![](/html/97/976c/976c97f04eb5c9ef07565493538fab4bc363ed6bb84bd9f3ea7b2605fd3d62ec/bg1.png)
PRESSURE CALIBRATION KIT
WITH 0.05% DIGITAL PRESSURE GAUGE
AND HAND PUMP
DPG4000-KIT
Starts at
$
1465
Standard
⻬ RS232 Digital
Communications Standard
⻬ Pump and Hose Included
⻬ Very High Accuracy:
±0.05% FS
⻬ Temperature Compensated:
0 to 50°C (32 to 122°F)
⻬ Displays in 18 Standard or
Custom Engineering Units
⻬ Displays Ambient
Temperature in °C or °F
⻬ Large, Backlit, 5-Digit
Display with 16.5 mm
(0.65") High Digits and
20-Segment Bar Graph
⻬ Rugged Stainless
Steel Case With
NEMA 4 (IP65) Rating
⻬ Min/Max Recall
⻬ Adjustable Tare Zeros Large
System Offsets
DPG4000-30-KIT,
$1465, shown
smaller than
actual size.
OMEGA’s pressure calibration kits
combine the high accuracy of
DPG4000 Series digital pressure
gauges with a pneumatic or hydraulic
hand pump, providing an excellent
solution for field calibration needs.
Kits include the DPG4000 digital
gauge, hand pump, rugged carrying
case, and a selection of fittings and
hoses. Kits with ranges of 500 psi or
below include a pneumatic hand
pump (PPA500) capable of generating
0 to 500 psi pressure or 0 to 28 inches
of mercury vacuum. For ranges of
1000 psi or higher, a 0 to 10,000 psi
hydraulic pump (PPH10K) is included.
The DPG4000 takes the concept of
a test gauge to a new level. It
combines the accuracy of digital
technology with the simplicity of
an analog gauge, delivering
performance, ease of use, and a
feature set unmatched in the
pressure measurement world.
Setup of the DPG4000 is fast and
A-43
straightforward, involving a menudriven display with minimal text and
intuitive functions. The gauge is
simple enough to be used anywhere
in the world, without the need for
multilingual displays.
See pages G-23 to G-24 for complete
specifications on DPG4000 Series.
![](/html/97/976c/976c97f04eb5c9ef07565493538fab4bc363ed6bb84bd9f3ea7b2605fd3d62ec/bg2.png)
PRESSURE CALIBRATION KIT
Kit includes gauge,
GAUGE SPECIFICATIONS
(0 to 50°C Unless Otherwise Noted)
Accuracy: ±0.05% FS positive pressure,
±0.1% FS for compound models
Temperature Compensation: 0 to 50°C
(32 to 122°F) to rated accuracy
Proof/Burst Pressure: See table
ranges and resolutions for DPG4000,
page G-24
Note: DPG4000 positive pressure ranges up
to and including 100 psig should not be used
for vacuum measurements. Vacuum of
-5 psig will cause permanent damage to the
sensor on low-pressure models. Compound
ranges can be used to measure vacuum and
300 and 500 psi models can be used in
vacuum without damage
Standard Engineering Units: psi, bar,
kg/cm2, inH2O (4°C, 20°C or 60°F),
ftH2O (4°C, 20°C or 60°F), cmH2O
(4°C and 20°C), mH2O (4°C and 20°C),
kPa, mbar, inHg, mmHg, torr
Media Compatibility: Liquids and
gases compatible with 316 SS
Operating Temperature: -10 to 55°C
(14 to 131°F)
Storage Temperature: -20 to 70°C
(-4 to 158°F)
Dimensions: 111 H x 127 W x 38 mm D
(4.375 x 5 x 1.50")
Input Port:
Display: 5-digits, 16.5 mm (0.65") high
Bar Graph: 0 to 100% in 20 segments
Power: 3 “AA” alkaline batteries
(included)
Battery Life: 1500 hr without backlight
(2000 hr at slow sample rate)
Low-Battery Indicator: Icon displayed
near the end of battery life; remaining
battery life can also be displayed on
bar graph
1
⁄4 MNPT lower mount
PUMP SPECIFICATIONS
Pneumatic Hand Pump (PPA500)
Working Media: Air
Hose: Included with
1 m (3')
Hydraulic Hand Pump (PPH10K)
Working Media: Distilled water
preferred, light oils, like mineral oil can be
used, avoid viscous oils, like motor oil
Hose: Included with
1 m (3')
Wetted Parts: Aluminum,
polycarbonate, FKM
Recommended Reference Book:
Temperature, Press,
and Air Flow Measurement
See Section Y For Additional Books
1
⁄8 MNPT fitting,
1
⁄4 MNPT fitting,
OP-6, $265
hand pump, carrying
case and hose.
DPG4000-30-KIT,
$1465, shown
smaller than
actual size.
To Order (Specify Model Number)
MODEL NO. PRICE RANGE HAND PUMP
CALIBRATION KITS WITH GAUGE, HAND PUMP, CARRYING CASE AND HOSE
DPG4000-15-KIT $1465 0 to 15 psi Pneumatic
DPG4000-30-KIT 1465 0 to 30 psi Pneumatic
DPG4000-100-KIT 1465 0 to 100 psi Pneumatic
DPG4000-300-KIT 1465 0 to 300 psi Pneumatic
DPG4000-500-KIT 1465 0 to 500 psi Pneumatic
DPG4000-1K-KIT 1735 0 to 1000 psi Hydraulic
DPG4000-2K-KIT 1735 0 to 2000 psi Hydraulic
DPG4000-3K-KIT 1735 0 to 3000 psi Hydraulic
DPG4000-5K-KIT 1735 0 to 5000 psi Hydraulic
DPG4000-10K-KIT 1770 0 to 10,000 psi Hydraulic
COMPOUND CALIBRATION KITS WITH GAUGE, HAND PUMP, CARRYING
CASE AND HOSE
DPG4000-15C-KIT $1465 ±15 psi Pneumatic
DPG4000-30C-KIT 1465 ±30 psi Pneumatic
Note: Digital gauges come with 3 “AA” batteries, operator’s manual and NIST-traceable
calibration certificate.
Ordering Examples: DPG4000-100-KIT, 0.05% accuracy pressure calibration kit, including
DPG4000 (0 to 100 psig range) and pneumatic pump, $1465.
DPG4000-1K-KIT, 0.05% accuracy pressure calibration kit, including DPG4000 (0 to 1000 psig
range) and hydraulic pump, $1735.
ACCESSORIES
MODEL NO. PRICE DESCRIPTION
DPG4000-RB $25 Protective rubber boot
DPG4000-C32 30 RS232 cable
A
PRESSURE INSTRUMENTS
MOST POPULAR MODELS HIGHLIGHTED!
A-44