Omega Products FTB-1400-90CABLE User Manual

FLOW MONITOR DIGITAL DISPLAYS

FOR FTB-1400 SERIES TURBINES

FTB-1400-D

Starts at

$

345

⻬ Displays Rate

and/or Total

⻬ Large 8 Digit by 3⁄4"

Display for
Easy Viewing

⻬ One “D” 1.5V Alkaline

Battery (Included) for
Up to 31⁄2 Years
of Service

⻬ User Friendly Front

Panel Programming

⻬ NEMA 4X (IP66)

Enclosure

⻬ Meter, Remote,

or Swivel Mount
Configurations

F

The FTB-1400-D display is a
technologically advanced flow
monitor designed to be
comprehensive, user-friendly,
flexible and cost efficient. This
microprocessor-based display can
easily be configured in the field.

The user may choose between the
standard model which is programmed
in seven simple steps and the
advanced model which provides
additional programming options.

The FTB-1400-D display is offered in
three mounting configurations: meter,
remote and swivel display allowing
for flexible installation. The display,
when paired with a rugged, reliable
OMEGA®turbine flowmeter, will
provide dependable and accurate
flow information for many years to
come. The display may also be used
with almost any flow sensor that
outputs a low-amplitude AC signal.

FTB-1400-RD, $365, shown
smaller than actual size.

The FTB-1400-D flow monitor
accepts a low-level frequency input,
such as the input from a OMEGA
turbine meter, to calculate flow rate
and total. These calculations are
then displayed in user selected unit
of measurement. They can be
easily configured in the field.

The FTB-1400-D is battery-powered
and utilizes one “D” size, 1.5V
alkaline battery (included) that
provides up to 3

1

⁄2 years of service.

F-1

The displays are equipped with a
large 8 digit by 3⁄4" numerical LCD
making extended range viewing
practical. The second 8 character
by 3⁄8" alphanumeric display provides
for selectable units viewing in run
mode and prompts variables in
programming mode. Additionally,
the user can choose between
displaying rate, total or alternating
between both rate and total.

SPECIFICATIONS

LCD Display: Rate and total, fixed or toggle modes of

operation 8 digit, 18 mm (0.7") numeric (top line) 8 character,
9 mm (0.35") alphanumeric (bottom line); resettable

Power: 1 “D” size 1.5 Vdc alkaline battery (included) less than
1 milliwatt (~3.5 years on 1 “D” battery)

Pulse Output Signal: One pulse for each increment of the
least significant digit of totalizer. Pulse type opto-isolated
open collector transistor

Max Voltage: 30 Vdc
Pulse Width (ON State): 20 ms/max pulse rate 20 Hz
Current (ON State): 0.9V drop at 5.0 mA or 0.7V drop

at 0.1 mA

Inputs: Magnetic pickup
Frequency Range: 1 to 3500 Hz
Trigger Sensitivity: 30 mV p-p over voltage protected 30 Vdc
Frequency Measurement Accuracy: ±0.1%
Operating Temperature: -30 to 70°C (-22 to 158°F)
Humidity: 0 to 90% non-condensing
Enclosure Rating: NEMA 4X (IP66)
Units of Measure (Rate/Total): GPM/gallons, LPM/liters,

M3PD/cubic meters, BPD/barrels, M3PH/cubic meters

Additional Specifications (-A) Model

Thirteen Selectable Units of Measure: Gallons, oil barrels,

liters,cubic meters, Mgal, MCF, MMCF, cubic ft, M liters,
acre ft, liquid barrels, lbs, or kgs

Three Time Units for Rate Measurement: Day, hour,
minute, or second ten point linearization programming

Meter Mount: Monitor is assembled to the flowmeter, creating
a compact flow measurement system

Meter Mount (Only for use with FTB-1400 series turbines)

Dimensions: mm (in)

Swivel Mount (Only for use with FTB-1400 series turbines)

Remote Mount

MOST POPULAR MODELS HIGHLIGHTED!

To Order (Specify Model Number)

Model No. Price Description
FTB-1400-MD $345 Meter mounted display, standard programming
FTB-1400-SD 410 Swivel mounted display, standard programming
FTB-1400-RD 365 Remote mounted display, standard programming
FTB-1400-MD-A 440 Meter mounted display with advanced programming
FTB-1400-SD-A 495 Swivel mounted display with advanced programming
FTB-1400-RD-A 455 Remote mounted display with advanced programming
FTB-1400-CABLE 69 3 m (10') cable for remote mount display with straight connector
FTB-1400-90CABLE 81 3 m (10') cable for remote mount display with 90º connector

Comes complete with “D” 1.5V alkaline battery and operator’s manual.

Ordering Examples: FTB-1413,
FTB-1424, 1 NPT stainless turbine, FTB-1400-RD, battery powered remote display, and FTB-1400-CABLE, 3 m (10') cable assembly with

2-pin connector, $670 + 365 + 69 = $1104.

1

⁄2 NPT stainless turbine and FTB-1400-MD, battery powered display for meter mount, $660 + 345 = $1005.

F-2

F