Omega Products OMBV7-WG35-10 User Manual

Page 1
L-44
Omega’s new OMTBV7-W terminals are designed to meet the three most important criteria when selecting a terminal block line – ease of wiring, secure connections and durability. The line is also comprehensive, offering a wide array of terminal types for most circuits and functions, from control to low level power.
The Size You Need
OMTBV7-W feed-through terminals come in ten sizes and are rated to 600VAC (800V­IEC). They accommodate a full range of wire sizes from 30AWG to 3/0 AWG (0.5mm2 to 70mm2 wire cross section). Many “specialty” feed-through terminals are also available that provide multiple terminations or increase the density of connections. This reduces panel space and saves money.
Comprehensive Selection of Special Terminals
Aside from the broad selection of standard feed-through terminals, many special terminals are also part of the new OMTBV7-W line, including:
pad and serrated current bar. This corrosion­resistant clamping mechanism provides excellent performance in the most demanding industrial conditions.
Superior Insulation and Protection Features
All metal parts are recessed, providing a touch-safe, dead front design for optimum safety. Terminal bodies are manufactured from Polyamide 6.6, known for its excellent thermal stability, impact resistance and resistance to electrical creepage. The insulating cases are rated up to 90°C (195°) for continuous operation. They also stay elastic down to -40°C (-40°F) without fracturing.
International Approvals
Omega’s new OMTBV7-W terminal block line is UL recognized and CSA Certified. Many terminals have also been certified for use in hazardous locations. The line also carries the CE Mark for use in most international markets.
INTRODUCTION TO DIN RAIL TERMINAL BLOCKS
Two level terminalsHigh Current terminalsGround terminalsDual connection terminalsDiode and resistor terminalsPlug-in style terminalsVarious isolating terminalsFuse terminalsSensor terminalsThermocouple terminalsProximity switch terminals
Even the most varied circuit requirements can be supported by the broad selection offered with this line.
Super Reliable Connections
The most important aspect of a terminal block is to join wires in a reliable connection. With OMTBV7-W terminals, a cone shaped guide allows easy insertion of the wire into a nickel plated barrel. As tightening torque is applied to strong stainless steel screws, the wire is secured between a recessed contact
Stainless steel screws and serrated current bars provide a strong, corrosion-resistant grip.
Cone shaped guide allows easy wire insertion.
Visit
omegamation.com
for our complete
line of terminal
blocks
Page 2
L-47a
GROUNDING BLOCKS
MOST POPULAR MODELS LISTED!
To Order
(Specify Model Number)
Grounding Blocks
TERMINAL MODEL NO. PRICE MODEL NO. PRICE
Green/Yellow OMTBV7-WG4-50 $279 OMTBV7-WG6-50 $295 Pkg of 50
ACCESSORIES
End Barrier OMTBV7-EB3-Y-50 $38 OMTBV7-EB10-Y-50 $47 Pkg of 50 or 10
End Anchors
-50 (pkg of 50)
-10 (pkg of 10) Screw Type—Normal Duty OMTBV7-EA35-50 55 OMTBV7-EA35-50 55 Screw Type—Heavy Duty OMTBV7-EAH35-10 44 OMTBV7-EAH35-10 44
Blank Marking Tags, 6 x 12 mm (0.2 x 0.47"), card of 100 OMTBV7-SM6X12 8 OMTBV7-SM6X12 8
Pre-Printed Marking, Tabs, Single Digit (0 to 9), stick of 10 OMTBV7-MP 3 OMTBV7-MP 3
SPECIFICATIONS
Approvals Maximum Current Grounding Grounding Wire Range #22 to #22 to #22 to #22 to
(Rated Cross Section) #14 AWG #12 AWG 4 mm
2
#10 AWG #10 AWG 6 mm
2
Wire Strip Length 11 mm (0.43") 12 mm (0.47") Recommended
Tightening Torque 0.7 Nm (5.6 to 6.8 lb/in.) 0.7 Nm (5.6 to 6.8 lb/in.) Density 166/m (50 pcs./ft) 142/m (43 pcs./ft) Insulation Temperature Range -40 to 90°C (-40 to 195°F) -40 to 90°C (-40 to 195°F)
6 mm
2
48 mm (1.89")
10 mm
2
41 mm (1.61")
48 mm
(1.89")
41 mm (1.61")
Ordering Examples: OMTBV7-WG4-50, grounding block, package of 50, and OMTBV7-EAH35-10, end anchors, package of 10, $279 + 44 = $323.
OMTBV7-WG6-50, grounding block for #22-10 AWG, package of 50, $295.
OMTBV7-WG6-50
OMTBV7-WG10S-10
4 mm
2
35 mm
(1.38")
48 mm (1.89")
OMTBV7-WG4-50
All models shown larger
than actual size.
Page 3
MOST POPULAR MODELS LISTED!
To Order
(Specify Model Number)
Grounding Blocks
L-47b
16 mm
2
55 mm (2.17")
55 mm (2.17")
35 mm
2
60 mm (2.36")
71 mm
(2.8")
Ordering Examples: OMTBV7-WG16-10, grounding block, package of 10 and OMTBV7-EAH35-10, end anchors, package of 10, $100 + 44 = $144.
OMTBV7-WG35-10, grounding block for #6-1/0 AWG, package of 10, $132.
OMTBV7-WG16-10
OMTBV7-WG35-10
TERMINAL MODEL NO. PRICE MODEL NO. PRICE MODEL NO. PRICE
Green/Yellow OMTBV7-WG10S-10 $72.00 OMTBV7-WG16-10 $100.00 OMBV7-WG35-10 $132.00 Pkg of 10
ACCESSORIES
End Barrier OMTBV7-EB10-Y-50 $47.00 Not Required Not Required Pkg of 50 or 10
End Anchors
-50 (pkg of 50)
-10 (pkg of 10) Screw Type— Normal Duty OMTBV7-EA35-50 55.00 OMTBV7-EA35-50 55.00 OMTBV7-EA35-50 55.00 Screw Type— Heavy Duty OMTBV7-EAH35-10 44.00 OMTBV7-EAH35-10 44.00 OMTBV7-EAH35-10 44.00
DIN Rail, 35 x 7.5 mm x 2 m (1.4 x 0.3" x 6.5') slotted XBANS3575P 9.00 XBANS3575P 9.00 XBANS3575P 9.00
DIN Rail, 35 x 7.5 mm x 2 m (1.4 x 0.3" x 6.5') solid XBANS3575U 9.30 XBANS3575U 9.30 XBANS3575U 9.30
DIN Rail, 35 x 15 mm x 2 m (1.4 x 0.6" x 6.5') slotted XBANS3515P 17.00 XBANS3515P 17.00 XBANS3515P 17.00
DIN Rail, 35 x 15 mm x 2 m (1.4 x 0.6" x 6.5') solid XBANS3515U 17.00 XBANS3515U 17.00 XBANS3515U 17.00
Blank Marking Tags, 6 x 12 mm (0.2 x 0.47"), card of 100 OMTBV7-SM6X12 8.00 OMTBV7-SM6X12 8.00
Blank Marking Tags, 8 x 12 mm (0.3 x 0.5"), card of 100 OMTBV7-SM8X12 8.00 ——
Pre-Printed Marking Tabs, Single Digit (0 to 9), stick of 10 OMTBV7-MP 3.00 OMTBV7-MP 3.00
SPECIFICATIONS
Approvals Maximum Current Grounding Grounding Grounding Wire Range #22 to #22 to #10 to #10 to #6 to #6 to
(Rated Cross Section) #8 AWG #8 AWG 10 mm2#4 AWG #4AWG 16 mm2#1/0 AWG #1/0 AWG 35 mm
2
Wire Strip Length 11 mm (0.43") 18 mm (0.70") 21 mm (0.83") Recommended
Tightening Torque 0.8 Nm (7.1 to 6.8 lb-in.) 2.5 Nm (22.1lb-in.) 5.0 Nm (44.3 lb-in.) Density 125/m (38 pcs./ft) 76/m (23 pcs./ft) 55/m (16 pcs./ft) Insulation -40 to 90°C (-40 to 195°F) -40 to 90°C (-40 to 195°F) -40 to 90°C (-40 to 195°F)
Temperature Range
All models shown
smaller than actual size.
Page 4
One Omega Drive | Stamford, CT 06907 | 1-888-TC-OMEGA (1-888-826-6342) | info@omega.com
EPG05
www.omega.com
UNITED KINGDOM
www. omega.co.uk
Manchester, England
0800-488-488
UNITED STATES
www.omega.com
1-800-TC-OMEGA
Stamford, CT.
CANADA
www.omega.ca
Laval(Quebec)
1-800-TC-OMEGA
GERMANY
www.omega.de
Deckenpfronn, Germany
0800-8266342
Karviná, Czech Republic
FRANCE
www.omega.fr
Guyancourt, France
088-466-342
CZECH REPUBLIC
www.omegaeng.cz
596-311-899
BENELUX
www.omega.nl
Amstelveen, NL 0800-099-33-44
More than 100,000 Products Available!
Temperature
Calibrators, Connectors, General Test and Measurement Instruments, Glass Bulb Thermometers, Handheld Instruments for Temperature Measurement, Ice Point References, Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders Relative Humidity Measurement Instruments, RTD Probes, Elements and Assemblies, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching Devices, Thermistor Elements, Probes and Assemblies,Thermocouples Thermowells and Head and Well Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level Measurement, Magnetic Flowmeters, Mass Flowmeters, Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen Instrumentation, Environmental Instrumentation, pH Electrodes and Instruments, Water and Soil Analysis Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems, Communication Products and Converters, Data Acquisition and Analysis Software, Data Loggers Plug-in Cards, Signal Conditioners, USB, RS232, RS485 and Parallel Port Data Acquisition Systems, Wireless Transmitters and Receivers
Pressure, Strain and Force
Displacement Transducers, Dynamic Measurement Force Sensors, Instrumentation for Pressure and Strain Measurements, Load Cells, Pressure Gauges, Pressure Reference Section, Pressure Switches, Pressure Transducers, Proximity Transducers, Regulators, Strain Gages, Torque Transducers, Valves
Heaters
Band Heaters, Cartridge Heaters, Circulation Heaters, Comfort Heaters, Controllers, Meters and Switching Devices, Flexible Heaters, General Test and Measurement Instruments, Heater Hook-up Wire, Heating Cable Systems, Immersion Heaters, Process Air and Duct, Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page
Loading...