-800-TC-OMEGA
Stamford, CT.
CANADA
www.omega.ca
Laval(Quebec)
1-800-TC-OMEGA
GERMANY
www.omega.de
Deckenpfronn, Germany
0800-8266342
Karviná, Czech Republic
FRANCE
www.omega.fr
Guyancourt, France
088-466-342
CZECH REPUBLIC
www.omegaeng.cz
596-311-899
BENELUX
www.omega.nl
Amstelveen, NL
0800-099-33-44
More than 100,000 Products Available!
Temperature
Calibrators, Connectors, General Test and Measurement
Instruments, Glass Bulb Thermometers, Handheld Instruments
for Temperature Measurement, Ice Point References,
Indicating Labels, Crayons, Cements and Lacquers, Infrared
Temperature Measurement Instruments, Recorders Relative
Humidity Measurement Instruments, RTD Probes, Elements
and Assemblies, Temperature & Process Meters, Timers and
Counters, Temperature and Process Controllers and Power
Switching Devices, Thermistor Elements, Probes and
Assemblies,Thermocouples Thermowells and Head and Well
Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level
Measurement, Magnetic Flowmeters, Mass Flowmeters,
Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel
Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area
Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen
Instrumentation, Environmental Instrumentation, pH
Electrodes and Instruments, Water and Soil Analysis
Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems,
Communication Products and Converters, Data
Acquisition and Analysis Software, Data Loggers
Plug-in Cards, Signal Conditioners, USB, RS232, RS485
and Parallel Port Data Acquisition Systems, Wireless
Transmitters and Receivers
Pressure, Strain and Force
Displacement Transducers, Dynamic Measurement
Force Sensors, Instrumentation for Pressure and Strain
Measurements, Load Cells, Pressure Gauges, Pressure
Reference Section, Pressure Switches, Pressure Transducers,
Proximity Transducers, Regulators,
Strain Gages, Torque Transducers, Valves
Heaters
Band Heaters, Cartridge Heaters, Circulation Heaters,
Comfort Heaters, Controllers, Meters and Switching
Devices, Flexible Heaters, General Test and Measurement
Instruments, Heater Hook-up Wire, Heating Cable
Systems, Immersion Heaters, Process Air and Duct,
Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page
Loading...