Omega Products FTB4800 Installation Manual

omega.com
e-mail: info@omega.com
For latest product manuals:
omegamanual.info
FTB4800 SERIES
S tainless Single- J et Mete r
Shop online at
Servicing North America:
U.S.A.: One Omega Drive, P.O. Box 4047
ISO 9001 Certified
Stamford, CT 06907-0047 TEL: (203) 359-1660 FAX: (203) 359-7700 e-mail: info@omega.com
Canada: 976 Bergar
Laval (Quebec) H7L 5A1, Canada TEL: (514) 856-6928 FAX: (514) 856-6886 e-mail: info@omega.ca
For immediate technical or application assistance:
U.S.A. and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA
®
Customer Service: 1-800-622-2378 / 1-800-622-BEST
®
Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN
®
TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA
Mexico: En Espan˜ol: (001) 203-359-7803 e-mail: espanol@omega.com
FAX: (001) 203-359-7807 info@omega.com.mx
Servicing Europe:
Benelux: Postbus 8034, 1180 LA Amstelveen, The Netherlands
TEL: +31 (0)20 3472121 FAX: +31 (0)20 6434643 Toll Free in Benelux: 0800 0993344 e-mail: sales@omegaeng.nl
Czech Republic: Frystatska 184, 733 01 Karviná, Czech Republic
TEL: +420 (0)59 6311899 FAX: +420 (0)59 6311114 Toll Free: 0800-1-66342 e-mail: info@omegashop.cz
France: 11, rue Jacques Cartier, 78280 Guyancourt, France
TEL: +33 (0)1 61 37 2900 FAX: +33 (0)1 30 57 5427 Toll Free in France: 0800 466 342 e-mail: sales@omega.fr
Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
TEL: +49 (0)7056 9398-0 FAX: +49 (0)7056 9398-29 Toll Free in Germany: 0800 639 7678 e-mail: info@omega.de
United Kingdom: One Omega Drive, River Bend Technology Centre
ISO 9002 Certified
Northbank, Irlam, Manchester M44 5BD United Kingdom TEL: +44 (0)161 777 6611 FAX: +44 (0)161 777 6622 Toll Free in United Kingdom: 0800-488-488 e-mail: sales@omega.co.uk
OMEGAnet®Online Service Internet e-mail
omega.com i n f o @ o m e g a . c o m
It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.
The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice. WARNING: These products are not designed for use in, and should not be used for, human applications.
GENERAL INFORMATION
Ó°ää»
i>iÊ */ÊÌÀi>` ÃâiÊÛ>Àià ÜÌÊ`iÊÆ ÃiiÊV>ÀÌÊLiÜ
ΰÓÈ»
£nÊÌ
-iÃÀ >Li
£°xä»
Ó°ää»
*/Ê/Ài>`Ê-âi
£ÉÓÊV
£ÊV
ÎÉ{ÊV
x°ää
{°£ä
{°£ä
`iÊ
äxä
£ää
äÇx
°Çx
°nÓ
°nÓ
£°ää
£°ä{
£°ä{
The FTB4800 series stainless single-jet meter provides accu-
rate, wide range ow metering in an extremely rugged stainless steel package. Single-jet simplicity combined with high quality jewel bearings results in long life and relatively high tolerance for problem uids. Typical applications are chemical batching, proportional chemical injection, fertilizer injection, proportion­ing of spray chemicals, and general ow rate monitoring.
SPECIFICATIONS*
Connection Ports
Sensor Cable
Materials Body Rotor Shaft Bearings O-Ring Cover
Maximum Temperature
Maximum Pressure
Accuracy
1/2”, 3/4”, and 1” female NPT thread (SAE optional)
18 feet standard (Maximum cable run 2000 ft.)
316 stainless steel PVDF
Nickel-bonded tungsten carbide (ceramic optional) Ruby ring and ball PFA-coated FKM (EPDM or Perouroelastomer optional)
316 stainless steel
200˚ F (93˚ C)
500 psi (35 bar)
+/- 1% of full scale
The sensor is easily replaced from outside the meter and is com­patible with most Omega indicators and transmitters, as well as
most controls and PLC’s that accept DC inputs. The standard
rotor is PVDF and the shaft is a nickel-bonded tungsten carbide. The optional ceramic shaft increases resistance to some concentrated chemicals. The standard O-ring is PFA-coated FKM, with EPDM optional for compatibility with a variety of
chemicals.
FLOW RANGE
Model
-050
-075
-100
GPM = Gallons/Minute LPM = Liters/Minute
K-Factor
(pulses/gal)
535
390
220
Flow
0.1-10 GPM
(.38-38 LPM)
0.2-15 GPM
(.75-57 LPM)
0.5-25 GPM
(1.9-95 LPM)
Power
Outputs
Regulatory
*Specifications subject to change
DIMENSIONS
5-24 Vdc, 2 mA min
Current sinking pulse, 6 - 24 Vdc
Mark (Standard Power Only)
Page 2
Loading...
+ 4 hidden pages