Omega Products DPG409S15-001CG User Manual

SANITARY/CLEAN-IN-PLACE
DIGITAL PRESSURE GAUGE

VERY HIGH ACCURACY

Gauge, Absolute, Compound Gauge,
Vacuum and Barometric Models

0-10 inH20 to 0-600 psi
(0-25 mb to 0-41 bar)

DPG409S Series

®

PRESSURE

GAUGES

G

Standard

U Easy to Read 25 mm (1")

Backlit LCD Display

U High 0.08%

Accuracy Typical

U Hi and Lo Alarms

Standard

U MIN/MAX/AVG Reading
U User Selectable Analog

Output 0 to 5 Vdc,
0 to 10 Vdc or 4 to 20 mA

U Data Logging and

Charting Software
Included

U Wireless Transmitter

Option Sends Reading
to a Remote Location

U Tested to Industrial

CE Standards

U Battery Powered with

Long Battery Life

U Analog Output Standard
U Wireless Transmitter

Optional

Fast Delivery –

Typically Stock to

1-Week!

OMEGA’s DPG409S Sanitary/
CIP digital pressure gauges
incorporate a rugged 316 SS
enclosure designed for washdown
and marine applications with a
precision 0.08% accuracy pressure
transducer with 316L SS wetted
parts and body. The result is an
extremely durable digital pressure
gauge designed to survive harsh
industrial environments. The large
25 mm (1") display is easy to read
at a distance up to 11 m (35').
Models are available in Gauge,
Compound Gauge, Absolute,
Vacuum and Barometric pressure
ranges. Standard features include
a highly stable silicon sensor,
selectable MIN/MAX and AVG
readings, Hi and LO alarms and an

NEMA 4X case.

DPG409S15-500G,
shown smaller than
actual size.

externally powered user selectable
analog output. An optional wireless
transmitter feature with software
allows the signal to be transmitted
to a remote location such as a PC
for charting and data logging. Power
is from an internal long life battery
(included) or an externally supplied
dc voltage source. Each unit is
supplied with configuration software
that allows the user to connect to a
PC via a standard USB connection
(cable included) and select a
variety of user configurable features
including update rate, units,
and backlight.

G-1

SPECIFICATIONS

RoHS Compliant
CE Compliant: Meets industrial

emissions and immunity standard
IEC61326 for industrial locations

Accuracy: ±0.08% Best Straight
Line Typ. (Linearity, Hysteresis and
Repeatability combined)

Calibration: 5-Pt NIST traceable
Calibration with zero and span values,
Calibrated in horizontal direction
(Compound Gage models calibrated in
positive direction only).

Zero Balance: ±0.5% FS typical ±1%
max (For ranges ≤2.5 psi ±1% Typ.
±2% max)

Span Setting: ±0.5% FS typical ±1%
max (For ranges ≤2.5 psi ±1% Typ.
±2% max)

Storage/Operating Temperature
Range: -15 to 115°C (5 to 240°F)

Compensated Temperature Range:
Ranges ≤5 psi: 4.4 to 60°C

(40 to 140°F)
Ranges >5 psi: -4 to 85°C
(25 to 150°F)

Thermal Effect (Over
Compensated Range):

Zero and Span shift over
Compensated Range

Ranges ≤25 psi: Zero: 1.00%
Span: 0.70%
Range = 5 psi: Zero: 0.80%
Span: 0.50%
Ranges > 5psi: Zero: 0.50%
Span: 0.50%

26B & 26HB Barometric Range:
Zero: 0.90% Span: 0.50%

Minimum Isolation Between Case and
Output Terminations:

100M Ω @ 50 Vdc
Analog Output: User selectable 0 to

5 Vdc, 0 to 10 Vdc of 4 to 20 mA
(external 24 Vdc power required)

Note: Compound gage ranges have a
unidirectional analog output equal to their full
span; i.e. -15 to +15 psi = 0 to 10 Vdc.

Analog Output Cable: 2.7 m (8.9') with
ferrite core included

Analog Output Accuracy: 0.08%
typical (0.15% max in RF field @
10V/m)

Pressure Cycles: 250,000, minimum
Long Term Stability (1-Year): ±0.1%

FS Typ.
Fill Fluid: NEOBEE M5 Food Grade

Approved to 3A Sanitary Specification
74-03

Environmental Protection: NEMA
4X (IP65) depending upon electrical
termination

Pressure Rating: 1

1

⁄2 and 2" Tri-GripTM
Fitting (compatible with Tri-Clamp®):
600 psi using suitable clamp (600 psi on
11⁄2" Tri-Clamp® only)

Over Pressure: 4 x rated pressure to
maximum rated flange pressure

Secondary Containment: 6 x rated
pressure to a maximum of 2000 psi (not
in clamp)

Display: 4-digit LCD with user
selectable backlighting, (9999 count)
25 mm (1") character height

Computer Interface: UBS connection
for set-up, cable included

Sample/Display Rate: User selectable
from 0.25 to 10 sec. (preset to 1/sec)

Power: One 3.6V lithium 8.4 Ah
capacity (C cell) Included (Two included
with Wireless Option)

Battery Life (Typical): Up to 4-years
Enclosure Material: 316 Stainless

Steel and ABS center gasket

Enclosure Finish: Electropolished
Enclosure Environmental Rating:

Weatherproof, NEMA 4X (IP65)
Connection Location: Lower (head

rotates to position display)

Front Panel Functions

Backlight: Manually turns backlight

on/off

Min/Max: Recalls min/max values
Zero/Clear: Zeros display or clears

min/max

Software Settings (via USB)

Update Rate: 4 options, 10, 5, 2, 1

times per second
Units: psi, inHg, inH

hPa, units must be specified

O, bar, mbar,

2

at time of order
Lock: Allows the lock-out of front panel

functions
Alarms: User selectable “High” and

“Low” alarm limits. (Open Collector)
Analog Output: User Selectable

0 to 5 Vdc, 0 to 10 Vdc, or 4 to 20 mA
(requires external 24 Vdc power)

Backlight: On/Off, 10 sec, 30 sec,
1 min, 5 min

Wireless Transmitter (optional):
Channel Number, Transmission rate,
alarms, sensor offset, chart recording,
data logging

Calibrate: Zero and Span
Overrange Indication: “_ _ _ _”

Wireless Option Sepcifications:

Transmit Sample Rate: User

programmable from 1 sample/2 min to
1 sample/2 sec

Radio Frequency (RF) Transceiver
Carrier: ISM 2.4 GHz

RF Output: 10 dBm (10 mW)
Range of RF Link:
Outdoors (Line of Sight):

Up to 120 m (400')
Indoors/Urban: Up to 40 m (130')

Included Software: Requires Windows
7 (32 bit); XP, Vista

Internal Battery: Two 3.6V lithium

8.4 Ah capacity (C-cell) included
Data Transmission to Host: Pressure

reading, ambient temperature reading,
RF transmit strength and battery level

Dimensions:
Display: 115 D x 89 W x 74 mm H

(4.5 x 3.5 x 2.9")
Sensor: 72 to 89 mm L (2.8 to 3.5")

below display
Weight: 900 g (2 lb) Typical depending

upon configuration

DPG409S15-500G, shown

smaller than actual size.

®

G-2