Omega Products DPF51-PA1 User Manual

31⁄2 DIGIT MINI-SIZE DC VOLTMETER
3
64 DIN Cutout with 14.2 mm (0.56") LED Display
DPF53 Series
$
All Models
Miniature DIN Case with
24 x 72 mm Bezel
±1999-Count Display SpanAC or DC Power with
Excellent Common Mode Rejection
Display Hold
DPF53-AV2, $150, shown actual size.
The DPF53 is a low-cost 31⁄2 digit dc voltmeter with a full-size 14.2 mm (0.56") LED, yet housed in a small
3
64 DIN case with a 24 x 72 mm
bezel. The case fits into a standard
3
64 DIN cutout, 22.2 x 68 mm (0.87 x 2.68"), and requires a depth of less than 120 mm (4.72") behind the panel, including the standard plug-in screw-clamp connectors.
SPECIFICATIONS
Configuration: Differential, bipolar Zero: Automatic Span Adjustment: ±5% NMR: 56 dB, 50/60 Hz CMR, SIG LO to PWR GND: 120 dB,
DC to 60 Hz CMV, SIG LO to PWR GND: 1500 Vp per HV test, 354 Vp per IEC spacing
CMV, SIG LO to DIG GND: 0V Max Error: ±0.05% rdg ±1 count Span Tempco: ±0.01% rdg/°C Step Response: 1 sec A/D Technique: Dual-slope, avg-value Polarity: Automatic Signal Integration Period: 100 ms Read Rate: 2.5/sec Display Type: 7-segment, LED Height: 14.2 mm (0.56") Symbols: 1.8.8.8 Decimal Points: Three position jumper
selectable behind lens Overrange Indication: Three least significant digits blank AC Voltage: 24, 100, 115 or 230 Vac ±15%, 49 to 63 Hz DC Voltage (non-isolated): 5V dc ±5%, 7 to 32 Vdc
Power Consumption: 1.5 W Operating Ambient:
0 to 60°C (32 to 140°F); 95% RH at 40°C, non-condensing
Bezel: 24 x 72 mm (0.94 x 2.83") Panel Cutout: 22.2 x 68 mm
(0.87 x 2.68")
Depth Behind Bezel (With Connector): 120 mm (4.72") Weight: 200 g (7 oz)
Analog Input
Range ±199.9 mV ±1.999V ±19.99V ±199.9V Resolution 0.1 mV 0.001V 0.001V 0.1V
Maximum Input 130 Vp 250 Vp 250 Vp 250 Vp Input Resistance 1 G 1.1 M 1.0 M 1.0 M Bias Current 50 pA 5 pA 1 pA 1 pA
(100 µV) (1 mV) (10 mV) (100 mV)
AVAILABLE FOR FAST DELIVERY!
To Order (Specify Model Number)
Model No. Price Meter Input Range DPF53-AV2 $150 ±199.9 mV input voltmeter DPF53-AV3 150 ±1.999V input voltmeter DPF53-AV4 150 ±19.99V input voltmeter DPF53-AV5 150 ±19.99V input voltmeter
Options
Order Add'l Suffix Price
-GR N/C Green LED display
-230V N/C 230 Vac power
-100V N/C 100 Vac power
-24VAC N/C 24 Vac power
-5VDC N/C 5 Vdc power, non-isolated
-7/32 N/C 7 to 32 Vdc power, non-isolated
Accessories
Model No. Price Description DPP-2 $425 SPC364 30 NEMA 4X splashproof lens cover TP2 30 Bezel adaptor, 25 x 74 mm (1.0 x 2.9") TP3 30 Bezel adaptor, 3⁄64to RP23 50 19" rack panel for two RP43 55 19" rack panel for four
Comes complete with operator’s manual.
Ordering Examples: DPF53-AV2, DPF53-AV4,
cover, $150 + 30 = $180.
3
DIN size voltmeter, ±19.99V input, 115 Vac power, with SPC364 NEMA 4X lens
64
Recommended Reference Book: Instrumentation and Control Systems,
FW-317, $50. Visit omega.com/bobi for Additional Books
Description
3
64 DIN panel punch
M-9
1
DIN
8
3
64 DIN meters
3
64 DIN meters
3
64 DIN size voltmeter, ±199.9 mV input, 115 Vac power, $150.
31⁄2 DIGIT MINI-SIZE DC PROCESS METERS
3
64 DIN Cutout with 14.2 mm (0.56") LED Display
DPF51 Series
Starts at
$
Miniature DIN Case0.05% of Reading
Accuracy
±1999-Count Display
Span
Input Ranges from
199.9 mV to 100V or 4 to 20 mA
Available with 24V/
10 Vdc Sensor Excitation
AC or DC Power with
Excellent Common Mode Rejection
The DPF51 and DPF52 are low­cost 31⁄2 digit process indicators with a full-size 14.2 mm (0.56") LED, yet housed in a small 3⁄64 DIN case with a 24 x 72 mm bezel. The case fits into a standard 3⁄64 DIN cutout,
22.2 x 68 mm (0.87 x 2.68"), and requires a depth of less than 120 mm (4.72") behind the panel, including the standard plug-in screw-clamp connectors.
SPECIFICATIONS
Max Error: ±0.05% rdg ±1 count Zero Tempco: ±0.01% of offset/°C Span Tempco: ±0.02% of rdg/°C Full-Scale Step Response: 1 sec NMR, SIG HI to SIG LO: 60 dB,
50/60 Hz CMR, SIG GND to SIG LO: 86 dB, dc to 60 Hz CMV, SIG GND to SIG LO: -1 to +2.5 Vdc Power Supply Rejection: 86 dB at 50/60 Hz A/D Technique: Dual-slope, average value
Signal Integration Period: 100 msec Read Rate: 2.5/sec Transmitter Excitation Supply:
Selectable 10V @ 30 mA or 24 Vdc @ 20 mA
Line Regulation: ±0.01%/V of AC power Load Regulation: ±0.5% Tempco: ±0.02%/°C Ripple at 50/60 Hz: ±0.01% Type: 7-segment, LED; 14.2 mm (0.56") Decimal Points: Three positions
jumper-selectable Power: 24, 100, 115 or 230 Vac ±15% @ 2 watts; 49-63 Hz Operating Ambient: 0 to 60°C (32 to 140°F) 95% RH at 40°C (no condensing)
Dimensions: 24 H x 72W x 120 mm D (0.94 x 2.84 x 4.6") Bezel (with TP2 Adaptor): 25 x 75 mm (0.98 x 2.96")
Analog Input
Range 4 to 20 mA 0 to 200 mV 1 to 5V 0 to 10V 0 to 100V Maximum Input 55 mA 250 Vp 250 Vp 250 Vp 250 Vp
Input Resistance 13 1 M 1 M 1 M 1 M Bias Current 50 pA 50 pA 10 pA 5 pA 1 pA
To Order (Specify Model Number)
Model No. Price Input Range Excitation DPF51-PA1 $150 4 to 20 mA DPF51-PV2 150 0 to 199.9 mV DPF51-PV3 150 0 to 5 Vdc DPF51-PV4 150 0 to 10 Vdc DPF51-PV5 150 0 to 100 Vdc DPF52-EA1 199 4 to 20 mA DPF52-EV2 199 0 to 199.9 mV DPF52-EV3 199 0 to 5 Vdc DPF52-EA4 199 0 to 10 Vdc DPF52-EV5 199 0 to 100 Vdc
Options
Order Add'l Suffix Price
-GR N/C Green LED display
-230V N/C 230 Vac power
-100V N/C 100 Vac power
-24VAC N/C 24 Vac power
-5VDC N/C 7 to 32 Vdc power, non-isolated; DPF51 models only
-7/32 N/C 7 to 32 Vdc power, non-isolated DPF51 models only
Comes complete with operator’s manual. See page M-9 for accessories.
Ordering Examples: DPF51-PV4, DPF52-EA1,
with SPC364 NEMA 4 lens cover, $199 + 30 = $229.
3
64
Description
3
64 DIN size indicator, 0 to 10V input, 115 Vac power, $150.
DIN size indicator, 4 to 20 mA input, 24/10V sensor excitation, 115 Vac power,
M-10
DPF51-PA1, $150, shown actual size.
Panel Cutout: 22.2 x 68 mm
(0.87 x 2.68") Weight: 200 g (7 oz)
AVAILABLE FOR FAST DELIVERY!
24 Vdc @ 20 mA,
10 Vdc @ 30 mA selectable
M
Loading...
+ 1 hidden pages